cpmAcInfLineCurrentAve
UEC-STARLINE-MIB ·
.1.3.6.1.4.1.35774.2.1.4.3
Object
scalar
Amps (rms) DisplayString
The enabled line currents (1 to 3), cpmAcInfLineCurrent, summed together then divided by the number of enabled lines. = ((I1 + I2 + I3) / 3) for 3-Phase
Context
- MIB
- UEC-STARLINE-MIB
- OID
.1.3.6.1.4.1.35774.2.1.4.3- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- Amps (rms)
- Parent
- cpmAcInfeed
- Siblings
- 22
Syntax
Amps (rms) DisplayString
- Source
- DisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpmAcInfLineToNeutVoltAve The enabled line-to-neutral voltages (1 to 3),
cpmAcLineToNeutVoltage, summed together
then divided by the number of enabled lines.
= ((VL1N + VL2N + VL3N) / 3) for 3-Phase | scalar | Volts (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.1 |
| cpmAcInfPeakTotActPwrDemand The highest infeed total active power demand measured
since the last operator reset of this value. | scalar | W per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.10 |
| cpmAcInfTotalReactivePower The infeed total reactive power. | scalar | var per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.11 |
| cpmAcInfTotReactivePwrDemand The infeed total reactive power demand. | scalar | var per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.12 |
| cpmAcInfPeakTotReactPwrDmd The highest infeed total reactive power demand
measured since the last operator reset of this value. | scalar | var per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.13 |
| cpmAcInfTotalApparentPower The infeed total apparent power. | scalar | VA DisplayString | .1.3.6.1.4.1.35774.2.1.4.14 |
| cpmAcInfTotApparentPwrDemand The infeed total apparent power demand. | scalar | VA per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.15 |
| cpmAcInfPeakTotApparPwrDmd The highest cpmAcInfTotApparentPwrDemand measured
since the last operator reset of this value. | scalar | VA per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.16 |
| cpmAcInfTotalPowerFactor The total power factor of the infeed. | scalar | DisplayString | .1.3.6.1.4.1.35774.2.1.4.17 |
| cpmAcInfFrequency The frequency of the infeed. | scalar | Hz DisplayString | .1.3.6.1.4.1.35774.2.1.4.18 |
| cpmAcInfTotalEnergy The total energy being consumed via the infeed, since
the last operator reset of this cumulative value. | scalar | kWh DisplayString | .1.3.6.1.4.1.35774.2.1.4.19 |
| cpmAcInfLineToLineVoltAve The enabled line-to-line voltages (1 to 3),
cpmAcLineToLineVoltage, summed together
then divided by the number of enabled lines.
= ((VL1L2 + VL2L3 + VL3L1) / 3) for 3-Phase | scalar | Volts (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.2 |
| cpmAcInfLineCurrentRating The maximum infeed line current allowed per the device rating. | scalar | amps (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.20 |
| cpmAcInfMeasuredNeutralCurr The infeed measured neutral current. | scalar | Amps (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.21 |
| cpmAcInfFrequencyMin The lowest cpmAcInfFrequency measured
since the last operator reset of this value. | scalar | Hz DisplayString | .1.3.6.1.4.1.35774.2.1.4.22 |
| cpmAcInfFrequencyMax The highest cpmAcInfFrequency measured
since the last operator reset of this value. | scalar | Hz DisplayString | .1.3.6.1.4.1.35774.2.1.4.23 |
| cpmAcInfTotLineCurrDemand The infeed total line current demand. | scalar | Amps (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.4 |
| cpmAcInfTotLineCurrPeakDmd The highest cpmAcInfTotLineCurrDemand measured
since the last operator reset of this value. | scalar | Amps (rms) DisplayString | .1.3.6.1.4.1.35774.2.1.4.5 |
| cpmAcInfDemandTime The interval of time over which the demand
is calculated for the infeed parameters. | scalar | minutes DisplayString | .1.3.6.1.4.1.35774.2.1.4.6 |
| cpmAcInfTotalActivePower The infeed total active power. | scalar | W DisplayString | .1.3.6.1.4.1.35774.2.1.4.7 |
| cpmAcInfPeakTotalActivePower The highest infeed total active power measured
since the last operator reset of this value. | scalar | W DisplayString | .1.3.6.1.4.1.35774.2.1.4.8 |
| cpmAcInfTotalActivePwrDemand The infeed total active power demand. | scalar | W per demand interval DisplayString | .1.3.6.1.4.1.35774.2.1.4.9 |