tnPowerMgmtEgressAdjustPowerWithOptimizationAbort
TROPIC-POWERMGMT-MIB ·
.1.3.6.1.4.1.7483.2.1.6.2.1.5.1.3
Object
This attribute allows the network operator to submit an abort on the currently executing power with optimization adjustment operation. When read back, the value of this attribute is noCmd.
Context
- MIB
- TROPIC-POWERMGMT-MIB
- OID
.1.3.6.1.4.1.7483.2.1.6.2.1.5.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnPowerMgmtEgressEntry
- Table
- tnPowerMgmtEgressTable
- Siblings
- 35
Values & Constraints
Type Values
1 | noCmd |
2 | execute |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPowerMgmtEgressAdjustPowerWithOptimization . | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.1 |
| tnPowerMgmtEgressStartAseAdjust Start Amplified Spontaneous Emissions adjustment.
Get requests always return a value of noCmd. | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.10 |
| tnPowerMgmtEgressStopAseAdjust Stop Amplified Spontaneous Emissions adjustment.
Get requests always return a value of noCmd. | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.11 |
| tnPowerMgmtEgressAseAdjustLastResult The result of the last executed ASE adjustment. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.12 |
| tnPowerMgmtEgressAseAdjustStatus This attribute indicates the status of the executed
ASE adjustment operation. | column | TropicPowerMgmtStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.13 |
| tnPowerMgmtEgressCommissioned This attribute indicates if the egress adjustment
point has done a successful adjustment following
being in an un-commissioned state.
true - Adjusted successfully.
false - NE… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.14 |
| tnPowerMgmtEgressAmpIfIndex . | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.15 |
| tnPowerMgmtEgressWssIfIndex . | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.16 |
| tnPowerMgmtEgressSRSTiltCalcMultiplier This is used to modify the calculated SRS tilt of the
span.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.17 |
| tnPowerMgmtEgressSRSTiltPreFraction This is used to modify the fraction of following span
SRS tilt pre compensated.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.18 |
| tnPowerMgmtEgressSRSTiltCalcACoeff Modeling coefficient for the SRSTilt = A*Pout(mW) equation.
Current configurable range: 0 to 10000. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.19 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationStatus This attribute indicates the status of the executed
power with optimization adjustment operation. | column | TropicPowerMgmtStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.2 |
| tnPowerMgmtEgressSRSTiltCalcOutputLoss Configurable loss from the egress Line Out to the fiber
span input.
Current configurable range: 0 to 1700. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.20 |
| tnPowerMgmtEgressSRSTiltAdjResult Result string describing outcome of the tilt adjustment. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.22 |
| tnPowerMgmtEgressSRSTiltAdjStatus Status of the tilt adjustment. | column | AluWdmPowerMgmtSRSTiltAdjStatus | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.23 |
| tnPowerMgmtEgressPassed Indicates the optimization adjust failed or passed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.24 |
| tnPowerMgmtEgressLHLaunchAtten Added to the nominal attenuation lookup by WSS
containing pack. Only applies to connectivity block
in directionless architecture.
Current configurable range: 0 to … | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.25 |
| tnPowerMgmtFiberSpanTiltPreComp Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtPortFiberSpanTilt.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.27 |
| tnPowerMgmtEgressInternodalPpcMaxInDownstream Current range:
-9900, -2000 to 0. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.28 |
| tnPowerMgmtEgressInternodalSpanLossInDownstream Current range:
-9900, 0 to 4000. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.29 |
| tnPowerMgmtEgressInternodalPpcMaxInDownstreamReference Current range:
-9900, -2000 to 0. | column | mBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.30 |
| tnPowerMgmtEgressInternodalSpanLossInDownstreamReference Current range:
-9900, 0 to 4000. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.31 |
| tnPowerMgmtFiberSpanTiltPreCompL Amount of fiber span tilt to pre compensate. May not
equal to tnPowerMgmtPortFiberSpanTiltL for L Band.
Current configurable range: -300 to 300. | column | mB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.32 |
| tnPowerMgmtEgressSRSTiltCalcMultiplierL This is used to modify the calculated SRS tilt of the
span for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.33 |
| tnPowerMgmtEgressSRSTiltPreFractionL This is used to modify the fraction of following span
SRS tilt pre compensated for L Band.
Current configurable range: 0 to 300. | column | 100ths SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.34 |
| tnPowerMgmtEgressSRSTiltCalcACoeffL Modeling coefficient for the SRSTilt = A*Pout(mW)
equation for L Band.
Current configurable range: 0 to 10000. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.35 |
| tnPowerMgmtEgressSRSCF This parameter should be applied immediately when changed.
Applicable only to C+L systems.
Corrects for SRS contribution between the C and L bands.
Current configur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.36 |
| tnPowerMgmtEgressSRSCFL This parameter should be applied immediately when changed.
Applicable only to C+L systems.
Corrects for SRS contribution between the C and L bands.
Current configur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.37 |
| tnPowerMgmtEgressExternalOTAddLaunchAtten Set the service launch attenuation offset for channels
from external transponders added to the degree. | column | mB Unsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.38 |
| tnPowerMgmtEgressSmoothing Enable or disable power adjustment smoothing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.39 |
| tnPowerMgmtEgressAcceptPowers . | column | TROPIC-TCTnCommand | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.4 |
| tnPowerMgmtEgressSmoothingMaxStepSize Set maximum step size for power adjustment smoothing. | column | mB Unsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.40 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationLastResult The result of the last executed power adjustment
with optimization operation. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.6 |
| tnPowerMgmtEgressAcceptPowersLastResult The result of the last executed power acceptance
operation. | column | TropicPowerMgmtResult | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.7 |
| tnPowerMgmtEgressAdjustPowerWithOptimizationTargetGain deprecated . | column | mB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.1.6.2.1.5.1.9 |