tmnxPcepPccReqMsgStrictLoose
TIMETRA-PCEP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.28
Object
column
SNMPv2-TCTruthValue
The value of tmnxPcepPccReqMsgStrictLoose indicates whether the path
is strict or loose. It is the RP object used in PCReq message.
When the value of this object is set to 'true (1)', it indicates that
a loose path is acceptable.
When the value of this object is set to 'false (2)', it indicates that
a path exclusively made of strict hops is required.
Context
- MIB
- TIMETRA-PCEP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.28- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxPcepPccReqMsgInfoEntry
- Table
- tmnxPcepPccReqMsgInfoTable
- Siblings
- 29
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPcepPccReqMsgRequestId The value of tmnxPcepPccReqMsgRequestId specifies the unique path
computation request identifier represented in PCReq message. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.1 |
| tmnxPcepPccReqMsgDstAddrType The value tmnxPcepPccReqMsgDstAddrType indicates the address type for
tmnxPcepPccReqMsgDstAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.10 |
| tmnxPcepPccReqMsgDstAddr The value of tmnxPcepPccReqMsgDstAddr indicates the destination
address of the path for which path computation is requested. It is the
END-POINTS object used in PCReq message. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.11 |
| tmnxPcepPccReqMsgState The value of tmnxPcepPccReqMsgState indicates the state of PCReq
message:
unknown (0) - The state of PCReq message is unknown.
requestParameter(1) - Request Parame… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.12 |
| tmnxPcepPccReqMsgSvecId The value of tmnxPcepPccReqMsgSvecId indicates the Synchronization
VECtor (SVEC) identifier for Synchronized Dependent Path Computations. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.13 |
| tmnxPcepPccReqMsgIgpMetric The value of tmnxPcepPccReqMsgIgpMetric indicates Interior Gateway
Protocol (IGP) metric that must be optimized by the path computation
algorithm for providing the cost of compute… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.14 |
| tmnxPcepPccReqMsgTeMetric The value of tmnxPcepPccReqMsgTeMetric indicates Traffic Engineering
(TE) metric that must be optimized by the path computation algorithm
for providing the cost of computed path. … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.15 |
| tmnxPcepPccReqMsgHopCount The value of tmnxPcepPccReqMsgHopCount indicates the number of hops
that transversed. It is the METRIC object used in PCReq message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.16 |
| tmnxPcepPccReqMsgMetricBound The value of tmnxPcepPccReqMsgMetricBound indicates whether the
metric-value specifies a bound (a maximum) for the path metric that
must not be exceeded for the PCC to consider th… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.17 |
| tmnxPcepPccReqMsgMetricCompute The value of tmnxPcepPccReqMsgMetricCompute indicates whether PCE must
provide the computed path metric value in Path Computation Response
(PCRep) message for the corresponding me… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.18 |
| tmnxPcepPccReqMsgLclProtDesired The value of tmnxPcepPccReqMsgLclProtDesired indicates whether local
protection is desired or not. It is the LSPA (LSP Attribute) object
used in PCReq message.
When… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.19 |
| tmnxPcepPccReqMsgLspType The value of tmnxPcepPccReqMsgLspType indicates the type of Labeled
Switch Path (LSP) connection. | column | TmnxPcepLspType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.2 |
| tmnxPcepPccReqMsgSetupPriority The value of tmnxPcepPccReqMsgSetupPriority indicates the priority of
the TE LSP with respect to taking resources. The value of 0 represents
highest priority. The setup priority i… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.20 |
| tmnxPcepPccReqMsgHoldingPriority The value of tmnxPcepPccReqMsgHoldingPriority indicates the priority
of of the TE LSP with respect to holding resources. The value of 0
represents highest priority. The holding pr… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.21 |
| tmnxPcepPccReqMsgExcludeAny The value of tmnxPcepPccReqMsgExcludeAny indicates a set of attribute
filters associated with a tunnel any of which renders a link
unacceptable. It is the LSPA object used in PCRe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.22 |
| tmnxPcepPccReqMsgIncludeAny The value of tmnxPcepPccReqMsgIncludeAny indicates a set of attribute
filters associated with a tunnel any of which renders a link
acceptable. It is the LSPA object used in PCReq … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.23 |
| tmnxPcepPccReqMsgIncludeAll The value of tmnxPcepPccReqMsgIncludeAll indicates a set of attribute
filters associated with a tunnel all of which much be present for a
link to be acceptable. It is the LSPA obj… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.24 |
| tmnxPcepPccReqMsgPriority The value of tmnxPcepPccReqMsgPriority indicates the priority of the
PCReq message. It is the RP object used in PCReq message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.25 |
| tmnxPcepPccReqMsgReoptimization The value of tmnxPcepPccReqMsgReoptimization indicates whether the
PCReq message relates to the reoptimization of an existing TE LSP. It
is the RP object used in PCReq message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.26 |
| tmnxPcepPccReqMsgBidirectional The value of tmnxPcepPccReqMsgBidirectional indicates whether the
PCReq message relates to a bi-directional TE LSP that has the same
traffic engineering requirements including fat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.27 |
| tmnxPcepPccReqMsgLspBandwidth The value of tmnxPcepPccReqMsgLspBandwidth indicates the bandwidth
that is being requested by the LSP. | column | Mbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.29 |
| tmnxPcepPccReqMsgTunnelId The value of tmnxPcepPccReqMsgTunnelId indicates the unique tunnel
identifier that remains constant over the life time of a tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.3 |
| tmnxPcepPccReqMsgMaxSrLabels The value of tmnxPcepPccReqMsgMaxSrLabels indicates maximum segment
routing label stack size for this LSP. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.30 |
| tmnxPcepPccReqMsgLspId The value of tmnxPcepPccReqMsgLspId indicates the unique identifier
for LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.4 |
| tmnxPcepPccReqMsgExtTunnelIdType The value tmnxPcepPccReqMsgExtTunnelIdType indicates the address type
for tmnxPcepPccReqMsgExtTunnelId. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.5 |
| tmnxPcepPccReqMsgExtTunnelId The value of tmnxPcepPccReqMsgExtTunnelId indicates the extended
tunnel identifier. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.6 |
| tmnxPcepPccReqMsgLspName The value of tmnxPcepPccReqMsgLspName indicates the LSP path name that
is unique in the PCC and remains constant throughout a path's life
time. | column | TIMETRA-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.7 |
| tmnxPcepPccReqMsgSrcAddrType The value tmnxPcepPccReqMsgSrcAddrType indicates the address type for
tmnxPcepPccReqMsgSrcAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.8 |
| tmnxPcepPccReqMsgSrcAddr The value of tmnxPcepPccReqMsgSrcAddr indicates the source address of
the path for which path computation is requested. It is the END-POINTS
object used in PCReq message. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.9 |