tRPOperPSFromCriteriaOspfRouteType
TIMETRA-ROUTE-POLICY-MIB ·
.1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.14
Object
column
TOspfRouteType
The OSPF route type to match on. Set to zero to disable.
Context
- MIB
- TIMETRA-ROUTE-POLICY-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tRPOperPSFromCriteriaEntry
- Table
- tRPOperPSFromCriteriaTable
- Siblings
- 35
Syntax
TOspfRouteType
- Source
- TOspfRouteType
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tRPOperPSFromCriteriaIndex The policy statement entry ID | column | TPolicyStatementEntryID | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.1 |
| tRPOperPSFromCriteriaPrefixList5 The name of the fifth prefix list to match on. Set to empty string to
disable.
This object is the same as tRPOperPSFromCritPrefixList5, please use
tRPOperPSFromCrit… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.10 |
| tRPOperPSFromCriteriaASPath The name of the AS Path to match on. Set to empty string to disable. | column | TASPathName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.11 |
| tRPOperPSFromCriteriaCommunity The name of the community to match on. Set to empty string to disable. | column | TLCommunityName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.12 |
| tRPOperPSFromCriteriaOrigin The value of tRPOperPSFromCriteriaOrigin indicates the route match
criterion for an entry. | column | TPolicyEntryCriteriaOrigin | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.13 |
| tRPOperPSFromCriteriaEntryLastChanged obsolete Timestamp of last change to this entry.
tRPOperPSFromCriteriaEntryLastChanged is obsoleted in release 5.0.
TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.15 |
| tRPOperPSFromCriteriaArea Used when redistributing OSPF routes into other protocols. Specifies
the OSPF area that must be matched in filtered routes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.16 |
| tRPOperPSFromCriteriaAreaConfigured Specifies if the tRPOperPSFromCriteriaArea has been configured | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.17 |
| tRPOperPSFromCriteriaIsisLevel The value for tRPOperPSFromCriteriaIsisLevel defines the IS-IS route
level match criterion. A value of 0 indicates that no IS-IS route
level match criterion has been configured. | column | TIsisLevel | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.18 |
| tRPOperPSFromCriteriaIsisExternal When tRPOperPSFromCriteriaIsisExternal is 'true', match only External
IS-IS routes. If 'false', match all routes. External IS-IS routes are
those routes that have been learned fro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.19 |
| tRPOperPSFromCriteriaRowStatus RowStatus for this row.
To create or destroy entries in this table, use the
tRPAdminPSFromCriteriaTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.2 |
| tRPOperPSFromCriteriaIgmpHostPrefixList tRPOperPSFromCriteriaIgmpHostPrefixList contains the name of the
prefix list that is used to match the IGMP/MLD host IP address. The
value of the object will be an empty string if… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.20 |
| tRPOperPSFromCriteriaGrpAddrPrefixList tRPOperPSFromCriteriaGrpAddrPrefixList contains the name of the prefix
list that is used to match the multicast group address. The value of
the object will be an empty string if i… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.21 |
| tRPOperPSFromCriteriaSrcAddr tRPOperPSFromCriteriaSrcAddr contains the IP address of the source to
match on. This object will be used by multicast protocols like PIM and
IGMP/MLD. The value of this object wil… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.22 |
| tRPOperPSFromCriteriaInterface tRPOperPSFromCriteriaInterface contains the name of the interface to
match on. PIM Bootstrap route policy will use this object to
accept/reject bootstrap messages coming on the in… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.23 |
| tRPOperPSFromCriteriaTag The value of tRPOperPSFromCriteriaTag indicates the operational tag to
match on. It will only be valid when tRPOperPSFromCriteriaMatchTag is
enabled which indicates that route mat… | column | TPolicyActionTag | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.24 |
| tRPOperPSFromCritNbrInetAddrType The value of tRPOperPSFromCritNbrInetAddrType indicates the type of
tRPOperPSFromCritNbrInetAddr address, as defined in the InetAddress
MIB. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.25 |
| tRPOperPSFromCritNbrInetAddr The value of tRPOperPSFromCritNbrInetAddr indicates the IP address of
neighbor to match on. The object tRPOperPSFromCritNbrInetAddr is
disabled if it holds the value ff:ff:ff:ff.
… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.26 |
| tRPOperPSFromCritSrcInetAddrType The value of tRPOperPSFromCritSrcInetAddrType indicates the type of
tRPOperPSFromCritSrcInetAddr address, as defined in the InetAddress
MIB. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.27 |
| tRPOperPSFromCritSrcInetAddr The value of tRPOperPSFromCritSrcInetAddr indicates the IP address of
the source to match on. This object will be used by multicast
protocols like PIM and IGMP/MLD and is disabled… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.28 |
| tRPOperPSFromCriteriaFamily The bits set in the value of tRPAdminPSFromCriteriaFamily indicate
the address families that this condition would match against. | column | TIMETRA-TC-MIBTmnxBGPFamilyType | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.29 |
| tRPOperPSFromCriteriaProtocol deprecated The protocol name to match on. Set to none(1) to disable.
This object is deprecated, please use the object
tRPOperPSFromCritProtocolBits instead. | column | TRoutePolicyProtocol | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.3 |
| tRPOperPSFromCriteriaInstanceId The value of tRPOperPSFromCriteriaInstanceId indicates the instance
identifier of the ISIS or OSPF(v3) protocol running in the router
instance.
The value of tRPOper… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.30 |
| tRPOperPSFromCriteriaMatchTag The value of tRPOperPSFromCriteriaMatchTag indicates if tag matching
is enabled or disabled. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.31 |
| tRPOperPSFromCriteriaState The value of tRPOperPSFromCriteriaState indicates the route state
match criterion for this entry. | column | TPolicyEntryCriteriaState | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.32 |
| tRPOperPSFromCritASPathGroup The value of tRPOperPSFromCritASPathGroup indicates the AS-Path Group
match criterion for this entry. | column | TASPathGroupName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.33 |
| tRPOperPSFromCriteriaPolicy The value of tRPOperPSFromCriteriaPolicy indicates the policy match
criterion for this entry. | column | TIMETRA-TC-MIBTXLPolicyNameOrExpOrEmpty | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.34 |
| tRPOperPSFromCritCreationOrigin The value of the object tRPOperPSFromCritCreationOrigin indicates the
mechanism used to create this entry. | column | TIMETRA-TC-MIBTmnxCreateOrigin | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.35 |
| tRPOperPSFromCritProtocolBits The value of tRPOperPSFromCritProtocolBits indicates the protocol name
to match on.
When the 'none' bit is set, the protocol match criteria is disabled. | column | TRoutePolicyProtocolBits | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.36 |
| tRPOperPSFromCriteriaNeighborIpAddr The IP address of neighbor to match on. Set to 255.255.255.255 to
disable. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.4 |
| tRPOperPSFromCriteriaNeighborPrefixList The name of a neighbor prefix list to match on. Set to empty string to
disable. | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.5 |
| tRPOperPSFromCriteriaPrefixList1 The name of the first prefix list to match on. Set to empty string to
disable.
This object is the same as tRPOperPSFromCritPrefixList1, please use
tRPOperPSFromCrit… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.6 |
| tRPOperPSFromCriteriaPrefixList2 The name of the second prefix list to match on. Set to empty string to
disable.
This object is the same as tRPOperPSFromCritPrefixList2, please use
tRPOperPSFromCri… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.7 |
| tRPOperPSFromCriteriaPrefixList3 The name of the third prefix list to match on. Set to empty string to
disable.
This object is the same as tRPOperPSFromCritPrefixList3, please use
tRPOperPSFromCrit… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.8 |
| tRPOperPSFromCriteriaPrefixList4 The name of the fourth prefix list to match on. Set to empty string to
disable.
This object is the same as tRPOperPSFromCritPrefixList4, please use
tRPOperPSFromCri… | column | TPrefixListName | .1.3.6.1.4.1.6527.3.1.2.17.1.1.20.1.9 |