slotInterface
TPT-TPA-HARDWARE-MIB ·
.1.3.6.1.4.1.10734.3.3.2.3.1.1.15
Object
column
IF-MIBInterfaceIndex
The entry in the IF-MIB interface table that corresponds to this port.
Context
- MIB
- TPT-TPA-HARDWARE-MIB
- OID
.1.3.6.1.4.1.10734.3.3.2.3.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hw-slotEntry
- Table
- hw-slotTable
- Siblings
- 19
Values & Constraints
Type Constraints
range: 1..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slotNumber Slot number for this hardware element. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.1 |
| slotStartTime The time (seconds) at which this hardware element was powered up. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.10 |
| slotVendorID The identifying number of the vendor of this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.11 |
| slotDeviceID The PCI bus device ID for this slot. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.12 |
| slotProductID Versioning and other inventory information for this hardware element. | column | OctetString | .1.3.6.1.4.1.10734.3.3.2.3.1.1.13 |
| slotFPGAVersion The version of the TPT FPGA chip on this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.14 |
| slotLineType The line type (e.g., copper or optical) of the port. | column | LineType | .1.3.6.1.4.1.10734.3.3.2.3.1.1.16 |
| slotDuplexState The current duplex state (full or half) of the port. | column | DuplexState | .1.3.6.1.4.1.10734.3.3.2.3.1.1.17 |
| slotPhysical Physical port number for this hardware element (0 if not a port). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.18 |
| slotSfpQualifier1 Type of the SFP transceiver | column | SfpQualifier | .1.3.6.1.4.1.10734.3.3.2.3.1.1.19 |
| slotPort Port number for this hardware element (0 refers to the board). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.1.1.2 |
| slotSfpQualifier2 Type of the SFP transceiver. This is applicable to the dual speed
transceivers, and this variable will have value of the second speed
supported by those transceivers. For single-s… | column | SfpQualifier | .1.3.6.1.4.1.10734.3.3.2.3.1.1.20 |
| slotType Type of hardware element corresponding to slot/port. | column | ManagedElementType | .1.3.6.1.4.1.10734.3.3.2.3.1.1.3 |
| slotCfgType The configuration/redundancy of a hardware element. | column | ConfigRedundancy | .1.3.6.1.4.1.10734.3.3.2.3.1.1.4 |
| slotRunState The high-level hardware state (active, initializing, standby, etc.). | column | HardwareState | .1.3.6.1.4.1.10734.3.3.2.3.1.1.5 |
| slotQualifier1 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.1.1.6 |
| slotQualifier2 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.1.1.7 |
| slotQualifier3 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.1.1.8 |
| slotQualifier4 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.1.1.9 |