tmnxSubAuthPlcyRadAuthSrceAddr
TIMETRA-SUBSCRIBER-MGMT-MIB ·
.1.3.6.1.4.1.6527.3.1.2.33.1.1.1.7
Object
column
r/w
OctetString
The value of tmnxSubAuthPlcyRadAuthSrceAddr specifies the source
address of a radius packet for subscriber authentication. It must be a
valid unicast address (otherwise a wrongValue error is returned).
If this object is configured with the address of the router interface
(ref TIMETRA-VRTR-MIB::vRiaIpAddress) the Radius client uses it while
making a request to the server.
If the address is not configured or is not the address of one of the
interfaces, the source address is based on the address of the Radius
server. If the server address is in-band, the client uses the system
ip address. If it is out-of-band, the source address is the address of
the management interface (The addresses can be found in
TIMETRA-VRTR-MIB::vRiaIpAddress).
Context
- MIB
- TIMETRA-SUBSCRIBER-MGMT-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.33.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxSubAuthPlcyEntry
- Table
- tmnxSubAuthPlcyTable
- Siblings
- 40
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxSubAuthPlcyName The value of tmnxSubAuthPlcyName specifies a specific subscriber
authentication policy. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.1 |
| tmnxSubAuthPlcyReAuthenticate The value of tmnxSubAuthPlcyReAuthenticate specifies whether
authentication must be re-issued when the DHCP lease timer expires.
This field is only applicable for D… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.10 |
| tmnxSubAuthPlcyUserNameFormat The value of tmnxSubAuthPlcyUserNameFormat specifies how the user is
represented when contacting RADIUS server. | column | TmnxSubAuthPlcyUserNameFormat | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.11 |
| tmnxSubAuthPlcyRadAuthVRtrID The value of tmnxSubAuthPlcyRadAuthVRtrID specifies the virtual router
instance applicable for the set of configured RADIUS servers
(tmnxSubAuthPlcyRadServTable). The value of thi… | column | TIMETRA-TC-MIBTmnxVRtrIDOrZero | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.12 |
| tmnxSubAuthPlcyAcceptAuthChange The value of tmnxSubAuthPlcyAcceptAuthChange specifies whether or not
the system should handle the CoA messages initiated by the RADIUS
server, and provide for mid-session interva… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.13 |
| tmnxSubAuthPlcyInclAttributes The value of tmnxSubAuthPlcyInclAttributes specifies what RADIUS
attributes the system should include into RADIUS authentication
request messages. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.14 |
| tmnxSubAuthPlcyRadAuthAlgorithm The value of tmnxSubAuthPlcyRadAuthAlgorithm specifies the algorithm
used to select a RADIUS server from the list of configured servers
(tmnxSubAuthPlcyRadServTable). | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.15 |
| tmnxSubAuthPlcyPppoeAccessMethod The value of tmnxSubAuthPlcyPppoeAccessMethod specifies the
authentication method used to authenticate PPPoE towards the RADIUS
server. | column | TmnxSubAuthPppoeAccessMethod | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.16 |
| tmnxSubAuthPlcyNasPortPfixType The value of tmnxSubAuthPlcyNasPortPfixType specifies what type of
prefix will be added to the NAS-Port attribute if included in RADIUS
authentication request messages. This field… | column | TIMETRA-TC-MIBTmnxSubNasPortPrefixType | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.17 |
| tmnxSubAuthPlcyNasPortPfixString The value of tmnxSubAuthPlcyNasPortPfixString specifies the user
configurable string to be added as prefix to the NAS-Port attribute if
included in RADIUS authentication request m… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.18 |
| tmnxSubAuthPlcyNasPortSfixType The value of tmnxSubAuthPlcyNasPortSfixType specifies what type of
suffix will be added to the NAS-Port attribute if included in RADIUS
authentication request messages. This field… | column | TIMETRA-TC-MIBTmnxSubNasPortSuffixType | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.19 |
| tmnxSubAuthPlcyRowStatus The value of tmnxSubAuthPlcyRowStatus controls the creation and
deletion of rows in the table. An attempt to delete a row that is
referred to in vRtrIfDHCPAuthPolicy will fail wit… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.2 |
| tmnxSubAuthPlcyUserNameAppend The value of tmnxSubAuthPlcyUserNameAppend specifies what will be
appended to the user-name sent to the RADIUS server.
When the value is 'nothing', the user-name wi… | column | TmnxSubAuthPlcyUserNameAppend | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.20 |
| tmnxSubAuthPlcyFallbackAction The value of tmnxSubAuthPlcyFallbackAction specifies the
authentication action in case no RADIUS server is available.
When the value is 'deny', all hosts are denied… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.21 |
| tmnxSubAuthPlcyFallbackUserDb The value of tmnxSubAuthPlcyFallbackUserDb specifies the local user
database to use for authentication while no RADIUS server is
available.
This object is only rele… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.22 |
| tmnxSubAuthPlcyClngStationIdType The value of tmnxSubAuthPlcyClngStationIdType specifies what string
will be put in the RADIUS Calling-Station-Id attribute if included in
RADIUS authentication request messages.
… | column | TIMETRA-TC-MIBTmnxSubCallingStationIdType | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.23 |
| tmnxSubAuthPlcyNasPortTypeType The value of tmnxSubAuthPlcyNasPortTypeType specifies what kind of
value will be put in the RADIUS NAS-Port-Type attribute if included in
RADIUS authentication request messages.
