forcePortTransType

VES1724-58V-MIB · .1.3.6.1.4.1.890.1.5.12.49.17.9.1.1

MIB view Table view

Object

column r/w Enumeration

Configures allowed transmission type.
The setting is undefined and system takes settings for transmission type, Annex M, L, I, J, power management, and TX power mode from profile.
If it is set, the settings will be from port settings.
auto: auto selectionn transmission type.
others: allow specified protocol only.

Context

MIB: VES1724-58V-MIB
OID: .1.3.6.1.4.1.890.1.5.12.49.17.9.1.1
Type: column
Access: readwrite
Status: current
Parent: forcePortSettingEntry
Table: forcePortSettingTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	profile
`1`	auto
`2`	vdsl2
`3`	adsl2plus
`4`	adsl2
`5`	gdmt
`6`	glite
`7`	t1413

Related Objects

Sibling Objects

Object	Type	Syntax	OID
forcePortL2PwrDnMax Configures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.10`
forcePortTxPwrMode Configures TX Power Mode. fix: Fix to maximum of rate. power: priority to power. rate: priority to rate.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.11`
forcePortMinInpDs Configure downstream minimum INP for 4.3125KHz carrier space DSL link. The unit is 0.5 symbol.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.12`
forcePortMinInpUs Configure upstream minimum INP for 4.3125KHz carrier space DSL link. The unit is 0.5 symbol.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.13`
forcePortMaxUsTxPwr Configure maximum upstream allowed transmit power. The unit is 0.1 dBm.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.14`
forcePortMaxDsTxPwr Configure maximum downstream allowed transmit power. The unit is 0.1 dBm.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.15`
forcePortMaxUsRxPwr Configure maximum aggregate receive power at the ATU-C. The unit is 0.1 dBm.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.16`
forcePortAnnexM Enable/Disable Annex M. This is ADSL specific setting.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.2`
forcePortAnnexL Enable/Disable Annex L. This is ADSL specific setting.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.3`
forcePortAnnexI Enable/Disable Annex I. This is ADSL specific setting.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.4`
forcePortAnnexJ Enable/Disable Annex J. This is ADSL specific setting.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.5`
forcePortPmMode Configures Power Management operating mode. (used for ADSL2 and ADSL2+ protocol) disable: disable power management. allowL3: dsl could autonomously transmit to idle…	column	Enumeration	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.6`
forcePortL0Time Configures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is seconds.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.7`
forcePortL2Time Configures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is seconds.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.8`
forcePortL2PwrDnStep Configures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.49.17.9.1.9`