uxAlmSuccessfullyboundtonetworkinterface
UX-TRAP-MIB ·
.1.3.6.1.4.1.177.15.2.589843
Object
notification
Successfully bound to network interface. DHCP lease renewed.
Context
- MIB
- UX-TRAP-MIB
- OID
.1.3.6.1.4.1.177.15.2.589843- Type
- notification
- Status
- current
- Parent
- uxTraps
- Siblings
- 181
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| uxAlmApplicationServicerestarted A Sonus SBC Application service was restarted. | notification | - | .1.3.6.1.4.1.177.15.2.1048577 |
| uxAlmActivepartitionswitched System detected a problem during previous boot cycle, active partition has switched automatically. Suggested action - backup the configuration and re-apply the upgrade to the curr… | notification | - | .1.3.6.1.4.1.177.15.2.1048578 |
| uxAlmFailedtomountpartition While booting, one of the partition could not be mounted. Likely a eUSB corruption. Contact Sonus TAC with the information in this alarm. | notification | - | .1.3.6.1.4.1.177.15.2.1048579 |
| uxAlmFailedtosetactivepartition Failed to set active partition.Contact Sonus TAC with the information in this alarm. | notification | - | .1.3.6.1.4.1.177.15.2.1048580 |
| uxAlmAttempttorepairbootparametermismatchfailed Attempt to auto repair boot parmeters failed.Contact Sonus TAC with the information in this alarm. | notification | - | .1.3.6.1.4.1.177.15.2.1048581 |
| uxAlmBootparametermismatchdetected Boot parameter mismatch was detected.Attempting to auto repair. | notification | - | .1.3.6.1.4.1.177.15.2.1048582 |
| uxAlmFailedPoweronmemoryselftest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048583 |
| uxAlmFailedPoweronCoreSwitchtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048584 |
| uxAlmFailedPoweronSecondarySwitchtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048585 |
| uxAlmFailedPoweronexternalQuadPHYtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048586 |
| uxAlmFailedPoweronexternalSinglePHYtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048587 |
| uxAlmFailedPoweronCPUPHYtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048588 |
| uxAlmFailedPoweronTSItest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048589 |
| uxAlmFailedPoweroninternal5PortPHYtest Power-on self test failure. | notification | - | .1.3.6.1.4.1.177.15.2.1048590 |
| uxAlmSystemUpAfterPlannedRestart System up after planned restart. | notification | - | .1.3.6.1.4.1.177.15.2.1048591 |
| uxAlmSystemUpAfterUnplannedRestart System up after unplanned restart. | notification | - | .1.3.6.1.4.1.177.15.2.1048592 |
| uxAlmNoresponse No response to seizure. | notification | - | .1.3.6.1.4.1.177.15.2.1114113 |
| uxAlmRemoteenddidnotbackoffinglare Remote end did not back off in glare. | notification | - | .1.3.6.1.4.1.177.15.2.1114114 |
| uxAlmWinkexpecteddidnotarrive Wink expected, did not arrive. | notification | - | .1.3.6.1.4.1.177.15.2.1114115 |
| uxAlmNodialtone Event of off-hook did not produce dial tone as expected. | notification | - | .1.3.6.1.4.1.177.15.2.1114116 |
| uxAlmCASsignalinggroupdisabled CAS signaling group disabled. | notification | - | .1.3.6.1.4.1.177.15.2.1114117 |
| uxAlmCASlicensenotenabled Call attempted but CAS feature is not enabled. This alarm is cleared by CAS license enabled event. | notification | - | .1.3.6.1.4.1.177.15.2.1114118 |
| uxAlmCASlicenseenabled License manager notify CAS that license is enabled. | notification | - | .1.3.6.1.4.1.177.15.2.1114119 |
| uxAlmWinkReceived Wink failure had occurred, but wink is received now. | notification | - | .1.3.6.1.4.1.177.15.2.1114120 |
| uxAlmDialToneReceived No Dial Tone was received, but Dial Tone is received now. | notification | - | .1.3.6.1.4.1.177.15.2.1114121 |
| uxAlmResponseReceived No Response to seizure was received, but Response is received now. | notification | - | .1.3.6.1.4.1.177.15.2.1114122 |
| uxAlmInvalidcharactersincallingnumber Invalid character(s) removed, correct issue and delete warning. | notification | - | .1.3.6.1.4.1.177.15.2.1114123 |
| uxAlmInvalidcharactersincallednumber Invalid character(s) removed, correct issue and delete warning. | notification | - | .1.3.6.1.4.1.177.15.2.1114124 |
| uxAlmCASsignalinggroupenabled CAS signaling group enabled. | notification | - | .1.3.6.1.4.1.177.15.2.1114125 |
| uxAlmCASR2CDBiterror CAS-R2 CD Bits are mismatched. | notification | - | .1.3.6.1.4.1.177.15.2.1114126 |
