tmnxOspfIgnoreDNBit
TIMETRA-OSPF-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.36.2.1.44
Object
The value of tmnxOspfIgnoreDNBit specifies whether to ignore the DN
bit for OSPF LSA packets for this instance of OSPF on the router.
When tmnxOspfIgnoreDNBit has a value of 'true' the DN bit for OSPF LSA
packets will be ignored. When it has a value of 'false' the DN bit
will not be ignored for OSPF LSA packets.
Context
- MIB
- TIMETRA-OSPF-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.36.2.1.44- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxOspfGeneralEntry
- Table
- tmnxOspfGeneralTable
- Siblings
- 63
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOspfVersion The value of tmnxOspfVersion specifies the version number of OSPF
supported by this OSPF instance. The version number of OSPF for
IPv6 is 3. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.2.1.1 |
| tmnxOspfMulticastExtensions The value of tmnxOspfMulticastExtensions specifies a Bit Mask
indicating whether the router is forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multicast… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.36.2.1.10 |
| tmnxOspfExitOverflowInterval The value of tmnxOspfExitOverflowInterval specifies the number of
seconds that, after entering Overflow State, a router will attempt
to leave Overflow State. This allows the route… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.11 |
| tmnxOspfDemandExtensions The value of tmnxOspfDemandExtensions specifies the router's support
for demand routing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.12 |
| tmnxOspfReferenceBandwidth The value of tmnxOspfReferenceBandwidth specifies default
metrics to any OSPF interface. The cost metric is calculated
by dividing the value of tmnxOspfReferenceBandwidth by the … | column | 1000 bits per second Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.13 |
| tmnxOspfStrictLsaChecking The value of tmnxOspfStrictLsaChecking specifies whether or not to
perform strict LSA checking during OSPF graceful restart. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.14 |
| tmnxOspfRestartSupport The value of tmnxOspfRestartSupport specifies the router's support
for OSPF graceful restart. Options include: no restart support,
only planned restarts or both planned and unpla… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.2.1.15 |
| tmnxOspfRestartInterval The value of tmnxOspfRestartInterval specifies the configured OSPF
graceful restart timeout interval. | column | seconds TmnxOspfUpToRefreshIntervalTc | .1.3.6.1.4.1.6527.3.1.2.36.2.1.16 |
| tmnxOspfPreference The value of tmnxOspfPreference specifies the route preference for
OSPF internal routes. | column | TmnxOspfPreference | .1.3.6.1.4.1.6527.3.1.2.36.2.1.17 |
| tmnxOspfExternalPreference The value of tmnxOspfExternalPreference specifies the route preference
for OSPF external routes. | column | TmnxOspfPreference | .1.3.6.1.4.1.6527.3.1.2.36.2.1.18 |
| tmnxOspfExportPolicy1 The value of tmnxOspfExportPolicy1 specifies the name of the 1st
Export policy to be used for determining which routes are exported
from the routing table to OSPF. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.19 |
| tmnxOspfInstance The value of tmnxOspfInstance is a unique integer that identifies a
specific instance of a version of the OSPF protocol running in the
router instance specified by the vRtrID inde… | column | TIMETRA-TC-MIBTmnxOspfInstance | .1.3.6.1.4.1.6527.3.1.2.36.2.1.2 |
| tmnxOspfExportPolicy2 The value of tmnxOspfExportPolicy2 specifies the name of the 2nd
Export policy to be used for determining which routes are exported
from the routing table to OSPF. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.20 |
| tmnxOspfExportPolicy3 The value of tmnxOspfExportPolicy3 specifies the name of the 3rd
Export policy to be used for determining which routes are exported
from the routing table to OSPF. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.21 |
| tmnxOspfExportPolicy4 The value of tmnxOspfExportPolicy4 specifies the name of the 4rd
Export policy to be used for determining which routes are exported
from the routing table to OSPF. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.22 |
| tmnxOspfExportPolicy5 The value of tmnxOspfExportPolicy5 specifies the name of the 5th
Export policy to be used for determining which routes are exported
from the routing table to OSPF. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.23 |
| tmnxOspfManualSpfTrigger The value of tmnxOspfManualSpfTrigger specifies a manual Dijkstra SPF
calculation trigger.
