tlpAtsInputHighTransferVoltageUpperBound
TRIPPLITE-PRODUCTS ·
.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.9
Object
The upper boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
Context
- MIB
- TRIPPLITE-PRODUCTS
- OID
.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- Volts
- Parent
- tlpAtsInputEntry
- Table
- tlpAtsInputTable
- Siblings
- 14
Syntax
Volts SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlpAtsInputNominalVoltage The nominal value of the input line voltage. This value may not
be supported on all models. If not supported, this value will return
ERROR_NO_SUCH_NAME. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.1 |
| tlpAtsInputFairVoltageThreshold The voltage level at which the device will transition between sources. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.10 |
| tlpAtsInputBadVoltageThreshold The minimum line voltage allowed before the device disconnects the AC input
connection. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.11 |
| tlpAtsInputSourceAvailability The determination as to which of two AC input lines are available.
The agent will return either inputSourceA(1) or inputSourceB(2) if
only one line is available, or inputSourceAB(… | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.12 |
| tlpAtsInputSourceInUse The determination as to which one of two AC input lines is in use. Not all
devices support the reporting of which source is currently in use. If not
supported, this value will alw… | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.13 |
| tlpAtsInputSourceTransitionCount The number of times the device transitions between primary and secondary
sources. Most devices are limited to 65533 transitions, after which the
value will not increment. If not s… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.14 |
| tlpAtsInputCurrentLimit The capacity of each phase conductor in the ats limited by the AC input
cord or any other potential limiting factors unique to a given unit. If not
supported, this value will alwa… | column | Amps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.15 |
| tlpAtsInputNominalVoltagePhaseToPhase The nominal value of the input line voltage as measured from
phase to phase. This value may not be supported on all models.
If not supported, this value will always return zero. | column | 0.1 Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.2 |
| tlpAtsInputNominalVoltagePhaseToNeutral The nominal value of the input line voltage as measured from
phase to neutral. This value may not be supported on all models.
If not supported, this value will always return zero. | column | 0.1 Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.3 |
| tlpAtsInputBadTransferVoltage The minimum line voltage allowed before the unit disconnects the
AC input connection. | column | 0.1 Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.4 |
| tlpAtsInputBadTransferVoltageLowerBound The lower boundary value of tlpAtsInputBadTransferVoltage as dictated
by the hardware of the unit. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.5 |
| tlpAtsInputBadTransferVoltageUpperBound The upper boundary value of tlpAtsInputBadTransferVoltage as dictated
by the hardware of the unit. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.6 |
| tlpAtsInputHighTransferVoltage The maximum line voltage allowed before the unit disconnects the
AC input connection. | column | 0.1 Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.7 |
| tlpAtsInputHighTransferVoltageLowerBound The lower boundary value of tlpAtsInputHighTransferVoltage as dictated
by the hardware of the unit. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.8 |