| uxAlmCASR2CDBiterrorclear CAS-R2 CD Bits are now matching. | notification | - | .1.3.6.1.4.1.177.15.2.1114127 |
| uxAlmNetworkGlareoccured Network glare occured on this interface. | notification | - | .1.3.6.1.4.1.177.15.2.1114128 |
| uxAlmConfigvalidationfailure Config validation failure during startup. Please check the configuration. | notification | - | .1.3.6.1.4.1.177.15.2.1179649 |
| uxAlmInvalidCardIDEEPROMData A Card was detected with invalid Card ID EEPROM contents (failed CRC-CCITT check). Suggested action - provide the entire alarm message including the numbers at the end to Sonus TA… | notification | - | .1.3.6.1.4.1.177.15.2.131073 |
| uxAlmCardHealthySignalFailure During Line Card activation, a Card Fault was detected after power was applied to the card. The Card will remain out-of-service. Suggested action - reboot system. If issue persis… | notification | - | .1.3.6.1.4.1.177.15.2.131074 |
| uxAlmCardnotSupported A Card was detected which can be identified, but the Sonus SBC system software is unable to support. The Card will remain out-of-service. Suggested action - reboot system. If issu… | notification | - | .1.3.6.1.4.1.177.15.2.131075 |
| uxAlmPowerSupplyinputfailure A Power supply module has indicated a failure of input power. The Sonus SBC System has lost Power Supply redundancy. Suggested action - Verify that the power cable is connected an… | notification | - | .1.3.6.1.4.1.177.15.2.131076 |
| uxAlmPowerSupplyinputrestored A Power Supply module has indicated that input power has been restored. This event clears the 'Power Supply Input Failure' Alarm. | notification | - | .1.3.6.1.4.1.177.15.2.131077 |
| uxAlmPowerSupplyoutputfailure A Power Supply module has indicated a failure of output power. The Sonus SBC System has lost Power Supply redundancy. Suggested action - Verify that the PS is functioning properly. | notification | - | .1.3.6.1.4.1.177.15.2.131078 |
| uxAlmSingleFanfailure Check the System tab to find the Fan ID of the failed fan. Contact Sonus TAC with this information. | notification | - | .1.3.6.1.4.1.177.15.2.131079 |
| uxAlmMultipleFanFailures Check the System tab to find the Fan ID's of the failed fans. Contact Sonus TAC with this information. | notification | - | .1.3.6.1.4.1.177.15.2.131080 |
| uxAlmSystemTemperatureWarm The temperature sensors have indicated that the system is running warm (65°C threshold). | notification | - | .1.3.6.1.4.1.177.15.2.131081 |
| uxAlmSystemTemperatureWarmCleared The temperature sensors have indicated that the system is no longer running warm (55°C threshold). This event clears the 'System Temperature Warm' Alarm. | notification | - | .1.3.6.1.4.1.177.15.2.131082 |
| uxAlmSystemTemperatureHot The temperature sensors have indicated that system is running hot. | notification | - | .1.3.6.1.4.1.177.15.2.131083 |
| uxAlmSystemTemperatureHotCleared The temperature sensors have indicated that the system is no longer running hot (65°C threshold). This event clears the 'System Temperature Hot' Alarm. | notification | - | .1.3.6.1.4.1.177.15.2.131084 |
| uxAlmLicensesexpired License of the node has expired, all the licensed features would fail to work. Contact Sonus Enterprise Sales. | notification | - | .1.3.6.1.4.1.177.15.2.196609 |
| uxAlmLicenseexpiresin2weeks License of the node will expire in 2 weeks. | notification | - | .1.3.6.1.4.1.177.15.2.196610 |
| uxAlmNewLicenseapplied New License is applied on the node. | notification | - | .1.3.6.1.4.1.177.15.2.196611 |
| uxAlmFailedtoApplyLicense Either an invalid key is used, or the license key applies to a different node, or the license key expiry is past the present date. Contact Sonus Sales to obtain a new license. | notification | - | .1.3.6.1.4.1.177.15.2.196612 |
| uxAlmFailedtoacquirelicense The alarm is generated when the required license is not available. Check the number of licensed SIP or TDM channels, the number of SIP registrations, SBA, Transcoding or AD. Sugg… | notification | - | .1.3.6.1.4.1.177.15.2.196613 |
| uxAlmASMUnreachable ASM system can not be reached, system is down. Check whether the ASM is rebooting. | notification | - | .1.3.6.1.4.1.177.15.2.327681 |
| uxAlmClearASMUnreachable Clears alarm 'ASM Unreachable'. | notification | - | .1.3.6.1.4.1.177.15.2.327682 |
