tnPowerMgmtPortGainAdjTimerLength

TROPIC-POWERMGMT-MIB · .1.3.6.1.4.1.7483.2.1.6.2.1.7.1.10
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
This is used to enter the length of enablement
time for the OMS section.  The unit is in 100s
of ms.  Value of -1 means not configured.
              
Current configurable range: -1 to 35999.

Context

MIB
TROPIC-POWERMGMT-MIB
OID
.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.10
Type
column
Access
readwrite
Status
current
Parent
tnPowerMgmtPortEntry
Table
tnPowerMgmtPortTable
Siblings
18

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnPowerMgmtPortIsCommissioned
Each external LD port whose power management mode setting is Automatic has a Power Management Commissioned Flag. When commissioning is completed these flags are set to complete (t…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.1
tnPowerMgmtPortInGainAdjAutoEnabled
This is used to configure line behaviour: false - no auto adjusts, true - will enable adjustments, or do auto adjustments.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.11
tnPowerMgmtPortSRSTiltAdjAutoEnabled
If this value is true and line is OADM, controls updates of the channel set information used for SRS Adjustment. Value automatically updates at lines that pull the channel inform…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.12
tnPowerMgmtPortFiberSpanTilt
Linear fit of attenuation vs FREQ across defined channel min, max for tnPowerMgmtFiberSpanTiltPreComp. Current configurable range: -300 to 300.
columnmB SNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.13
tnPowerMgmtPortSRSTiltMaintenanceMode
A line parameter that sets SCOT into a maintenance mode where the auto adjustment triggers are not sent, and the receiving lines do not respond to auto triggers.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.14
tnPowerMgmtPortDegreeFunction
Used to store the function of the degree. Not used by power management system.
columnEnumeration.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.15
tnPowerMgmtPortMaxChannels
Current configurable range: 4 to 88.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.16
tnPowerMgmtPortEgressAdjustForDownstreamEnabled
Current defaults: Iroadm Cards: 1 Other Cards: 2.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.17
tnPowerMgmtPortFiberSpanTiltL
Linear fit of attenuation vs FREQ across defined channel min, max for tnPowerMgmtFiberSpanTiltPreCompL for L Band. Current configurable range: -300 to 300.
columnmB SNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.18
tnPowerMgmtPortWTDecoderUsageTypeInL
The type of WTD used ingress for L Band.
columnAluWdmWTDecoderUsageType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.19
tnPowerMgmtPortTypeIn
The type of power management ingress.
columnTropicPowerMgmtType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.2
tnPowerMgmtPortWTDecoderUsageTypeOutL
The type of WTD used egress for L Band.
columnAluWdmWTDecoderUsageType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.20
tnPowerMgmtPortIsCommissionedMethod
.
columnEnumeration.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.21
tnPowerMgmtPortTypeOut
The type of power management egress.
columnTropicPowerMgmtType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.3
tnPowerMgmtPortWTDecoderUsageTypeIn
The type of WTD used ingress.
columnAluWdmWTDecoderUsageType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.6
tnPowerMgmtPortWTDecoderUsageTypeOut
The type of WTD used egress.
columnAluWdmWTDecoderUsageType.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.7
tnPowerMgmtPortGainAdjSchedBase
This is used to enter the base period past the hour for scheduled ingress adjustments. The unit is in 100s of ms. Value of -1 means not configured. Current config…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.8
tnPowerMgmtPortGainAdjTimerPeriod
This is used to enter the timer length between enablements for the OMS section. The unit is in 100s of ms. Value of -1 means not configured. Current configurable …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.1.6.2.1.7.1.9