tmnxSatSyncIfTimingRef2RxQltyLvl
TIMETRA-SATELLITE-MIB ·
.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.13
Object
column
TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
The value of tmnxSatSyncIfTimingRef2RxQltyLvl indicates the received SSM Quality Level of the second reference for the satellite.
Context
- MIB
- TIMETRA-SATELLITE-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxSatelliteSyncIfTimingEntry
- Table
- tmnxSatelliteSyncIfTimingTable
- Siblings
- 16
Syntax
TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
- Source
- TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | prs |
2 | stu |
3 | st2 |
4 | tnc |
5 | st3e |
6 | st3 |
7 | smc |
8 | st4 |
9 | dus |
10 | prc |
11 | ssua |
12 | ssub |
13 | sec |
14 | dnu |
15 | inv |
16 | pno |
17 | eec1 |
18 | eec2 |
19 | failed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxSatSyncIfTimingRef1SrcPort The value of tmnxSatSyncIfTimingRef1SrcPort indicates the source port
of the first timing reference for the satellite.
A value of '1e000000'H indicates that there i… | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.1 |
| tmnxSatSyncIfTimingRef2InUse The value of tmnxSatSyncIfTimingRef2InUse indicates whether the second
timing reference for the satellite is presently being used by the
synchronous timing subsystem. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.10 |
| tmnxSatSyncIfTimingRef2Qualified The value of tmnxSatSyncIfTimingRef2Qualified indicates whether the
second timing reference for the satellite is qualified for use by the
synchronous timing subsystem. If the val… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.11 |
| tmnxSatSyncIfTimingRef2Alarm The value of tmnxSatSyncIfTimingRef2Alarm indicates the alarms on the
second reference for the satellite. If any of the bits are set, then
the second reference is disqualified by… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.12 |
| tmnxSatSyncIfTimingRef2State The value of tmnxSatSyncIfTimingRef2State indicates the operational
state of the timing for the second reference on the satellite. | column | TIMETRA-CHASSIS-MIBTmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.14 |
| tmnxSatSyncIfTimingFreqOffset The value of tmnxSatSyncIfTimingFreqOffset indicates the frequency
offset of the current selected timing reference for the satellite, in
parts per million (ppm). | column | parts-per-million SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.15 |
| tmnxSatSyncIfTimingStatus The value of tmnxSatSyncIfTimingStatus indicates the present status of
the Synchronous Timing Equipment Source (SETS) for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxSETSStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.16 |
| tmnxSatSyncIfTimingSystemQltyLvl The value of tmnxSatSyncIfTimingSystemQltyLvl indicates the quality
level of the system timing reference for the satellite. This is
normally the quality level of the selected tim… | column | TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.17 |
| tmnxSatSyncIfTimingRef1AdmStatus The value of tmnxSatSyncIfTimingRef1AdmStatus indicates the
administrative status of the first timing reference for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.2 |
| tmnxSatSyncIfTimingRef1InUse The value of tmnxSatSyncIfTimingRef1InUse indicates whether the first
timing reference for the satellite is presently being used by the
synchronous timing subsystem. If it is in … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.3 |
| tmnxSatSyncIfTimingRef1Qualified The value of tmnxSatSyncIfTimingRef1Qualified indicates whether the
first timing reference for the satellite is qualified for use by the
synchronous timing subsystem. If the valu… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.4 |
| tmnxSatSyncIfTimingRef1Alarm The value of tmnxSatSyncIfTimingRef1Alarm indicates the alarms on the
first reference for the satellite. If any of the bits are set, then
the first reference is disqualified by th… | column | TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.5 |
| tmnxSatSyncIfTimingRef1RxQltyLvl The value of tmnxSatSyncIfTimingRef1RxQltyLvl indicates the received
SSM Quality Level of the first reference for the satellite. | column | TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.6 |
| tmnxSatSyncIfTimingRef1State The value of tmnxSatSyncIfTimingRef1State indicates the operational
state of the timing for the first reference on the satellite. | column | TIMETRA-CHASSIS-MIBTmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.7 |
| tmnxSatSyncIfTimingRef2SrcPort The value of tmnxSatSyncIfTimingRef2SrcPort indicates the source port
of the second timing reference for the satellite.
A value of '1e000000'H indicates that there … | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.8 |
| tmnxSatSyncIfTimingRef2AdmStatus The value of tmnxSatSyncIfTimingRef2AdmStatus indicates the
administrative status of the second timing reference for the
satellite. | column | TIMETRA-CHASSIS-MIBTmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.103.3.3.1.9 |