vRtrMplsLspBandwidth
TN-MPLS-MIB ·
.1.3.6.1.4.1.7483.6.1.2.6.1.1.24
Object
The value of vRtrMplsLspBandwidth specifies the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the LSP.
A value of zero (0) indicates that no bandwidth is reserved.
When vRtrMplsLspPathBandwidth is set to -1, the value of
vRtrMplsLspBandwidth is applied to that specific LSP/path.
Context
- MIB
- TN-MPLS-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.6.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Units
- mega-bits per second
- Parent
- vRtrMplsLspEntry
- Table
- vRtrMplsLspTable
- Siblings
- 65
Syntax
mega-bits per second SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspIndex The unique value which identifies this Labeled Switch
Path (LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrI… | column | TN-TC-MIBTmnxVRtrMplsLspID | .1.3.6.1.4.1.7483.6.1.2.6.1.1.1 |
| vRtrMplsLspOutSegIndx The vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.10 |
| vRtrMplsLspRetryTimer The value of vRtrMplsLspRetryTimer specifies the time in seconds
the software will wait before attempting the establish the
failed LSP. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.11 |
| vRtrMplsLspRetryLimit The value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that a… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.12 |
| vRtrMplsLspMetric The value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP wit… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.13 |
| vRtrMplsLspDecrementTtl When the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.14 |
| vRtrMplsLspCspf When the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.15 |
| vRtrMplsLspFastReroute When the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.16 |
| vRtrMplsLspFRHopLimit The value of vRtrMplsLspFRHopLimit specifies the total number
of hops a detour LSP can take before merging back onto the
main LSP path. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.17 |
| vRtrMplsLspFRBandwidth The value of vRtrMplsLspFRBandwidth specified the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the
detour LSP. A value of zero (0) indicates that no bandw… | column | mega-bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.18 |
| vRtrMplsLspClassOfService The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the g… | column | TN-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.6.1.1.19 |
| vRtrMplsLspRowStatus The row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.6.1.2.6.1.1.2 |
| vRtrMplsLspSetupPriority The value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold … | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.20 |
| vRtrMplsLspHoldPriority The value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold pr… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.21 |
| vRtrMplsLspRecord When the value of vRtrMplsLspRecord is 'true', recording of all
the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspRecord is 'false, recording o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.22 |
| vRtrMplsLspPreference The value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egres… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.23 |
| vRtrMplsLspBwProtect When vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guarantee… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.25 |
| vRtrMplsLspHopLimit The value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.26 |
| vRtrMplsLspNegotiatedMTU The value of vRtrMplsLspNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during LSP establishment. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.27 |
| vRtrMplsLspRsvpResvStyle The value of vRtrMplsLspRsvpResvStyle specifies the reservation
style for RSVP. The reservation style can be set to 'Shared-
Explicit' (se) or 'Fixed-Filter' (ff). | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.6.1.1.28 |
| vRtrMplsLspRsvpAdspec When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC
object will be included in RSVP messages.
When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC
object will … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.29 |
| vRtrMplsLspLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.7483.6.1.2.6.1.1.3 |
| vRtrMplsLspFRMethod The value of vRtrMplsLspFRMethod specifies the fast reroute
method used.
In the 'One-to-one Backup' method, a backup LSP is established
which will intersect the ori… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.6.1.1.30 |
| vRtrMplsLspFRNodeProtect Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables
node protection i.e. protection against the failure of a node on
the LSP.
Setting the value to 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.31 |
| vRtrMplsLspAdminGroupInclude The value of vRtrMplsLspAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP is setup. If bit 'n' is set, then the admin grou… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.32 |
| vRtrMplsLspAdminGroupExclude The value of vRtrMplsLspAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP is setup. If bit 'n' is set, then the admin grou… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.33 |
| vRtrMplsLspAdaptive Setting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes
of an already established LSP are changed, either throu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.34 |
| vRtrMplsLspInheritance For each writable object in this row that can be configured to
inherit its value from the corresponding object in the
vRtrMplsGeneralTable, there is bit within vRtrMplsLspInherita… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.35 |
| vRtrMplsLspOptimizeTimer The value of vRtrMplsLspOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP.
