tnPowerMgmtPortIsCommissionedMethod
TROPIC-POWERMGMT-MIB ·
.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.21
Object
column
r/w
Enumeration
.
Context
- MIB
- TROPIC-POWERMGMT-MIB
- OID
.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnPowerMgmtPortEntry
- Table
- tnPowerMgmtPortTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | undetermined |
2 | manual |
3 | autoTurnUp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPowerMgmtPortIsCommissioned Each external LD port whose power management
mode setting is Automatic has a Power Management
Commissioned Flag. When commissioning is completed
these flags are set to complete (t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.1 |
| tnPowerMgmtPortGainAdjTimerLength This is used to enter the length of enablement
time for the OMS section. The unit is in 100s
of ms. Value of -1 means not configured.
Current configurable range: … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.10 |
| tnPowerMgmtPortInGainAdjAutoEnabled This is used to configure line behaviour:
false - no auto adjusts,
true - will enable adjustments, or do auto
adjustments. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.11 |
| tnPowerMgmtPortSRSTiltAdjAutoEnabled If this value is true and line is OADM, controls
updates of the channel set information used for
SRS Adjustment. Value automatically updates at
lines that pull the channel inform… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.12 |
| tnPowerMgmtPortFiberSpanTilt Linear fit of attenuation vs FREQ across defined
channel min, max for tnPowerMgmtFiberSpanTiltPreComp.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.13 |
| tnPowerMgmtPortSRSTiltMaintenanceMode A line parameter that sets SCOT into a maintenance
mode where the auto adjustment triggers are not
sent, and the receiving lines do not respond to
auto triggers. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.14 |
| tnPowerMgmtPortDegreeFunction Used to store the function of the degree. Not
used by power management system. | column | Enumeration | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.15 |
| tnPowerMgmtPortMaxChannels Current configurable range:
4 to 88. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.16 |
| tnPowerMgmtPortEgressAdjustForDownstreamEnabled Current defaults:
Iroadm Cards: 1
Other Cards: 2. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.17 |
| tnPowerMgmtPortFiberSpanTiltL Linear fit of attenuation vs FREQ across defined
channel min, max for tnPowerMgmtFiberSpanTiltPreCompL
for L Band.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.18 |
| tnPowerMgmtPortWTDecoderUsageTypeInL The type of WTD used ingress for L Band. | column | AluWdmWTDecoderUsageType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.19 |
| tnPowerMgmtPortTypeIn The type of power management ingress. | column | TropicPowerMgmtType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.2 |
| tnPowerMgmtPortWTDecoderUsageTypeOutL The type of WTD used egress for L Band. | column | AluWdmWTDecoderUsageType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.20 |
| tnPowerMgmtPortTypeOut The type of power management egress. | column | TropicPowerMgmtType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.3 |
| tnPowerMgmtPortWTDecoderUsageTypeIn The type of WTD used ingress. | column | AluWdmWTDecoderUsageType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.6 |
| tnPowerMgmtPortWTDecoderUsageTypeOut The type of WTD used egress. | column | AluWdmWTDecoderUsageType | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.7 |
| tnPowerMgmtPortGainAdjSchedBase This is used to enter the base period past the
hour for scheduled ingress adjustments. The
unit is in 100s of ms. Value of -1 means not
configured.
Current config… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.8 |
| tnPowerMgmtPortGainAdjTimerPeriod This is used to enter the timer length between
enablements for the OMS section. The unit is in
100s of ms. Value of -1 means not configured.
Current configurable … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.9 |