| uxAlmASMFailureRecovered ASM system was previously unreachable, but has come up. This alarm doesn't autoclear so the user can investigate the cause, but the system should be working correctly now. | notification | - | .1.3.6.1.4.1.177.15.2.327683 |
| uxAlmASMServicesNotRunning ASM services are not running, calls through the ASM cannot be placed. | notification | - | .1.3.6.1.4.1.177.15.2.327684 |
| uxAlmClearASMServicesNotRunning Clears alarm 'ASM Services Not Running'. | notification | - | .1.3.6.1.4.1.177.15.2.327685 |
| uxAlmASMServicesRecovered ASM Services Recovered. | notification | - | .1.3.6.1.4.1.177.15.2.327686 |
| uxAlmASMServiceRestartFailed The system attempted to restart a failed service on the ASM, service did not start successfully. User interaction is required. | notification | - | .1.3.6.1.4.1.177.15.2.327687 |
| uxAlmASMSystemStarted This event is set when the SBA communication system is first established, and usually indicates that the Application Solution Module (ASM) has finished booting. It should come up … | notification | - | .1.3.6.1.4.1.177.15.2.327688 |
| uxAlmASMSystemShuttingdown A planned or deliberate shut down is taking place on the Application Solution Module (ASM). | notification | - | .1.3.6.1.4.1.177.15.2.327689 |
| uxAlmEthernetLinkDown Ethernet port specified has lost link. Source Instance: Eth0/Eth1 via SBA Monitor. | notification | - | .1.3.6.1.4.1.177.15.2.327690 |
| uxAlmEthernetLinkUp Ethernet port specific has recovered link. | notification | - | .1.3.6.1.4.1.177.15.2.327691 |
| uxAlmASMSBCIPSubnetMismatch The ASM and Sonus SBC IP interfaces are in different subnets and cannot communicate. | notification | - | .1.3.6.1.4.1.177.15.2.327692 |
| uxAlmASMSBCIPSubnetMatch The ASM and Sonus SBC IP interfaces are in the same subnet and can now communicate. | notification | - | .1.3.6.1.4.1.177.15.2.327693 |
| uxAlmConfigurationchangeoccurredonActionSet There is an action set table number/name that should be printed with this event. | notification | - | .1.3.6.1.4.1.177.15.2.458753 |
| uxAlmConfigurationchangeoccurredonNormalizationTable There is a normalization table number/name that should be printed with this event. | notification | - | .1.3.6.1.4.1.177.15.2.458754 |
| uxAlmConfigurationchangeoccurredonRouteTable There is a route table number/name that should be printed with this event. | notification | - | .1.3.6.1.4.1.177.15.2.458755 |
| uxAlmConfigurationchangeoccurredonTransformationTables There is a transformation table number/name that should be printed with this event. | notification | - | .1.3.6.1.4.1.177.15.2.458756 |
| uxAlmRoutetemporarilydisabled This alarm is set if a link is down or some other event has occured to take a route entry out of service. | notification | - | .1.3.6.1.4.1.177.15.2.458757 |
| uxAlmRouteenabled Route came up. | notification | - | .1.3.6.1.4.1.177.15.2.458758 |
| uxAlmACallexceededthelimitfornumberofdestinations A call with destination of X tried to be forked more than the limit allows (currently 8). | notification | - | .1.3.6.1.4.1.177.15.2.458759 |
| uxAlmCallforkingusedwithnoforkinglicense A call with a destination of X was forked with no forking license available. | notification | - | .1.3.6.1.4.1.177.15.2.458760 |
| uxAlmInvocationofInvokeActionSetexceededthemaximumnestinglimit A call with with destination of X tried to execute InvokeActionSet more the the limit allows (currently 10). | notification | - | .1.3.6.1.4.1.177.15.2.458761 |
| uxAlmConfigurationchangeoccurredonCallbackTables There is a PSAP Callback table number/name that should be printed with this event. | notification | - | .1.3.6.1.4.1.177.15.2.458762 |
| uxAlmChannelisinservice Channel is up and is in service. This clears the 'Channel out of service' alarm. | notification | - | .1.3.6.1.4.1.177.15.2.524289 |
| uxAlmChannelisoutofservice Channel Out Of Service Alarm. This alarm is automatically cleared when Channel is in service. | notification | - | .1.3.6.1.4.1.177.15.2.524290 |
| uxAlmEmergencyCallAttempted Emergency Call is Attempted from Calling Number, Calling Extension, Caller IP address. | notification | - | .1.3.6.1.4.1.177.15.2.524291 |
| uxAlmEmergencyCallCompleted Emergency Call Alarm will be cleared after expiry time in emergency status table. | notification | - | .1.3.6.1.4.1.177.15.2.524292 |
| uxAlmSIPServernotresponding SIP server has failed to respond and has been taken out of service. This alarm will be cleared by the event 'SIP server became responsive'. | notification | - | .1.3.6.1.4.1.177.15.2.589825 |
