tlpAtsInputCurrentLimit

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.15
MIB view Table view

Object

column Amps SNMPv2-SMIUnsigned32 
The capacity of each phase conductor in the ats limited by the AC input
cord or any other potential limiting factors unique to a given unit. If not
supported, this value will always return ERROR_NO_SUCH_NAME.

Context

MIB
TRIPPLITE-PRODUCTS
OID
.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.15
Type
column
Access
readonly
Status
current
Units
Amps
Parent
tlpAtsInputEntry
Table
tlpAtsInputTable
Siblings
14

Syntax

Amps SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tlpAtsInputNominalVoltage
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.1
tlpAtsInputFairVoltageThreshold
The voltage level at which the device will transition between sources.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.10
tlpAtsInputBadVoltageThreshold
The minimum line voltage allowed before the device disconnects the AC input connection.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.11
tlpAtsInputSourceAvailability
The determination as to which of two AC input lines are available. The agent will return either inputSourceA(1) or inputSourceB(2) if only one line is available, or inputSourceAB(…
columnEnumeration.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.12
tlpAtsInputSourceInUse
The determination as to which one of two AC input lines is in use. Not all devices support the reporting of which source is currently in use. If not supported, this value will alw…
columnEnumeration.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.13
tlpAtsInputSourceTransitionCount
The number of times the device transitions between primary and secondary sources. Most devices are limited to 65533 transitions, after which the value will not increment. If not s…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.14
tlpAtsInputNominalVoltagePhaseToPhase
The nominal value of the input line voltage as measured from phase to phase. This value may not be supported on all models. If not supported, this value will always return zero.
column0.1 Volts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.2
tlpAtsInputNominalVoltagePhaseToNeutral
The nominal value of the input line voltage as measured from phase to neutral. This value may not be supported on all models. If not supported, this value will always return zero.
column0.1 Volts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.3
tlpAtsInputBadTransferVoltage
The minimum line voltage allowed before the unit disconnects the AC input connection.
column0.1 Volts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.4
tlpAtsInputBadTransferVoltageLowerBound
The lower boundary value of tlpAtsInputBadTransferVoltage as dictated by the hardware of the unit.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.5
tlpAtsInputBadTransferVoltageUpperBound
The upper boundary value of tlpAtsInputBadTransferVoltage as dictated by the hardware of the unit.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.6
tlpAtsInputHighTransferVoltage
The maximum line voltage allowed before the unit disconnects the AC input connection.
column0.1 Volts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.7
tlpAtsInputHighTransferVoltageLowerBound
The lower boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.8
tlpAtsInputHighTransferVoltageUpperBound
The upper boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
columnVolts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.9