tmnxPppoePlcySessionTimeout
TIMETRA-PPPOE-MIB ·
.1.3.6.1.4.1.6527.3.1.2.49.1.2.1.31
Object
column
r/w
seconds Unsigned32
The value of tmnxPppoePlcySessionTimeout specifies the session timeout period to be used for this PPPOE session. The value '0' has the meaning of 'unlimited'
Context
- MIB
- TIMETRA-PPPOE-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.49.1.2.1.31- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tmnxPppoePlcyEntry
- Table
- tmnxPppoePlcyTable
- Siblings
- 28
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-31104000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPppoePlcyName The value of tmnxPppoePlcyName specifies the name of the PPP(oE)
policy. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.1 |
| tmnxPppoePlcyMaxSessionsPerMac The value tmnxPppoePlcyMaxSessionsPerMac specifies the maximum number
of PPPoE sessions that can be created per MAC address. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.10 |
| tmnxPppoePlcyReplyOnPadt The value tmnxPppoePlcyReplyOnPadt specifies whether the system
replies with a PADT (PPPoE Active Discovery Terminate) packet when a
PADT packet is received for an existing PPPoE … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.11 |
| tmnxPppoePlcyPppAuthentication The value tmnxPppoePlcyPppAuthentication specifies what PPP
authentication protocol(s) will be negotiated during the LCP phase.
This field is only applicable if PAP/CHAP authentic… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.12 |
| tmnxPppoePlcyPppMinChapChallenge The value of tmnxPppoePlcyPppMinChapChallenge specifies the minimum
length of the CHAP challenge generated by the system. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.13 |
| tmnxPppoePlcyPppMaxChapChallenge The value of tmnxPppoePlcyPppMaxChapChallenge specifies the maximum
length of the CHAP challenge generated by the system. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.14 |
| tmnxPppoePlcyPppInitialDelay The value of tmnxPppoePlcyPppInitialDelay specifies the delay before
starting the PPP stack of a PPPoE session. | column | centiseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.15 |
| tmnxPppoePlcyRowStatus The value of tmnxPppoePlcyRowStatus controls the creation and deletion
of rows in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.2 |
| tmnxPppoePlcyPppIpcpSubnetNeg The value tmnxPppoePlcyPppIpcpSubnetNeg specifies if IPCP subnet
negotiation is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.20 |
| tmnxPppoePlcyPadoAcName The value tmnxPppoePlcyPadoAcName specifies the AC-name (Access
Concentrator's name) tag which will be included in the PADO (PPPoE
Active Discovery Offer).
If the e… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.21 |
| tmnxPppoePlcyPppMtuForceGt1492 The value tmnxPppoePlcyPppMtuForceGt1492 specifies for PPPoE sessions
whether a PPP MTU greater than 1492 can be negotiated without
following the procedure described in RFC 4638. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.22 |
| tmnxPppoePlcyUniqueSessIdsPerSap The value tmnxPppoePlcyUniqueSessIdsPerSap specifies whether each
PPPoE session on the same SAP gets a unique session-id.
The value 'disabled' specifies that sessio… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.23 |
| tmnxPppoePlcyRejectDisabledNcp The value tmnxPppoePlcyRejectDisabledNcp specifies whether disabled
NCP's (Network Control Protocol) are rejected or silently ignored.
When the value of this object… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.24 |
| tmnxPppoePlcyLastMgmtChange The value of tmnxPppoePlcyLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this table
row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.3 |
| tmnxPppoePlcyLcpIgnoreMagic The value of tmnxPppoePlcyLcpIgnoreMagic specifies if checking the
Magic-Number field in LCP Echo-Request and Echo-Reply messages is
skipped.
If the value of tmnxPp… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.30 |
| tmnxPppoePlcyAllowSameCidForDhcp The value of tmnxPppoePlcyAllowSameCidForDhcp specifies whether it is
allowed to have multiple PPPoE sessions with the same MAC address and
circuit-id for a specific SAP when usin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.32 |
| tmnxPppoePlcyReestablishSession The value of tmnxPppoePlcyReestablishSession specifies whether the
setup of a new PPPoE session triggers the termination of an already
existing session with the same MAC address.
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.33 |
| tmnxPppoePlcyDefaultUserName The value of tmnxPppoePlcyDefaultUserName specifies the default PPP
username.
A non-empty value of this object is used when the PPP client (the
'peer') does not pro… | column | TIMETRA-TC-MIBTmnxPppoeUserNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.34 |
| tmnxPppoePlcyDefaultPapPassword The value of tmnxPppoePlcyDefaultPapPassword specifies the default PPP
password.
A non-empty value of this object is used when the PPP client (the
'peer') does not … | column | TIMETRA-TC-MIBTmnxAuthPassword | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.35 |
| tmnxPppoePlcySidAllocation The value tmnxPppoePlcySidAllocation specifies whether the session id
will be assigned sequentially or randomly | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.36 |
| tmnxPppoePlcyMaxSessionsPerCid The value tmnxPppoePlcyMaxSessionsPerCid specifies the maximum number
of PPPoE sessions that can be created per CID. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.37 |
| tmnxPppoePlcyAllowSessionsWoCid The value of tmnxPppoePlcyAllowSessionsWoCid specifies whether it is
allowed to have PPPoE sessions without a CID.
When set to 'true', the PPPoE session...
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.38 |
| tmnxPppoePlcyDescription The value of tmnxPppoePlcyDescription specifies the user provided
description of this PPP policy. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.4 |
| tmnxPppoePlcyPppMtu The value of tmnxPppoePlcyPppMtu specifies the largest IP packet that
can be sent out without being fragmented over the specific PPPoE
tunnel.
A value of 0 indicate… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.5 |
| tmnxPppoePlcyLcpKaInterval The value tmnxPppoePlcyLcpKaInterval specifies the time interval in
seconds at which LCP echo requests are transmitted. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.6 |
| tmnxPppoePlcyLcpKaHoldUpMplier The value of tmnxPppoePlcyLcpKaHoldUpMplier specifies how many LCP
keepalive messages can be missed before the related PPP session is
brought down. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.7 |
| tmnxPppoePlcyDisableAcCookies The value tmnxPppoePlcyDisableAcCookies specifies whether the use of
AC-Cookie tags during the PPPoE discovery phase is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.8 |
| tmnxPppoePlcyPadoDelay The value tmnxPppoePlcyPadoDelay specifies the delay timeout before
sending a PADO (PPPoE Active Discovery Offer). | column | deciseconds TIMETRA-TC-MIBTmnxPppoePadoDelay | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.9 |