When CSPF is enabled, changes… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.36 |
| vRtrMplsLspOperFastReroute The value of vRtrMplsLspOperFastReroute specifies whether the
operational LSP has fast reroute enabled or disabled.
When make-before-break functionality for the LSP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.37 |
| vRtrMplsLspFRObject The value of vRtrMplsLspFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without
the fast reroute object. The value of vRtrMplsLspFR… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.38 |
| vRtrMplsLspHoldTimer The value of vRtrMplsLspHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the service … | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.39 |
| vRtrMplsLspName Administrative name for this Labeled Switch Path.
The vRtrMplsLspName must be unique within a virtual
router instance.
When the value of the object vRtrMplsLspType … | column | TN-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.6.1.1.4 |
| vRtrMplsLspCspfTeMetricEnabled The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by CSPF.
When the value of this object is 'fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.40 |
| vRtrMplsLspP2mpId The value of vRtrMplsLspP2mpId specifies a unique identifier known as
point to multipoint (P2MP) identifier (ID). | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.41 |
| vRtrMplsLspClassType The value of vRtrMplsLspClassType specifies the class type (CT)
associated with this LSP. | column | TN-TC-MIBTmnxRsvpDSTEClassType | .1.3.6.1.4.1.7483.6.1.2.6.1.1.42 |
| vRtrMplsLspOperMetric The value of vRtrMplsLspOperMetric indicates the operational metric
for the LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.43 |
| vRtrMplsLspLdpOverRsvpInclude The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.44 |
| vRtrMplsLspLeastFill The value of vRtrMplsLspLeastFill specifies whether the use of the
least-fill path selection method for the computation of the path of
this LSP is enabled.
By defau… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.45 |
| vRtrMplsLspVprnAutoBindInclude The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.46 |
| vRtrMplsLspMainCTRetryLimit The value of vRtrMplsLspMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.47 |
| vRtrMplsLspIgpShortcut The value of vRtrMplsLspIgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving IGP
routes.
When the value of v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.48 |
| vRtrMplsLspOriginTemplate When the value of the vRtrMplsLspType is 'p2mpAuto', the value of
vRtrMplsLspOriginTemplate indicates the LSP Template which was used
to create this LSP.
For all ot… | column | TN-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.6.1.1.49 |
| vRtrMplsLspAdminState The desired administrative state for this LSP. | column | TN-TC-MIBTmnxAdminState | .1.3.6.1.4.1.7483.6.1.2.6.1.1.5 |
| vRtrMplsLspAutoBandwidth The value of the vRtrMplsLspAutoBandwidth specifies whether automatic
bandwidth adjustment has been enabled or disabled for this LSP.
A value of 'true' specifies th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.50 |
| vRtrMplsLspCspfToFirstLoose The value of the vRtrMplsLspCspfToFirstLoose specifies whether the
CSPF calculation till the first loose hop on ingress Label Edge Router
(LER) is enabled or disabled for this Lab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.51 |
| vRtrMplsLspPropAdminGroup The value of the vRtrMplsLspPropAdminGroup specifies whether the
propagation of session attribute object with resource affinity
(C-type 1) in PATH message is enabled.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.52 |
| vRtrMplsLspBgpShortcut The value of vRtrMplsLspBgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving
BGP routes.
When the value of v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.53 |
| vRtrMplsLspBgpTransportTunnel The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.