| uxAlmSignalingGrouptakenoutofservice All servers in SG have failed.This alarm will be cleared by 'SIP Signaling group enabled' event. | notification | - | .1.3.6.1.4.1.177.15.2.589826 |
| uxAlmSignalingGroupdisabled Configuration action has changed this Signaling Group from Enabled to Disabled. | notification | - | .1.3.6.1.4.1.177.15.2.589827 |
| uxAlmSIPTLSHandshakeAlertFailure This alarm is generated if TLS Connection failed with an Alert. The connection associated with a TLS Connection ID is aborted. Suggested action - look up the TLS Alert code defini… | notification | - | .1.3.6.1.4.1.177.15.2.589828 |
| uxAlmSIPTLSHandshakeInactivityTimeoutFailure There was long period of inactivity during exchange of handshake messages for an associated TLS Connection ID. Suggested action - if network delays is experienced, tune the config… | notification | - | .1.3.6.1.4.1.177.15.2.589829 |
| uxAlmConfiguredportnumbermismatch Discrepancy of an FQDN/Port configured in the SipServer object that is different than the DNS SRV lookup. A DNS SRV record can return the port number for the selected protocol. Th… | notification | - | .1.3.6.1.4.1.177.15.2.589830 |
| uxAlmSIPServerbecameresponsive SIP server came up. | notification | - | .1.3.6.1.4.1.177.15.2.589831 |
| uxAlmSIPclusterwentdown SIP cluster went down.This is due to all the servers in the clusters are not responsive. This alarm will be cleared by the event 'Sip cluster enabled'. | notification | - | .1.3.6.1.4.1.177.15.2.589832 |
| uxAlmSIPClusterenabled SIP cluster enabled. | notification | - | .1.3.6.1.4.1.177.15.2.589833 |
| uxAlmSIPSignalinggroupenabled SIP Signaling group enabled. | notification | - | .1.3.6.1.4.1.177.15.2.589834 |
| uxAlmSIPSignalinggroupconfigDNSfailure Failed to resolve the FQDN entries in the SIP Signaling Group. Suggested action - check the FQDN syntax. | notification | - | .1.3.6.1.4.1.177.15.2.589835 |
| uxAlmSIPSignalinggroupconfigFQDNresolved Successfully resolved the FQDN of the SIP Signaling group. | notification | - | .1.3.6.1.4.1.177.15.2.589836 |
| uxAlmSIPServerconfigDNSfailure Failed to resolve the SIP server FQDN entries in the SIP Server table. Suggested action - check the FQDN syntax. | notification | - | .1.3.6.1.4.1.177.15.2.589837 |
| uxAlmSIPServerconfigFQDNresolved SIP Server config FQDN resolved. | notification | - | .1.3.6.1.4.1.177.15.2.589838 |
| uxAlmSIPcallsessionDNSfailure Failed to resolve an FQDN with DNS server during a SIP call session. | notification | - | .1.3.6.1.4.1.177.15.2.589839 |
| uxAlmAcquiringlicenseforRegisterfailed Failed to acquire license from License Manager | notification | - | .1.3.6.1.4.1.177.15.2.589840 |
| uxAlmSessionleakorsomeotherresourceleak SIP performs self-check for leaks. Please enable logging for sip and issue 'show resources' command. | notification | - | .1.3.6.1.4.1.177.15.2.589841 |
| uxAlmFailedtobindtonetworkinterface Failed to bind to network interface due to dynamic IP address not available. | notification | - | .1.3.6.1.4.1.177.15.2.589842 |
| uxAlmSIPRegisterServernotresponding SIP Register server has failed to respond. This alarm will be cleared by the event 'SIP Register server became responsive'. | notification | - | .1.3.6.1.4.1.177.15.2.589844 |
| uxAlmSIPRegisterServerbecameresponsive SIP Register server came up. | notification | - | .1.3.6.1.4.1.177.15.2.589845 |
| uxAlmRegistrationnotvalidreceivedstalefalse Stale is False | notification | - | .1.3.6.1.4.1.177.15.2.589846 |
| uxAlmConfigchangeforSIPendpointthatreceivedstalefalse Endpt which had Stale is False has config change | notification | - | .1.3.6.1.4.1.177.15.2.589847 |
| uxAlmDChanneldown The data link layer of the port has come down. | notification | - | .1.3.6.1.4.1.177.15.2.655361 |
| uxAlmDChannelup The data link layer of the port has come back up. | notification | - | .1.3.6.1.4.1.177.15.2.655362 |
| uxAlmCallreleasedduetochannelrestartbyfarend Call released as the ISDN channel has been restarted by far end. | notification | - | .1.3.6.1.4.1.177.15.2.655363 |
| uxAlmADcachingfailed Failed to cache attributes from AD in memory. Suggested action - try again later. This alarm will be cleared by event AD caching successful. | notification | - | .1.3.6.1.4.1.177.15.2.65537 |
