fanType
TPT-TPA-HARDWARE-MIB ·
.1.3.6.1.4.1.10734.3.3.2.3.3.1.3
Object
column
ManagedElementType
Type of hardware element -- should always be fan or unequip.
Context
- MIB
- TPT-TPA-HARDWARE-MIB
- OID
.1.3.6.1.4.1.10734.3.3.2.3.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hw-fanEntry
- Table
- hw-fanTable
- Siblings
- 12
Syntax
ManagedElementType
- Source
- ManagedElementType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unequip |
1 | chassis |
2 | backplane |
3 | controller |
4 | network-interface |
5 | network-interface-bcomm |
6 | network-processor |
7 | feature-card |
8 | gige-port |
9 | ten-base-t-port |
10 | hundred-base-t-port |
11 | sonet-atm-port |
12 | sonet-pos-port |
13 | sonet-pos-srp-port |
14 | sdh-atm-port |
15 | sdh-pos-port |
16 | sdh-pos-srp-port |
17 | power-supply |
18 | power-supply-sub-unit |
19 | fan-controller |
20 | fan-sub-unit |
21 | power-entry-module |
22 | vnam-port |
23 | ten-gige-port |
24 | forty-gige-port |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fanSubunit Number of fan sub-unit (0 for controller). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.1 |
| fanStartTime The time (seconds) at which the hardware element was powered up. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.10 |
| fanVendorID The identifying number of the vendor of this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.11 |
| fanDeviceID An identifying number specific to this device. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.12 |
| fanProductID Versioning and other inventory information for this hardware element. | column | OctetString | .1.3.6.1.4.1.10734.3.3.2.3.3.1.13 |
| fanFPGAVersion The version of the TPT FPGA chip on this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.14 |
| fanCfgType The configuration/redundancy of a hardware element. | column | ConfigRedundancy | .1.3.6.1.4.1.10734.3.3.2.3.3.1.4 |
| fanRunState The high-level hardware state (active, initializing, standby, etc.). | column | HardwareState | .1.3.6.1.4.1.10734.3.3.2.3.3.1.5 |
| fanQualifier1 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.6 |
| fanQualifier2 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.7 |
| fanQualifier3 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.8 |
| fanQualifier4 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.9 |