When the value… | column | TmnxMplsLspBgpRSVPLSPTunState | .1.3.6.1.4.1.7483.6.1.2.6.1.1.54 |
| vRtrMplsLspSwitchStbyPath The value of vRtrMplsLspSwitchStbyPath specifies whether to
trigger the switch from the current active standby LSP path to a new
LSP path as specified by vRtrMplsLspSwitchStbyPath… | column | TN-TC-MIBTmnxActionType | .1.3.6.1.4.1.7483.6.1.2.6.1.1.55 |
| vRtrMplsLspSwitchStbyPathIndex The value of vRtrMplsLspSwitchStbyPathIndex specifies the
index for the new standby LSP path in mplsTunnelTable.
vRtrMplsLspSwitchStbyPath must also be set to 'doAc… | column | MPLS-TE-MIBMplsTunnelIndex | .1.3.6.1.4.1.7483.6.1.2.6.1.1.56 |
| vRtrMplsLspSwitchStbyPathForce The value of vRtrMplsLspSwitchStbyPathForce specifies whether
to force a switch from an active LSP path to a new standby path
as specified by the values of vRtrMplsLspSwitchStbyPa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.6.1.1.57 |
| vRtrMplsLspExcludeNodeAddrType The value of vRtrMplsLspExcludeNodeAddrType indicates the type of
vRtrMplsLspExcludeNodeAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.7483.6.1.2.6.1.1.58 |
| vRtrMplsLspExcludeNodeAddr When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude
Routers) object will be included in bypass path message with supplied
IP address.
SET the val… | column | OctetString | .1.3.6.1.4.1.7483.6.1.2.6.1.1.59 |
| vRtrMplsLspOperState The current operational state of this LSP. | column | TN-TC-MIBTmnxOperState | .1.3.6.1.4.1.7483.6.1.2.6.1.1.6 |
| vRtrMplsLspIgpShortcutLfaType The value of vRtrMplsLspIgpShortcutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exc… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.6.1.1.60 |
| vRtrMplsLspToAddrType The vRtrMplsLspToAddrType object is an enumerated value that specifies
the destination address type of the LSP.
The value of 'ipv4' specifies an IPv4 address and vR… | column | TmnxMplsLspAddrType | .1.3.6.1.4.1.7483.6.1.2.6.1.1.61 |
| vRtrMplsLspFromAddrType The vRtrMplsLspFromAddrType object is an enumerated value that
specifies the source address type of the LSP.
When the value of vRtrMplsLspFromAddrType is 'ipv4', it… | column | TmnxMplsLspAddrType | .1.3.6.1.4.1.7483.6.1.2.6.1.1.62 |
| vRtrMplsLspToNodeId The value of vRtrMplsLspToNodeId specifies the destination
node id of an MPLS-TP Static LSP.
vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is
set to … | column | TN-TC-MIBTmnxMplsTpNodeID | .1.3.6.1.4.1.7483.6.1.2.6.1.1.63 |
| vRtrMplsLspFromNodeId The value of vRtrMplsLspFromNodeId specifies the source
node id of an MPLS-TP Static LSP.
vRtrMplsLspFromNodeId is configured when vRtrMplsLspFromAddrType is
set to… | column | TN-TC-MIBTmnxMplsTpNodeID | .1.3.6.1.4.1.7483.6.1.2.6.1.1.64 |
| vRtrMplsLspDestGlobalId The value of vRtrMplsLspDestGlobalId specifies the global identifier
for an MPLS-TP Static LSP.
A value of 0 indicates that a locally configured global identifier
i… | column | TN-TC-MIBTmnxMplsTpGlobalID | .1.3.6.1.4.1.7483.6.1.2.6.1.1.65 |
| vRtrMplsLspDestTunnelNum The value of vRtrMplsLspDestTunnelNum specifies the destination
tunnel number of an MPLS-TP Static LSP. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.6.1.1.66 |
| vRtrMplsLspFromAddr Source IP address of this LSP. If vRtrMplsLspFromAddr has not
been explicitly set, the system IP address will be used. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.6.1.2.6.1.1.7 |
| vRtrMplsLspToAddr Destination IP address of this LSP. This LSP will not be
signaled until vRtrMplsLspToAddr is explicitly set. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.6.1.2.6.1.1.8 |
| vRtrMplsLspType The vRtrMplsLspType object is an enumerated value that indicates
whether the label value is statically or dynamically assigned or
whether the LSP will be used exclusively for bypa… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.6.1.1.9 |