| uxAlmOnlineADqueryfailed Failed to execute AD query. Suggested action - confirm that AD is network reachable, check the AD configuration as well as AD access credentials. | notification | - | .1.3.6.1.4.1.177.15.2.65538 |
| uxAlmUserloggedin New user 'username' logged in from 'ip address' at 'time'. | notification | - | .1.3.6.1.4.1.177.15.2.65540 |
| uxAlmUserloginfailed User 'username' login failed from 'ip' at 'time'. This alarm will be cleared by event User logged in. | notification | - | .1.3.6.1.4.1.177.15.2.65541 |
| uxAlmADUnreachable Either AD is network unreachable, or the AD credentials are invalid. This alarm will be cleared by 'AD Reachable' event. | notification | - | .1.3.6.1.4.1.177.15.2.65542 |
| uxAlmADReachable Active directory is now reachable. | notification | - | .1.3.6.1.4.1.177.15.2.65543 |
| uxAlmADcachingsuccessful AD caching was successful. | notification | - | .1.3.6.1.4.1.177.15.2.65544 |
| uxAlmADbackupfailed Failed to backup cached values from AD to storage device. Either the storage device is not present, or it is full. Contact Sonus TAC for further assistance. | notification | - | .1.3.6.1.4.1.177.15.2.65545 |
| uxAlmADsuccessfullybackedup Successful backup of cached values from AD to storage device. | notification | - | .1.3.6.1.4.1.177.15.2.65546 |
| uxAlmADcachetruncated AD Cache is truncated, AD cache results have exceeded the maximum cache size. Consider caching only the required attributes. If the query is not found in cache, Online query will … | notification | - | .1.3.6.1.4.1.177.15.2.65547 |
| uxAlmRADIUSServerUnreachable Either the RADIUS server is network unreachable, or the configuration is incorrect. Suggested action - check shared secret, listening port, RADIUS server IP. This alarm will be c… | notification | - | .1.3.6.1.4.1.177.15.2.65548 |
| uxAlmRADIUSReachable RADIUS server is online. | notification | - | .1.3.6.1.4.1.177.15.2.65549 |
| uxAlmCDRloggingfailed Sonus SBC failed to send CDR to RADIUS based accounting server. Either the server is network unreachable, or the configuration is incorrect. Suggested action - check shared secre… | notification | - | .1.3.6.1.4.1.177.15.2.65550 |
| uxAlmCDRbackupfailed Sonus SBC failed to backup CDR in local file. Either running with low disk space or CDR backup maximum limit is crossed. Suggested action - Free up the disk space or save the CDR … | notification | - | .1.3.6.1.4.1.177.15.2.65551 |
| uxAlmPortdisabledbyoperator The physical layer of the port has been brought down by the operator. | notification | - | .1.3.6.1.4.1.177.15.2.720897 |
| uxAlmPortenabledbyoperator The physical layer of the port has been brought back up by the operator. | notification | - | .1.3.6.1.4.1.177.15.2.720898 |
| uxAlmDS1LoopbackEnter The DS1 has been put into a loopback state by the operator. | notification | - | .1.3.6.1.4.1.177.15.2.720899 |
| uxAlmDS1LoopbackExit The DS1 has been taken out of the loopback state by the operator. | notification | - | .1.3.6.1.4.1.177.15.2.720900 |
| uxAlmRedAlarmLossofSignal The physical layer has detected a Red (LOS) alarm. | notification | - | .1.3.6.1.4.1.177.15.2.720901 |
| uxAlmRedAlarmLossofSignalcleared The physical layer has detected a Red (LOS) alarm clearing. | notification | - | .1.3.6.1.4.1.177.15.2.720902 |
| uxAlmRedAlarmLossofFrame The physical layer has detected a Red (LOF) alarm. | notification | - | .1.3.6.1.4.1.177.15.2.720903 |
| uxAlmRedAlarmLossofFramecleared The physical layer has detected a Red (LOF) alarm clearing. | notification | - | .1.3.6.1.4.1.177.15.2.720904 |
| uxAlmBlueAlarm The physical layer has detected a blue alarm. | notification | - | .1.3.6.1.4.1.177.15.2.720905 |
| uxAlmBlueAlarmCleared The physical layer has detected an alarm clearing. | notification | - | .1.3.6.1.4.1.177.15.2.720906 |
| uxAlmYellowAlarm The physical layer has detected an yellow alarm.This can be originated because of an alarm assert issued by operator or a detection of alarm condition from far end. | notification | - | .1.3.6.1.4.1.177.15.2.720907 |
| uxAlmYellowAlarmCleared The physical layer has detected an yellow alarm clear. | notification | - | .1.3.6.1.4.1.177.15.2.720908 |
| uxAlmPortdisabledasportnotfoundonDS1 This alarm is generated to indicate that a port which was present in the UI is now marked as disabled because the corresponding port was not present on the DS1 physical hardware. | notification | - | .1.3.6.1.4.1.177.15.2.720909 |