… | column | TIMETRA-TC-MIBTmnxSubNasPortTypeType | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.24 |
| tmnxSubAuthPlcyNasPortTypeValue The value of tmnxSubAuthPlcyNasPortTypeValue specifies what value will
be put in the RADIUS NAS-Port-Type attribute if included in RADIUS
authentication request messages.
… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.25 |
| tmnxSubAuthPlcyPppUserNameOp The value of tmnxSubAuthPlcyPppUserNameOp specifies the operation to
perform on the PAP/CHAP user name.
When the value is 'appendDomain', the string specified by
't… | column | TIMETRA-TC-MIBTmnxSubAuthPlcyUserNameOp | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.26 |
| tmnxSubAuthPlcyPppDomain The value of tmnxSubAuthPlcyPppDomain specifies the domain name to use
with PAP/CHAP user name operations.
This object is only relevant while the value of the objec… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.27 |
| tmnxSubAuthPlcyLastMgmtChange The value of tmnxSubAuthPlcyLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this
Policy. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.3 |
| tmnxSubAuthPlcyRadAuthDownTime The value of tmnxSubAuthPlcyRadAuthDownTime specifies the hold down
time.
If a RADIUS authentication server that was considered 'down' becomes
responsive again, the… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.30 |
| tmnxSubAuthPlcyUserNameOp The value of tmnxSubAuthPlcyUserNameOp specifies the operation to
perform on the user name of DHCP hosts before transmitting it to the
RADIUS server.
When the value… | column | TIMETRA-TC-MIBTmnxSubAuthPlcyUserNameOp | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.31 |
| tmnxSubAuthPlcyDomain The value of tmnxSubAuthPlcyDomain specifies the domain name to use
with user name operations.
This object is only relevant while the value of the object
'tmnxSubAu… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.32 |
| tmnxSubAuthPlcyUserNameMacFormat The value of tmnxSubAuthPlcyUserNameMacFormat specifies how a MAC
address is represented when contacting a RADIUS server.
This is only used while the value of tmnxS… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.33 |
| tmnxSubAuthPlcyRadRespAttrSelect obsolete The value of tmnxSubAuthPlcyRadRespAttrSelect specifies if the rows in
the tmnxSubRadiusAcceptTable are considered to selectively accept
attributes in the authentication response … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.34 |
| tmnxSubAuthPlcyRequestScriptPlcy The value of tmnxSubAuthPlcyRequestScriptPlcy specifies the RADIUS
script policy used to change the RADIUS attributes of the outgoing
Access-Request messages. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.35 |
| tmnxSubAuthPlcyAcceptScriptPlcy The value of tmnxSubAuthPlcyAcceptScriptPlcy specifies the RADIUS
script policy used to change the RADIUS attributes of the incoming
Access-Accept messages. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.36 |
| tmnxSubAuthPlcyCoAScriptPlcy The value of tmnxSubAuthPlcyCoAScriptPlcy specifies the RADIUS script
policy used to change the RADIUS attributes of the incoming
Change-of-Authorization messages. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.37 |
| tmnxSubAuthPlcyAcctSessionIdType The value of tmnxSubAuthPlcyAcctSessionIdType specifies the accounting
session ID type if included in RADIUS authentication request messages.
This field is only applicable if the … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.38 |
| tmnxSubAuthPlcyNasPortBitspec The value of tmnxSubAuthPlcyNasPortBitspec specifies what number will
be put in the RADIUS NAS-Port attribute if included in RADIUS
authentication request messages.
… | column | TIMETRA-TC-MIBTmnxBinarySpecification | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.39 |
| tmnxSubAuthPlcyDescription The value of tmnxSubAuthPlcyDescription specifies the user provided
description of this subscriber authentication policy. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.4 |
| tmnxSubAuthPlcyRadiusServerPlcy The value of tmnxSubAuthPlcyRadiusServerPlcy specifies the RADIUS
server policy as defined in TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable to
be applied in this subscriber authenticati… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.40 |
| tmnxSubAuthPlcyAcctStopOnFail The value of tmnxSubAuthPlcyAcctStopOnFail specifies if and in what
failure condition a RADIUS accounting-stop message indicating the
failure has to be sent.
- onRe… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.41 |
| tmnxSubAuthPlcyFallbackForceProb The value of tmnxSubAuthPlcyFallbackForceProb specifies if the RADIUS
servers are probed, although in 'out-of-service' state, or not.
In case force-probing is true,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.42 |
| tmnxSubAuthPlcyGtpUserNameFormat The value of tmnxSubAuthPlcyGtpUserNameFormat specifies how the
username is represented when contacting a RADIUS server.
This is only used while the value of tmnxSu… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.43 |
| tmnxSubAuthPlcyPassword The value of tmnxSubAuthPlcyPassword specifies the password associated
with the user for going to the RADIUS server. An empty string is
returned on SNMP GET requests. | column | TIMETRA-TC-MIBTmnxAuthPassword | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.5 |
| tmnxSubAuthPlcyRadAuthRetries The value of tmnxSubAuthPlcyRadAuthRetries specifies the number of
RADIUS requests towards the same RADIUS server. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.6 |
| tmnxSubAuthPlcyRadAuthSrceAddrTp The value of tmnxSubAuthPlcyRadAuthSrceAddrTp specifies the type of
host address stored in tmnxSubAuthPlcyRadAuthSrceAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.8 |
| tmnxSubAuthPlcyRadAuthTimeout The value of tmnxSubAuthPlcyRadAuthTimeout specifies, in seconds,
between authentication request retries towards the same RADIUS server. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.33.1.1.1.9 |