tlpPduDevicePhaseImbalance
TRIPPLITE-PRODUCTS ·
.1.3.6.1.4.1.850.1.1.3.2.2.1.1.8
Object
column
percent Integer32
The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all load is on a single phase, the imbalance is defined as 100%.
Context
- MIB
- TRIPPLITE-PRODUCTS
- OID
.1.3.6.1.4.1.850.1.1.3.2.2.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- percent
- Parent
- tlpPduDeviceEntry
- Table
- tlpPduDeviceTable
- Siblings
- 10
Syntax
percent Integer32
Values & Constraints
Object Constraints
range: 0-200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlpPduDeviceMainLoadState The current state of the main output of the device. | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.1 |
| tlpPduDeviceAggregatePowerFactor The aggregate power factor of all phases. | column | 0.1 Watts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.10 |
| tlpPduDeviceOutputCurrentPrecision Output current is reported by tlpPduOutputCurrent, tlpPduOutputCurrentMin
and tlpPduOutputCurrentMax. These values are all reported in hundredths(0.01A),
which accommodates all … | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.11 |
| tlpPduDeviceMainLoadControllable Indicates whether or not the main output is controllable, and whether
the ups can be turned off and on. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.2 |
| tlpPduDeviceMainLoadCommand Reading this value will always return 0. Setting this value to
turnOff(1) will turn off the main output of the ups. Setting this
value to turnOn(2) will turn on the main output of… | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.3 |
| tlpPduDevicePowerOnDelay The configurable delay value, which sets the amount of additional
time a given device will wait before it connects to a valid AC
source. By default the delay value is set to 0. Fo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.4 |
| tlpPduDeviceTotalInputPowerRating The total input power rating of all phases on the device. This
value may not be supported on all models. If not supported, this
value will always return ERROR_NO_SUCH_NAME. | column | Watts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.5 |
| tlpPduDeviceTemperatureC The ambient temperature at or near the PDU casing. Temperature
measurements are not supported on all models. If not supported,
this value will always return ERROR_NO_SUCH_NAME. | column | degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.6 |
| tlpPduDeviceTemperatureF The ambient temperature at or near the PDU casing. Temperature
measurements are not supported on all models. If not supported,
this value will always return ERROR_NO_SUCH_NAME. | column | degrees Fahrenheit SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.7 |
| tlpPduDeviceOutputPowerTotal The AC output total power for all circuits. | column | Watts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.2.2.1.1.9 |