| uxAlmClockrecoveryswitchedtoportconfiguredassecondary This alarm is generated to indicate that the primary port from which clock was being recovered has gone down and so clock recovery is now being performed on the secondary port. | notification | - | .1.3.6.1.4.1.177.15.2.720910 |
| uxAlmClockrecoveryswitchovertosecondaryportcleared This event is generated to indicate that the primary port from which clock was being recovered is back in operation and so clock recovery is now being performed on the primary por… | notification | - | .1.3.6.1.4.1.177.15.2.720911 |
| uxAlmClockrecoveryswitchedtofreerunclock This alarm is generated to indicate that the primary and secondary ports from which clock was being recovered have gone down and so clock recovery is now being performed internall… | notification | - | .1.3.6.1.4.1.177.15.2.720912 |
| uxAlmClockrecoveryswitchovertofreerunclockcleared This event is generated to indicate that either the primary or secondary port from which clock was being recovered is back in-service, so clock will be recovered from the in-servi… | notification | - | .1.3.6.1.4.1.177.15.2.720913 |
| uxAlmLinecardnotdetected Line card not detected. | notification | - | .1.3.6.1.4.1.177.15.2.720914 |
| uxAlmLinecarddetected Line card detected. | notification | - | .1.3.6.1.4.1.177.15.2.720915 |
| uxAlmPortdisabledforrelaypassthroughstateactivation Port disabled because the corresponding port is activated for relay passthrough state. | notification | - | .1.3.6.1.4.1.177.15.2.720916 |
| uxAlmPortenabledforrelayonlinestateactivation Port enabled because the corresponding port is re-activated for relay online state. | notification | - | .1.3.6.1.4.1.177.15.2.720917 |
| uxAlmLayer1down The physical layer has detected layer 1 down due to state conditions that results in non-operational state of the BRI port. The physical layer state as per I.430 specification can… | notification | - | .1.3.6.1.4.1.177.15.2.720918 |
| uxAlmLayer1up The physical layer 1 down alarm is cleared with operational state of the BRI port. | notification | - | .1.3.6.1.4.1.177.15.2.720919 |
| uxAlmPortdisabledasportnotfoundonanalogcard Port is now marked as disabled because the corresponding port was not present on the analog physical hardware | notification | - | .1.3.6.1.4.1.177.15.2.720920 |
| uxAlmPortsdisabledforrelaypassthrustatechgonanalogrelaycards Ports are now marked as disabled for activated relay passthrough state on analog FXS/FXO card pair. | notification | - | .1.3.6.1.4.1.177.15.2.720921 |
| uxAlmPortsenabledforrelayonlinestatechangeonanalogrelaycardpairs Ports are now marked as enabled for activated relay passthrough state on analog FXS/FXO card pair. | notification | - | .1.3.6.1.4.1.177.15.2.720922 |
| uxAlmPortstatusdowndetected Line down condition detected. | notification | - | .1.3.6.1.4.1.177.15.2.720923 |
| uxAlmPortstatusup Line down condition cleared. | notification | - | .1.3.6.1.4.1.177.15.2.720924 |
| uxAlmPortdisabledasportnotfoundonBRI This alarm is generated to indicate that a port which was present in the UI is now marked as disabled because the corresponding port was not present on the BRI physical hardware. | notification | - | .1.3.6.1.4.1.177.15.2.720925 |
| uxAlmSystemnotoperational System not operational because DSP cannot be initialized. Contact Sonus TAC with the information in this alarm. | notification | - | .1.3.6.1.4.1.177.15.2.720926 |
| uxAlmDSPnotcomingup This alarm will be generated if a DSP cannot be initialized. If the DSP does not come up, contact Sonus TAC with the information in this alarm. | notification | - | .1.3.6.1.4.1.177.15.2.786433 |
| uxAlmDSPreset This alarm will be generated if a DSP encounters a fatal error condition and has to be reinitialized. | notification | - | .1.3.6.1.4.1.177.15.2.786434 |
| uxAlmDSPCardisUP This event will clear the 'DSP not coming up' and 'DSP reset' alarms. | notification | - | .1.3.6.1.4.1.177.15.2.786435 |
| uxAlmDSPChannelFailure This event will be generated if a DSP channel encounters a fatal error condition and has to be closed. | notification | - | .1.3.6.1.4.1.177.15.2.786436 |
| uxAlmTLSOwnServerCertificatewillExpire The Server certificate will expire in a window time. Suggested Action: Generate, Export CSR and Import a new signed certificate. | notification | - | .1.3.6.1.4.1.177.15.2.851969 |
