tmnxPppoePlcyReestablishSession
TIMETRA-PPPOE-MIB ·
.1.3.6.1.4.1.6527.3.1.2.49.1.2.1.33
Object
column
r/w
Enumeration
The value of tmnxPppoePlcyReestablishSession specifies whether the
setup of a new PPPoE session triggers the termination of an already
existing session with the same MAC address.
The value of tmnxPppoePlcyReestablishSession can only be set different
from 'disabled' if the value of tmnxPppoePlcyMaxSessionsPerMac is
equal to one.
When set to 'disabled', no session will be deleted. When set to
'padr', the existing session will be deleted upon reception of the
PADR.
Context
- MIB
- TIMETRA-PPPOE-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.49.1.2.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxPppoePlcyEntry
- Table
- tmnxPppoePlcyTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | padr |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPppoePlcyName The value of tmnxPppoePlcyName specifies the name of the PPP(oE)
policy. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.1 |
| tmnxPppoePlcyMaxSessionsPerMac The value tmnxPppoePlcyMaxSessionsPerMac specifies the maximum number
of PPPoE sessions that can be created per MAC address. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.10 |
| tmnxPppoePlcyReplyOnPadt The value tmnxPppoePlcyReplyOnPadt specifies whether the system
replies with a PADT (PPPoE Active Discovery Terminate) packet when a
PADT packet is received for an existing PPPoE … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.11 |
| tmnxPppoePlcyPppAuthentication The value tmnxPppoePlcyPppAuthentication specifies what PPP
authentication protocol(s) will be negotiated during the LCP phase.
This field is only applicable if PAP/CHAP authentic… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.12 |
| tmnxPppoePlcyPppMinChapChallenge The value of tmnxPppoePlcyPppMinChapChallenge specifies the minimum
length of the CHAP challenge generated by the system. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.13 |
| tmnxPppoePlcyPppMaxChapChallenge The value of tmnxPppoePlcyPppMaxChapChallenge specifies the maximum
length of the CHAP challenge generated by the system. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.14 |
| tmnxPppoePlcyPppInitialDelay The value of tmnxPppoePlcyPppInitialDelay specifies the delay before
starting the PPP stack of a PPPoE session. | column | centiseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.15 |
| tmnxPppoePlcyRowStatus The value of tmnxPppoePlcyRowStatus controls the creation and deletion
of rows in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.2 |
| tmnxPppoePlcyPppIpcpSubnetNeg The value tmnxPppoePlcyPppIpcpSubnetNeg specifies if IPCP subnet
negotiation is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.20 |
| tmnxPppoePlcyPadoAcName The value tmnxPppoePlcyPadoAcName specifies the AC-name (Access
Concentrator's name) tag which will be included in the PADO (PPPoE
Active Discovery Offer).
If the e… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.21 |
| tmnxPppoePlcyPppMtuForceGt1492 The value tmnxPppoePlcyPppMtuForceGt1492 specifies for PPPoE sessions
whether a PPP MTU greater than 1492 can be negotiated without
following the procedure described in RFC 4638. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.22 |
| tmnxPppoePlcyUniqueSessIdsPerSap The value tmnxPppoePlcyUniqueSessIdsPerSap specifies whether each
PPPoE session on the same SAP gets a unique session-id.
The value 'disabled' specifies that sessio… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.23 |
| tmnxPppoePlcyRejectDisabledNcp The value tmnxPppoePlcyRejectDisabledNcp specifies whether disabled
NCP's (Network Control Protocol) are rejected or silently ignored.
When the value of this object… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.24 |
| tmnxPppoePlcyLastMgmtChange The value of tmnxPppoePlcyLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this table
row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.3 |
| tmnxPppoePlcyLcpIgnoreMagic The value of tmnxPppoePlcyLcpIgnoreMagic specifies if checking the
Magic-Number field in LCP Echo-Request and Echo-Reply messages is
skipped.
If the value of tmnxPp… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.30 |
| tmnxPppoePlcySessionTimeout The value of tmnxPppoePlcySessionTimeout specifies the session timeout
period to be used for this PPPOE session. The value '0' has the
meaning of 'unlimited' | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.31 |
| tmnxPppoePlcyAllowSameCidForDhcp The value of tmnxPppoePlcyAllowSameCidForDhcp specifies whether it is
allowed to have multiple PPPoE sessions with the same MAC address and
circuit-id for a specific SAP when usin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.32 |
| tmnxPppoePlcyDefaultUserName The value of tmnxPppoePlcyDefaultUserName specifies the default PPP
username.
A non-empty value of this object is used when the PPP client (the
'peer') does not pro… | column | TIMETRA-TC-MIBTmnxPppoeUserNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.34 |
| tmnxPppoePlcyDefaultPapPassword The value of tmnxPppoePlcyDefaultPapPassword specifies the default PPP
password.
A non-empty value of this object is used when the PPP client (the
'peer') does not … | column | TIMETRA-TC-MIBTmnxAuthPassword | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.35 |
| tmnxPppoePlcySidAllocation The value tmnxPppoePlcySidAllocation specifies whether the session id
will be assigned sequentially or randomly | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.36 |
| tmnxPppoePlcyMaxSessionsPerCid The value tmnxPppoePlcyMaxSessionsPerCid specifies the maximum number
of PPPoE sessions that can be created per CID. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.37 |
| tmnxPppoePlcyAllowSessionsWoCid The value of tmnxPppoePlcyAllowSessionsWoCid specifies whether it is
allowed to have PPPoE sessions without a CID.
When set to 'true', the PPPoE session...
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.38 |
| tmnxPppoePlcyDescription The value of tmnxPppoePlcyDescription specifies the user provided
description of this PPP policy. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.4 |
| tmnxPppoePlcyPppMtu The value of tmnxPppoePlcyPppMtu specifies the largest IP packet that
can be sent out without being fragmented over the specific PPPoE
tunnel.
A value of 0 indicate… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.5 |
| tmnxPppoePlcyLcpKaInterval The value tmnxPppoePlcyLcpKaInterval specifies the time interval in
seconds at which LCP echo requests are transmitted. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.6 |
| tmnxPppoePlcyLcpKaHoldUpMplier The value of tmnxPppoePlcyLcpKaHoldUpMplier specifies how many LCP
keepalive messages can be missed before the related PPP session is
brought down. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.7 |
| tmnxPppoePlcyDisableAcCookies The value tmnxPppoePlcyDisableAcCookies specifies whether the use of
AC-Cookie tags during the PPPoE discovery phase is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.8 |
| tmnxPppoePlcyPadoDelay The value tmnxPppoePlcyPadoDelay specifies the delay timeout before
sending a PADO (PPPoE Active Discovery Offer). | column | deciseconds TIMETRA-TC-MIBTmnxPppoePadoDelay | .1.3.6.1.4.1.6527.3.1.2.49.1.2.1.9 |