aMACMergeAddFragSize
TROPIC-IEEE8023br-MIB ·
.1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.8
Object
column
r/w
Integer32
A 2-bit integer value used to indicate the value of addFragSize variable used by the Transmit Processing State Diagram.
Context
- MIB
- TROPIC-IEEE8023br-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- macMergeEntityEntry
- Table
- macMergeEntityTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aMACMergePortID aMACMergePortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table. | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.1 |
| aMACMergeFrameSmdErrorCount A count of received MAC frames / MAC frame fragments rejected
due to unknown SMD value or arriving with an SMD-C when no
frame is in progress. The counter is incremented by one
e… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.10 |
| aMACMergeFrameAssOkCount A count of MAC frames that were successfully reassembled
and delivered to MAC. The counter is incremented by one
every time the FRAME_COMPLETE state in the Receive Processing
sta… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.11 |
| aMACMergeFragCountRx A count of the number of additional mPackets received due
to preemption. The counter is incremented by one every time
the state CHECK_FRAG_CNT in the Receive Processing State
Dia… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.12 |
| aMACMergeFragCountTx A count of the number of additional mPackets transmitted due
to preemption. This counter is incremented by one every
time the SEND_SMD_C state in the Transmit Processing State
Di… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.13 |
| aMACMergeHoldCount A count of the number of times the variable hold (see
99.4.7.3) transitions from FALSE to TRUE. This counter
has a maximum increment rate of 160 000 counts per
second at 100 Mb/s. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.14 |
| aMACMergeAcctPolicyId The value of the accounting policy must be defined
prior to associating the policy with the mmac port.
Accounting policies can only be associated with network
ports. A non-zero v… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.15 |
| aMACMergeSupport This attribute indicates (when accessed via a GET
operation) whether the given device supports a MAC
Merge sublayer. The SET operation shall have no
effect on a device. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.2 |
| aMACMergeStatusVerify This attribute indicates (when accessed via a GET
operation) the status of the MAC Merge sublayer
verification on the given device. The SET operation
shall have no effect on a de… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.3 |
| aMACMergeEnableTx This attribute indicates (when accessed via a GET
operation) the status of the MAC Merge sublayer on the
given device in the transmit direction. The status of
the MAC Merge subla… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.4 |
| aMACMergeVerifyDisableTx This attribute indicates (when accessed via a GET
operation) the status of the Verify function of MAC
Merge sublayer on the given device in the transmit
direction. The status of … | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.5 |
| aMACMergeStatusTx This attribute indicates (when accessed via a GET
operation) the status of the MAC Merge sublayer on
the given device in the transmit direction. The SET
operation shall have no e… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.6 |
| aMACMergeVerifyTime The value of this attribute defines the nominal wait
time between verification attempts in milliseconds.
Valid range is 1 to 128 inclusive. The default value
is 10. This attribu… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.7 |
| aMACMergeFrameAssErrorCount A count of MAC frames with reassembly errors. The counter
is incremented by one every time the ASSEMBLY_ERROR state
in the Receive Processing State Diagram is entered. This
coun… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.9 |