| uxAlmTLSOwnServerCertificatehasExpired The Server certificate has expired. Suggested Action. Generate, Export CSR and Import a new signed certificate. | notification | - | .1.3.6.1.4.1.177.15.2.851970 |
| uxAlmTLSOwnServerCertificateismissing This Server certificate is found to be missing or has failed validations. Suggested Action. Generate, Export CSR and Import a new signed certificate. | notification | - | .1.3.6.1.4.1.177.15.2.851971 |
| uxAlmTLSSelfSignCertificateGenerationFailed Failed to create a default self signed certificate on the system. | notification | - | .1.3.6.1.4.1.177.15.2.851972 |
| uxAlmNewandValidTLSOwnServerCertificateDetected The Server certificate was uploaded, validated, and good to use in successfully establishing a TLS connection. | notification | - | .1.3.6.1.4.1.177.15.2.851973 |
| uxAlmInvalidSessionofaTLSconnection If a web-client tries to open TLS connection with invalid session-id, BMP will generate this event. | notification | - | .1.3.6.1.4.1.177.15.2.917505 |
| uxAlmBMPTLSHandshakeAlertFailure This alarm will be generated if TLS Connection failed with an Alert. The connection associated with a TLS Connection ID is aborted. | notification | - | .1.3.6.1.4.1.177.15.2.917506 |
| uxAlmBMPTLSHandshakeInactivityTimeoutFailure This alarm will be generated if there was long period of inactivity during exchange of handshake messages for an associated TLS Connection ID. | notification | - | .1.3.6.1.4.1.177.15.2.917507 |
| uxAlmInterfaceoperdown Occurs when an Ethernet port (of ports 1, 2, 3 and 4) is operationally down (e.g. cable unplugged, mismatched speed/duplexity settings) and if administrative state is enabled. Is … | notification | - | .1.3.6.1.4.1.177.15.2.983041 |
| uxAlmInterfaceoperup Is generated when an Ethernet port (of ports 1, 2, 3 and 4) becomes operationally up. This event automatically clears the 'Interface oper down' alarm. | notification | - | .1.3.6.1.4.1.177.15.2.983042 |
| uxAlmInterfaceadminup Is generated when the administrative state of the Port or Logical Interface is configured to be enabled. Is applicable to Sonus SBC 2000 platform only. | notification | - | .1.3.6.1.4.1.177.15.2.983043 |
| uxAlmInterfaceadmindown Is generated when the administrative state of the Port or Logical Interface is configured to be disabled. Is applicable to Sonus SBC 2000 platform only. | notification | - | .1.3.6.1.4.1.177.15.2.983044 |
| uxAlmAdminPortoperdown Is generated when the Admin Port is operationally down (e.g. cable unplugged, mismatched duplex/speed settings). Is applicable to Sonus SBC 2000 platform only. | notification | - | .1.3.6.1.4.1.177.15.2.983045 |
| uxAlmAdminPortoperup Is generated with the port becomes operational after being in an *Admin port oper down* state. Is applicable to Sonus SBC 2000 platform only | notification | - | .1.3.6.1.4.1.177.15.2.983046 |
| uxAlmPortoperdown This event is generated when the port is operationally down.It is generated for Sonus SBC 1000 only. | notification | - | .1.3.6.1.4.1.177.15.2.983047 |
| uxAlmRIPlicensenotenabled RIP feature license is not enabled. | notification | - | .1.3.6.1.4.1.177.15.2.983048 |
| uxAlmOSPFlicensenotenabled OSPF feature license is not enabled. | notification | - | .1.3.6.1.4.1.177.15.2.983049 |
| uxAlmLinkMonitorPeerDown Connection to the monitored host or gateway is down. | notification | - | .1.3.6.1.4.1.177.15.2.983050 |
| uxAlmLinkMonitorPeerReady Connection to the monitored host or gateway is established. | notification | - | .1.3.6.1.4.1.177.15.2.983051 |
| uxAlmTunnelconnectiondisabledbyoperator Tunnel connection is placed Out of Service by operator. | notification | - | .1.3.6.1.4.1.177.15.2.983052 |
| uxAlmTunnelconnectionenabledbyoperator Tunnel connection is placed back in Service by operator. | notification | - | .1.3.6.1.4.1.177.15.2.983053 |
| uxAlmTunnellinklost Tunnel lost communication with the peer. This alarm will be cleared by event 'Tunnel link restored'. | notification | - | .1.3.6.1.4.1.177.15.2.983054 |
| uxAlmTunnellinkrestored Tunnel is successfully established with the peer | notification | - | .1.3.6.1.4.1.177.15.2.983055 |
| uxAlmIPseclicensenotenabled IPsec feature license is not enabled. | notification | - | .1.3.6.1.4.1.177.15.2.983056 |
| uxAlmNegotiatedDuplexityHalf Port negotiated duplexity is half. This degrades the performance. | notification | - | .1.3.6.1.4.1.177.15.2.983057 |
