tnPowerMgmtEgressPortSRSTiltCalcACoeff
TROPIC-POWERMGMT-MIB ·
.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.8
Object
Modeling coefficient for the SRSTilt = A*Pout(mW)
equation.
Current configurable range: 0 to 10000.
Context
- MIB
- TROPIC-POWERMGMT-MIB
- OID
.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnPowerMgmtEgressPortEntry
- Table
- tnPowerMgmtEgressPortTable
- Siblings
- 22
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPowerMgmtEgressPortAdjustPowerWithOptimization . | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.1 |
| tnPowerMgmtEgressPortSRSTiltCalcMultiplier This is used to modify the calculated SRS tilt of the
span.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.10 |
| tnPowerMgmtEgressPortSRSTiltCalcMultiplierL This is used to modify the calculated SRS tilt of the
span for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.11 |
| tnPowerMgmtEgressPortFiberSpanTiltPreComp Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtPortFiberSpanTilt.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.12 |
| tnPowerMgmtEgressPortFiberSpanTiltPreCompL Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtEgressPortFiberSpanTiltL for L Band.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.13 |
| tnPowerMgmtEgressPortSRSCF This parameter should be applied immediately when changed.
Applicable only to C+L systems. Corrects for SRS
contribution between the C and L bands.
Current configu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.14 |
| tnPowerMgmtEgressPortSRSCFL This parameter should be applied immediately when
changed. Applicable only to C+L systems. Corrects
for SRS contribution between the C and L bands.
Current config… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.15 |
| tnPowerMgmtEgressPortSRSTiltPreFraction This is used to modify the fraction of following span
SRS tilt pre compensated.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.16 |
| tnPowerMgmtEgressPortSRSTiltPreFractionL This is used to modify the fraction of following span
SRS tilt pre compensated for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.17 |
| tnPowerMgmtEgressPortCommissioned This attribute indicates if the egress adjustment point
has done a successful adjustment following being in an
un-commissioned state.
true - Adjusted successfully.
false - NE… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.18 |
| tnPowerMgmtEgressPortPassed Indicates the optimization adjust failed or passed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.19 |
| tnPowerMgmtEgressPortAdjustPowerWithOptimizationAbort This attribute allows the network operator to submit
an abort on the currently executing power with
optimization adjustment operation. When read back,
the value of this attribute… | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.2 |
| tnPowerMgmtEgressPortLHLaunchAtten Added to the nominal attenuation lookup by WSS
containing pack. Only applies to connectivity block
in directionless architecture.
Current configurable range: 0 to … | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.20 |
| tnPowerMgmtEgressPortExternalOTAddLaunchAtten Set the service launch attenuation offset for channels
from external transponders added to the degree. | column | mB Unsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.21 |
| tnPowerMgmtEgressPortSmoothing Enable or disable power adjustment smoothing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.22 |
| tnPowerMgmtEgressPortSmoothingMaxStepSize Set maximum step size for power adjustment smoothing. | column | mB Unsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.23 |
| tnPowerMgmtEgressPortAdjustPowerWithOptimizationLastResult The result of the last executed power adjustment with
optimization operation. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.3 |
| tnPowerMgmtEgressPortAdjustPowerWithOptimizationStatus This attribute indicates the status of the executed
power with optimization adjustment operation. | column | TropicPowerMgmtStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.4 |
| tnPowerMgmtEgressPortSRSTiltCalcOutputLoss Configurable loss from the egress Line Out to the
fiber span input.
Current configurable range: 0 to 1700. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.5 |
| tnPowerMgmtEgressPortSRSTiltAdjStatus Status of the tilt adjustment. | column | AluWdmPowerMgmtSRSTiltAdjStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.6 |
| tnPowerMgmtEgressPortSRSTIltAdjResult Result string describing outcome of the tilt adjustment. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.7 |
| tnPowerMgmtEgressPortSRSTiltCalcACoeffL Modeling coefficient for the SRSTilt = A*Pout(mW)
equation for L Band.
Current configurable range: 0 to 10000. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.9 |