tnPowerMgmtEgressExternalOTAddLaunchAtten
TROPIC-POWERMGMT-MIB ·
.1.3.6.1.4.1.7483.2.1.6.2.1.5.1.38
Object
column
r/w
mB Unsigned32
Set the service launch attenuation offset for channels from external transponders added to the degree.
Context
- MIB
- TROPIC-POWERMGMT-MIB
- OID
.1.3.6.1.4.1.7483.2.1.6.2.1.5.1.38- Type
- column
- Access
- readwrite
- Status
- current
- Units
- mB
- Parent
- tnPowerMgmtEgressEntry
- Table
- tnPowerMgmtEgressTable
- Siblings
- 35
Syntax
mB Unsigned32
Values & Constraints
Object Constraints
range: 0-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPowerMgmtEgressAdjustPowerWithOptimization . | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.1 |
| tnPowerMgmtEgressStartAseAdjust Start Amplified Spontaneous Emissions adjustment.
Get requests always return a value of noCmd. | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.10 |
| tnPowerMgmtEgressStopAseAdjust Stop Amplified Spontaneous Emissions adjustment.
Get requests always return a value of noCmd. | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.11 |
| tnPowerMgmtEgressAseAdjustLastResult The result of the last executed ASE adjustment. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.12 |
| tnPowerMgmtEgressAseAdjustStatus This attribute indicates the status of the executed
ASE adjustment operation. | column | TropicPowerMgmtStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.13 |
| tnPowerMgmtEgressCommissioned This attribute indicates if the egress adjustment
point has done a successful adjustment following
being in an un-commissioned state.
true - Adjusted successfully.
false - NE… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.14 |
| tnPowerMgmtEgressAmpIfIndex . | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.15 |
| tnPowerMgmtEgressWssIfIndex . | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.16 |
| tnPowerMgmtEgressSRSTiltCalcMultiplier This is used to modify the calculated SRS tilt of the
span.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.17 |
| tnPowerMgmtEgressSRSTiltPreFraction This is used to modify the fraction of following span
SRS tilt pre compensated.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.18 |
| tnPowerMgmtEgressSRSTiltCalcACoeff Modeling coefficient for the SRSTilt = A*Pout(mW) equation.
Current configurable range: 0 to 10000. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.19 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationStatus This attribute indicates the status of the executed
power with optimization adjustment operation. | column | TropicPowerMgmtStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.2 |
| tnPowerMgmtEgressSRSTiltCalcOutputLoss Configurable loss from the egress Line Out to the fiber
span input.
Current configurable range: 0 to 1700. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.20 |
| tnPowerMgmtEgressSRSTiltAdjResult Result string describing outcome of the tilt adjustment. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.22 |
| tnPowerMgmtEgressSRSTiltAdjStatus Status of the tilt adjustment. | column | AluWdmPowerMgmtSRSTiltAdjStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.23 |
| tnPowerMgmtEgressPassed Indicates the optimization adjust failed or passed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.24 |
| tnPowerMgmtEgressLHLaunchAtten Added to the nominal attenuation lookup by WSS
containing pack. Only applies to connectivity block
in directionless architecture.
Current configurable range: 0 to … | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.25 |
| tnPowerMgmtFiberSpanTiltPreComp Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtPortFiberSpanTilt.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.27 |
| tnPowerMgmtEgressInternodalPpcMaxInDownstream Current range:
-9900, -2000 to 0. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.28 |
| tnPowerMgmtEgressInternodalSpanLossInDownstream Current range:
-9900, 0 to 4000. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.29 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationAbort This attribute allows the network operator to submit
an abort on the currently executing power with
optimization adjustment operation. When read back,
the value of this attribute… | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.3 |
| tnPowerMgmtEgressInternodalPpcMaxInDownstreamReference Current range:
-9900, -2000 to 0. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.30 |
| tnPowerMgmtEgressInternodalSpanLossInDownstreamReference Current range:
-9900, 0 to 4000. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.31 |
| tnPowerMgmtFiberSpanTiltPreCompL Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtPortFiberSpanTiltL for L Band.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.32 |
| tnPowerMgmtEgressSRSTiltCalcMultiplierL This is used to modify the calculated SRS tilt of the
span for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.33 |
| tnPowerMgmtEgressSRSTiltPreFractionL This is used to modify the fraction of following span
SRS tilt pre compensated for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.34 |
| tnPowerMgmtEgressSRSTiltCalcACoeffL Modeling coefficient for the SRSTilt = A*Pout(mW)
equation for L Band.
Current configurable range: 0 to 10000. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.35 |
| tnPowerMgmtEgressSRSCF This parameter should be applied immediately when changed.
Applicable only to C+L systems.
Corrects for SRS contribution between the C and L bands.
Current configur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.36 |
| tnPowerMgmtEgressSRSCFL This parameter should be applied immediately when changed.
Applicable only to C+L systems.
Corrects for SRS contribution between the C and L bands.
Current configur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.37 |
| tnPowerMgmtEgressSmoothing Enable or disable power adjustment smoothing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.39 |
| tnPowerMgmtEgressAcceptPowers . | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.4 |
| tnPowerMgmtEgressSmoothingMaxStepSize Set maximum step size for power adjustment smoothing. | column | mB Unsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.40 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationLastResult The result of the last executed power adjustment
with optimization operation. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.6 |
| tnPowerMgmtEgressAcceptPowersLastResult The result of the last executed power acceptance
operation. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.7 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationTargetGain deprecated . | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.9 |