tlpPduDeviceOutputCurrentPrecision

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.2.2.1.1.11
MIB view Table view

Object

column Enumeration 
Output current is reported by tlpPduOutputCurrent, tlpPduOutputCurrentMin 
and tlpPduOutputCurrentMax. These values are all reported in hundredths(0.01A), 
which accommodates all models; however, on any given device the actual precision 
may vary. All current values must be divided by 100 to obtain the actual value. 
For example, if tlpPduOutputCurrent reports 500, then the actual output current 
is 5.00. This tlpPduDeviceOutputCurrentPrecision defines the actual resolution 
of that value: wholeNumber(0) is 5, tenths(1) is 5.0 and hundredths(2) is 5.00.

Context

MIB
TRIPPLITE-PRODUCTS
OID
.1.3.6.1.4.1.850.1.1.3.2.2.1.1.11
Type
column
Access
readonly
Status
current
Parent
tlpPduDeviceEntry
Table
tlpPduDeviceTable
Siblings
10

Syntax

Enumeration

Values & Constraints

Enumerated Values
0wholeNumber
1tenths
2hundredths

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tlpPduDeviceMainLoadState
The current state of the main output of the device.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.2.2.1.1.1
tlpPduDeviceAggregatePowerFactor
The aggregate power factor of all phases.
column0.1 Watts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.10
tlpPduDeviceMainLoadControllable
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.850.1.1.3.2.2.1.1.2
tlpPduDeviceMainLoadCommand
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of…
columnEnumeration.1.3.6.1.4.1.850.1.1.3.2.2.1.1.3
tlpPduDevicePowerOnDelay
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. Fo…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.4
tlpPduDeviceTotalInputPowerRating
The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columnWatts SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.5
tlpPduDeviceTemperatureC
The ambient temperature at or near the PDU casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columndegrees Celsius SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.6
tlpPduDeviceTemperatureF
The ambient temperature at or near the PDU casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columndegrees Fahrenheit SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.7
tlpPduDevicePhaseImbalance
The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all lo…
columnpercent Integer32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.8
tlpPduDeviceOutputPowerTotal
The AC output total power for all circuits.
columnWatts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.2.2.1.1.9