tmnxPcepPccReqMsgState
TIMETRA-PCEP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.12
Object
column
Enumeration
The value of tmnxPcepPccReqMsgState indicates the state of PCReq
message:
unknown (0) - The state of PCReq message is unknown.
requestParameter(1) - Request Parameter (RP) object is included in
the PCReq message.
sentForCompute (2) - PCReq message has been sent for path
computation.
errorReceived (3) - Path Computation Error (PCErr) message is
received by the PCC.
notifyReceived (4) - Path Computation Notification (PCNtf)
message is received by the PCC.
cancel (5) - PCReq message has been cancelled.
computeReceived (6) - Path computation is received by the PCC.
Context
- MIB
- TIMETRA-PCEP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxPcepPccReqMsgInfoEntry
- Table
- tmnxPcepPccReqMsgInfoTable
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | requestParameter |
2 | sentForCompute |
3 | errorReceived |
4 | notifyReceived |
5 | cancel |
6 | computeReceived |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPcepPccReqMsgRequestId The value of tmnxPcepPccReqMsgRequestId specifies the unique path
computation request identifier represented in PCReq message. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.1 |
| tmnxPcepPccReqMsgDstAddrType The value tmnxPcepPccReqMsgDstAddrType indicates the address type for
tmnxPcepPccReqMsgDstAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.10 |
| tmnxPcepPccReqMsgDstAddr The value of tmnxPcepPccReqMsgDstAddr indicates the destination
address of the path for which path computation is requested. It is the
END-POINTS object used in PCReq message. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.11 |
| tmnxPcepPccReqMsgSvecId The value of tmnxPcepPccReqMsgSvecId indicates the Synchronization
VECtor (SVEC) identifier for Synchronized Dependent Path Computations. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.13 |
| tmnxPcepPccReqMsgIgpMetric The value of tmnxPcepPccReqMsgIgpMetric indicates Interior Gateway
Protocol (IGP) metric that must be optimized by the path computation
algorithm for providing the cost of compute… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.14 |
| tmnxPcepPccReqMsgTeMetric The value of tmnxPcepPccReqMsgTeMetric indicates Traffic Engineering
(TE) metric that must be optimized by the path computation algorithm
for providing the cost of computed path. … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.15 |
| tmnxPcepPccReqMsgHopCount The value of tmnxPcepPccReqMsgHopCount indicates the number of hops
that transversed. It is the METRIC object used in PCReq message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.16 |
| tmnxPcepPccReqMsgMetricBound The value of tmnxPcepPccReqMsgMetricBound indicates whether the
metric-value specifies a bound (a maximum) for the path metric that
must not be exceeded for the PCC to consider th… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.17 |
| tmnxPcepPccReqMsgMetricCompute The value of tmnxPcepPccReqMsgMetricCompute indicates whether PCE must
provide the computed path metric value in Path Computation Response
(PCRep) message for the corresponding me… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.18 |
| tmnxPcepPccReqMsgLclProtDesired The value of tmnxPcepPccReqMsgLclProtDesired indicates whether local
protection is desired or not. It is the LSPA (LSP Attribute) object
used in PCReq message.
When… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.19 |
| tmnxPcepPccReqMsgLspType The value of tmnxPcepPccReqMsgLspType indicates the type of Labeled
Switch Path (LSP) connection. | column | TmnxPcepLspType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.2 |
| tmnxPcepPccReqMsgSetupPriority The value of tmnxPcepPccReqMsgSetupPriority indicates the priority of
the TE LSP with respect to taking resources. The value of 0 represents
highest priority. The setup priority i… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.20 |
| tmnxPcepPccReqMsgHoldingPriority The value of tmnxPcepPccReqMsgHoldingPriority indicates the priority
of of the TE LSP with respect to holding resources. The value of 0
represents highest priority. The holding pr… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.21 |
| tmnxPcepPccReqMsgExcludeAny The value of tmnxPcepPccReqMsgExcludeAny indicates a set of attribute
filters associated with a tunnel any of which renders a link
unacceptable. It is the LSPA object used in PCRe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.22 |
| tmnxPcepPccReqMsgIncludeAny The value of tmnxPcepPccReqMsgIncludeAny indicates a set of attribute
filters associated with a tunnel any of which renders a link
acceptable. It is the LSPA object used in PCReq … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.23 |
| tmnxPcepPccReqMsgIncludeAll The value of tmnxPcepPccReqMsgIncludeAll indicates a set of attribute
filters associated with a tunnel all of which much be present for a
link to be acceptable. It is the LSPA obj… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.24 |
| tmnxPcepPccReqMsgPriority The value of tmnxPcepPccReqMsgPriority indicates the priority of the
PCReq message. It is the RP object used in PCReq message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.25 |
| tmnxPcepPccReqMsgReoptimization The value of tmnxPcepPccReqMsgReoptimization indicates whether the
PCReq message relates to the reoptimization of an existing TE LSP. It
is the RP object used in PCReq message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.26 |
| tmnxPcepPccReqMsgBidirectional The value of tmnxPcepPccReqMsgBidirectional indicates whether the
PCReq message relates to a bi-directional TE LSP that has the same
traffic engineering requirements including fat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.27 |
| tmnxPcepPccReqMsgStrictLoose The value of tmnxPcepPccReqMsgStrictLoose indicates whether the path
is strict or loose. It is the RP object used in PCReq message.
When the value of this object is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.28 |
| tmnxPcepPccReqMsgLspBandwidth The value of tmnxPcepPccReqMsgLspBandwidth indicates the bandwidth
that is being requested by the LSP. | column | Mbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.29 |
| tmnxPcepPccReqMsgTunnelId The value of tmnxPcepPccReqMsgTunnelId indicates the unique tunnel
identifier that remains constant over the life time of a tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.3 |
| tmnxPcepPccReqMsgMaxSrLabels The value of tmnxPcepPccReqMsgMaxSrLabels indicates maximum segment
routing label stack size for this LSP. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.30 |
| tmnxPcepPccReqMsgLspId The value of tmnxPcepPccReqMsgLspId indicates the unique identifier
for LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.4 |
| tmnxPcepPccReqMsgExtTunnelIdType The value tmnxPcepPccReqMsgExtTunnelIdType indicates the address type
for tmnxPcepPccReqMsgExtTunnelId. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.5 |
| tmnxPcepPccReqMsgExtTunnelId The value of tmnxPcepPccReqMsgExtTunnelId indicates the extended
tunnel identifier. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.6 |
| tmnxPcepPccReqMsgLspName The value of tmnxPcepPccReqMsgLspName indicates the LSP path name that
is unique in the PCC and remains constant throughout a path's life
time. | column | TIMETRA-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.7 |
| tmnxPcepPccReqMsgSrcAddrType The value tmnxPcepPccReqMsgSrcAddrType indicates the address type for
tmnxPcepPccReqMsgSrcAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.8 |
| tmnxPcepPccReqMsgSrcAddr The value of tmnxPcepPccReqMsgSrcAddr indicates the source address of
the path for which path computation is requested. It is the END-POINTS
object used in PCReq message. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.101.3.1.1.1.9 |