tnPowerMgmtEgressPortAdjustPowerWithOptimizationAbort

TROPIC-POWERMGMT-MIB · .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.2

Object

column r/w TROPIC-TCTnCommand

This attribute allows the network operator to submit
an abort on the currently executing power with
optimization adjustment operation.  When read back,
the value of this attribute is noCmd.

Context

MIB: TROPIC-POWERMGMT-MIB
OID: .1.3.6.1.4.1.7483.2.1.6.2.1.21.1.2
Type: column
Access: readwrite
Status: current
Parent: tnPowerMgmtEgressPortEntry
Table: tnPowerMgmtEgressPortTable
Siblings: 22

Syntax

TROPIC-TCTnCommand

Source: TROPIC-TCTnCommand
Base type: Enumeration

Values & Constraints

Type Values

`1`	noCmd
`2`	execute

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnPowerMgmtEgressPortAdjustPowerWithOptimization .	column	TROPIC-TCTnCommand	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.1`
tnPowerMgmtEgressPortSRSTiltCalcMultiplier This is used to modify the calculated SRS tilt of the span. Current configurable range: 0 to 300.	column	100ths SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.10`
tnPowerMgmtEgressPortSRSTiltCalcMultiplierL This is used to modify the calculated SRS tilt of the span for L Band. Current configurable range: 0 to 300.	column	100ths SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.11`
tnPowerMgmtEgressPortFiberSpanTiltPreComp Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtPortFiberSpanTilt. Current configurable range: -300 to 300.	column	mB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.12`
tnPowerMgmtEgressPortFiberSpanTiltPreCompL Amount of fiber span tilt to pre compensate. May not equal to tnPowerMgmtEgressPortFiberSpanTiltL for L Band. Current configurable range: -300 to 300.	column	mB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.13`
tnPowerMgmtEgressPortSRSCF This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current configu…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.14`
tnPowerMgmtEgressPortSRSCFL This parameter should be applied immediately when changed. Applicable only to C+L systems. Corrects for SRS contribution between the C and L bands. Current config…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.15`
tnPowerMgmtEgressPortSRSTiltPreFraction This is used to modify the fraction of following span SRS tilt pre compensated. Current configurable range: 0 to 300.	column	100ths SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.16`
tnPowerMgmtEgressPortSRSTiltPreFractionL This is used to modify the fraction of following span SRS tilt pre compensated for L Band. Current configurable range: 0 to 300.	column	100ths SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.17`
tnPowerMgmtEgressPortCommissioned This attribute indicates if the egress adjustment point has done a successful adjustment following being in an un-commissioned state. true - Adjusted successfully. false - NE…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.18`
tnPowerMgmtEgressPortPassed Indicates the optimization adjust failed or passed.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.19`
tnPowerMgmtEgressPortLHLaunchAtten Added to the nominal attenuation lookup by WSS containing pack. Only applies to connectivity block in directionless architecture. Current configurable range: 0 to …	column	mB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.20`
tnPowerMgmtEgressPortExternalOTAddLaunchAtten Set the service launch attenuation offset for channels from external transponders added to the degree.	column	mB Unsigned32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.21`
tnPowerMgmtEgressPortSmoothing Enable or disable power adjustment smoothing.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.22`
tnPowerMgmtEgressPortSmoothingMaxStepSize Set maximum step size for power adjustment smoothing.	column	mB Unsigned32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.23`
tnPowerMgmtEgressPortAdjustPowerWithOptimizationLastResult The result of the last executed power adjustment with optimization operation.	column	TropicPowerMgmtResult	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.3`
tnPowerMgmtEgressPortAdjustPowerWithOptimizationStatus This attribute indicates the status of the executed power with optimization adjustment operation.	column	TropicPowerMgmtStatus	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.4`
tnPowerMgmtEgressPortSRSTiltCalcOutputLoss Configurable loss from the egress Line Out to the fiber span input. Current configurable range: 0 to 1700.	column	mB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.5`
tnPowerMgmtEgressPortSRSTiltAdjStatus Status of the tilt adjustment.	column	AluWdmPowerMgmtSRSTiltAdjStatus	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.6`
tnPowerMgmtEgressPortSRSTIltAdjResult Result string describing outcome of the tilt adjustment.	column	TropicPowerMgmtResult	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.7`
tnPowerMgmtEgressPortSRSTiltCalcACoeff Modeling coefficient for the SRSTilt = A*Pout(mW) equation. Current configurable range: 0 to 10000.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.8`
tnPowerMgmtEgressPortSRSTiltCalcACoeffL Modeling coefficient for the SRSTilt = A*Pout(mW) equation for L Band. Current configurable range: 0 to 10000.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.1.6.2.1.21.1.9`