tmnxSatSyncIfTimingSystemQltyLvl
TIMETRA-SATELLITE-MIB ·
.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.17
Object
column
TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
The value of tmnxSatSyncIfTimingSystemQltyLvl indicates the quality level of the system timing reference for the satellite. This is normally the quality level of the selected timing reference. If no timing reference has been selected, it indicates the freerun/holdover quality of the system.
Context
- MIB
- TIMETRA-SATELLITE-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxSatelliteSyncIfTimingEntry
- Table
- tmnxSatelliteSyncIfTimingTable
- Siblings
- 16
Syntax
TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
- Source
- TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | prs |
2 | stu |
3 | st2 |
4 | tnc |
5 | st3e |
6 | st3 |
7 | smc |
8 | st4 |
9 | dus |
10 | prc |
11 | ssua |
12 | ssub |
13 | sec |
14 | dnu |
15 | inv |
16 | pno |
17 | eec1 |
18 | eec2 |
19 | failed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxSatSyncIfTimingRef1SrcPort The value of tmnxSatSyncIfTimingRef1SrcPort indicates the source port
of the first timing reference for the satellite.
A value of '1e000000'H indicates that there i… | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.1 |
| tmnxSatSyncIfTimingRef2InUse The value of tmnxSatSyncIfTimingRef2InUse indicates whether the second
timing reference for the satellite is presently being used by the
synchronous timing subsystem. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.10 |
| tmnxSatSyncIfTimingRef2Qualified The value of tmnxSatSyncIfTimingRef2Qualified indicates whether the
second timing reference for the satellite is qualified for use by the
synchronous timing subsystem. If the val… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.11 |
| tmnxSatSyncIfTimingRef2Alarm The value of tmnxSatSyncIfTimingRef2Alarm indicates the alarms on the
second reference for the satellite. If any of the bits are set, then
the second reference is disqualified by… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.12 |
| tmnxSatSyncIfTimingRef2RxQltyLvl The value of tmnxSatSyncIfTimingRef2RxQltyLvl indicates the received
SSM Quality Level of the second reference for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.13 |
| tmnxSatSyncIfTimingRef2State The value of tmnxSatSyncIfTimingRef2State indicates the operational
state of the timing for the second reference on the satellite. | column | TIMETRA-CHASSIS-MIBTmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.14 |
| tmnxSatSyncIfTimingFreqOffset The value of tmnxSatSyncIfTimingFreqOffset indicates the frequency
offset of the current selected timing reference for the satellite, in
parts per million (ppm). | column | parts-per-million SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.15 |
| tmnxSatSyncIfTimingStatus The value of tmnxSatSyncIfTimingStatus indicates the present status of
the Synchronous Timing Equipment Source (SETS) for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxSETSStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.16 |
| tmnxSatSyncIfTimingRef1AdmStatus The value of tmnxSatSyncIfTimingRef1AdmStatus indicates the
administrative status of the first timing reference for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.2 |
| tmnxSatSyncIfTimingRef1InUse The value of tmnxSatSyncIfTimingRef1InUse indicates whether the first
timing reference for the satellite is presently being used by the
synchronous timing subsystem. If it is in … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.3 |
| tmnxSatSyncIfTimingRef1Qualified The value of tmnxSatSyncIfTimingRef1Qualified indicates whether the
first timing reference for the satellite is qualified for use by the
synchronous timing subsystem. If the valu… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.4 |
| tmnxSatSyncIfTimingRef1Alarm The value of tmnxSatSyncIfTimingRef1Alarm indicates the alarms on the
first reference for the satellite. If any of the bits are set, then
the first reference is disqualified by th… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.5 |
| tmnxSatSyncIfTimingRef1RxQltyLvl The value of tmnxSatSyncIfTimingRef1RxQltyLvl indicates the received
SSM Quality Level of the first reference for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.6 |
| tmnxSatSyncIfTimingRef1State The value of tmnxSatSyncIfTimingRef1State indicates the operational
state of the timing for the first reference on the satellite. | column | TIMETRA-CHASSIS-MIBTmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.7 |
| tmnxSatSyncIfTimingRef2SrcPort The value of tmnxSatSyncIfTimingRef2SrcPort indicates the source port
of the second timing reference for the satellite.
A value of '1e000000'H indicates that there … | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.8 |
| tmnxSatSyncIfTimingRef2AdmStatus The value of tmnxSatSyncIfTimingRef2AdmStatus indicates the
administrative status of the second timing reference for the
satellite. | column | TIMETRA-CHASSIS-MIBTmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.9 |