fanQualifier3
TPT-TPA-HARDWARE-MIB ·
.1.3.6.1.4.1.10734.3.3.2.3.3.1.8
Object
column
HardwareStateQual
Further qualification/detail on the high-level hardware state.
Context
- MIB
- TPT-TPA-HARDWARE-MIB
- OID
.1.3.6.1.4.1.10734.3.3.2.3.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hw-fanEntry
- Table
- hw-fanTable
- Siblings
- 12
Syntax
HardwareStateQual
- Source
- HardwareStateQual
- Base type
Enumeration
Values & Constraints
Type Values
0 | port-clear |
1 | degraded |
2 | port-los |
3 | port-lof |
4 | port-oof |
5 | port-lop |
6 | port-signal-degrade |
7 | port-signal-failure |
8 | port-ais-p |
9 | port-ais-l |
10 | port-rdi |
11 | port-forced |
12 | port-lockout |
13 | yellow-alarm |
14 | red-alarm |
15 | parity-err |
16 | crc-err |
17 | unequipped-slot |
18 | blade-pull |
19 | blade-insert |
20 | blade-slot-mismatch |
21 | init-failure |
22 | parent-oos |
23 | removed |
24 | no-info |
25 | over-temp-alarm |
26 | under-temp-alarm |
27 | port-ool |
28 | port-ool-clear |
29 | inhibit |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fanSubunit Number of fan sub-unit (0 for controller). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.1 |
| fanStartTime The time (seconds) at which the hardware element was powered up. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.10 |
| fanVendorID The identifying number of the vendor of this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.11 |
| fanDeviceID An identifying number specific to this device. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.12 |
| fanProductID Versioning and other inventory information for this hardware element. | column | OctetString | .1.3.6.1.4.1.10734.3.3.2.3.3.1.13 |
| fanFPGAVersion The version of the TPT FPGA chip on this hardware. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10734.3.3.2.3.3.1.14 |
| fanType Type of hardware element -- should always be fan or unequip. | column | ManagedElementType | .1.3.6.1.4.1.10734.3.3.2.3.3.1.3 |
| fanCfgType The configuration/redundancy of a hardware element. | column | ConfigRedundancy | .1.3.6.1.4.1.10734.3.3.2.3.3.1.4 |
| fanRunState The high-level hardware state (active, initializing, standby, etc.). | column | HardwareState | .1.3.6.1.4.1.10734.3.3.2.3.3.1.5 |
| fanQualifier1 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.6 |
| fanQualifier2 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.7 |
| fanQualifier4 Further qualification/detail on the high-level hardware state. | column | HardwareStateQual | .1.3.6.1.4.1.10734.3.3.2.3.3.1.9 |