| uxAlmNegotiatedDuplexityFull Port negotiated duplexity is back to full. | notification | - | .1.3.6.1.4.1.177.15.2.983058 |
| uxAlmPreferredlinkdown This event is generated when the preferred link is down. | notification | - | .1.3.6.1.4.1.177.15.2.983059 |
| uxAlmPreferredlinkready This event is generated when the the preferred link is ready for service. This event automatically clears the 'preferred Link down' alarm. | notification | - | .1.3.6.1.4.1.177.15.2.983060 |
| uxAlmTunnelnotificationfailure Tunnel negotiation failed. Suggested Action: Look up the 'Failure Reason' attribute details for the Source in the IPsec Tunnel Table. | notification | - | .1.3.6.1.4.1.177.15.2.983061 |
| uxAlmTunnellocalsubnetsarenonnegotiable This event is generated when one or more local subnet failed negotiation as result of peer config mismatch. | notification | - | .1.3.6.1.4.1.177.15.2.983062 |
| uxAlmTunnelremotesubnetsarenonnegotiable This event is generated when one or more remote subnet failed negotiation as result of peer config mismatch. | notification | - | .1.3.6.1.4.1.177.15.2.983063 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| UX-OBJECTS-MIBuxAlarmActiveIndex Index of Active alarm table | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.1 |
| UX-OBJECTS-MIBuxAlarmConfigIndex Index value of Alarm configuration number | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.2 |
| UX-OBJECTS-MIBuxAlarmActiveID EventID of the active alarm | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.3 |
| UX-OBJECTS-MIBuxAlarmActiveSubID EventID of the active alarm | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.4 |
| UX-OBJECTS-MIBuxAlarmActiveCondition Active alarm/event name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.177.15.1.3.1.5 |
| UX-OBJECTS-MIBuxAlarmActiveSeverity Alarm severity level.
Eg: none
warning
minor
major
critical | column | Enumeration | .1.3.6.1.4.1.177.15.1.3.1.6 |
| UX-OBJECTS-MIBuxAlarmActiveCategory Alarm/event category number. As per Bell Core Standard GR-1248-CORE | column | Enumeration | .1.3.6.1.4.1.177.15.1.3.1.7 |
| UX-OBJECTS-MIBuxAlarmActiveCancelType When an alarm is configured as auto-cancel(1), it clears from
the UX active alarm table, when the condition causing it goes away.
These alarms do not need explicit user interventi… | column | Enumeration | .1.3.6.1.4.1.177.15.1.3.1.8 |
| UX-OBJECTS-MIBuxAlarmActiveDecodeKey Decode key that is used to interpret alarm/event instances when the
alarms are posted to active alarm Table.
The index attribute uxAlarmInstanceID is decoded based … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.177.15.1.3.1.12 |
| UX-OBJECTS-MIBuxAlarmActiveCount Number of times this alert occurred. This count is relevant only for
non-auto-cancelling alerts. | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.11 |
| UX-OBJECTS-MIBuxAlarmActiveState Informs if an active alarm is acknowledged/unacknowledged/cancelled. | column | Enumeration | .1.3.6.1.4.1.177.15.1.3.1.14 |
| UX-OBJECTS-MIBuxAlarmActiveSourceInstance Instance that has generated this alert. This is encoded as
illustrated in the following example :
decode key = shelf;card;port
Source instance = 1;1;1 indicates that the ale… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.177.15.1.3.1.13 |
| UX-OBJECTS-MIBuxAlarmActiveFirstOccur Alarm first occurrence Time displayed in milli sec. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.177.15.1.3.1.9 |
| UX-OBJECTS-MIBuxAlarmActiveLastOccur Alarm last occurrence Time displayed in milli sec. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.177.15.1.3.1.10 |
| UX-OBJECTS-MIBuxAlarmActiveClrEvtID Clearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is set | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.15 |
| UX-OBJECTS-MIBuxAlarmActiveClrEvtSubID Clearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set. | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.16 |
| UX-OBJECTS-MIBuxAlarmActiveDescription Alarm description. Any info user wants to note | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.177.15.1.3.1.17 |
| UX-OBJECTS-MIBuxAlarmActiveHighestSeverityAlarm Highest Severity Active alarm | column | Integer32 | .1.3.6.1.4.1.177.15.1.3.1.18 |
| UX-OBJECTS-MIBuxAlarmActiveHardWareID Hardware ID of the node | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.177.15.1.3.1.19 |