When tmnxOspfManualSpfTrigger is set to 'runTotalSpf' a normal
Dijkstra S… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.2.1.24 |
| tmnxOspfOverloadAdmState The value of tmnxOspfOverloadAdmState specifies a command used to
manually make the system go in or out of overload state. Whenever this
value is set, tmnxOspfOverloadInterval is … | column | OSPF-MIBStatus | .1.3.6.1.4.1.6527.3.1.2.36.2.1.25 |
| tmnxOspfOverloadInterval The value of tmnxOspfOverloadInterval specifies how long (in seconds)
OSPF should remain in overload state. This is reset to default when
tmnxOspfOverloadAdmState is modified. The… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.26 |
| tmnxOspfBootOverloadAdmState The value of tmnxOspfBootOverloadAdmState specifies the desired
overload state that should be applied after boot Whenever this value
is set, tmnxOspfBootOverloadInterval is reset … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.2.1.27 |
| tmnxOspfBootOverloadInterval The value of tmnxOspfBootOverloadInterval specifies the configured
value for OSPF for which it should remain in overload state on
boot-up. This is reset to default when tmnxOspfBo… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.28 |
| tmnxOspfOverloadStubs The value of tmnxOspfOverloadStubs specifies if the OSPF stub networks
should be advertised with a maximum metric value when the system goes
into overload state for any reason. If… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.29 |
| tmnxOspfSpfMaxWait The value of tmnxOspfSpfMaxWait defines the maximum interval between
two consecutive full SPF calculations. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.30 |
| tmnxOspfSpfInitialWait The value of tmnxOspfSpfInitialWait defines the hold down time before
a full SPF calculation delay after a topology change. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.31 |
| tmnxOspfSpfSecondWait The value of tmnxOspfSpfSecondWait defines the hold time between the
first and second SPF calculation. Subsequent SPF runs will occur at
exponentially increasing intervals of the … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.32 |
| tmnxOspfLsaGenMaxWait The value of tmnxOspfLsaGenMaxWait defines the maximum interval
between two consecutive updates of a self generated LSA due to any
event. This is a way to manipulate the 'MinLSInt… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.33 |
| tmnxOspfLsaGenInitialWait The value of tmnxOspfLsaGenInitialWait defines the initial LSA
generation delay after an event that causes the LSA generation or
update. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.34 |
| tmnxOspfLsaGenSecondWait The value of tmnxOspfLsaGenSecondWait defines the hold time between
the first and second LSA generation.
Subsequent updates of that LSA will occur at exponentially … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.35 |
| tmnxOspfLsaArrivalWait The value of tmnxOspfLsaArrivalWait defines the minimum interval
between two consecutive updates of an LSA received from any neighbor.
Any LSA update received before that is disca… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.36 |
| tmnxOspfTESupport The value of tmnxOspfTESupport specifies whether or not TEs
are supported by this instance of OSPF. When it has a value
of 'true', TEs are supported. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.37 |
| tmnxOspfUnicastImport The value of tmnxOspfUnicastImport specifies whether OSPF protocol
will submit routes into the unicast Route Table Manage(RTM).
When tmnxOspfUnicastImport has a val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.38 |
| tmnxOspfMulticastImport The value of tmnxOspfMulticastImport specifies whether OSPF protocol
will submit routes into the multicast Reverse Path Forwarding(RPF)
Route Table Manage(RTM).
Whe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.39 |
| tmnxOspfGeneralLastChanged The value of tmnxOspfGeneralLastChanged indicates the sysUpTime when a
configurable object in this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.36.2.1.4 |
| tmnxOspfGREnable The value of tmnxOspfGREnable specifies whether the graceful restart
is enabled or disabled for this instance of OSPF on the router.
When tmnxOspfGREnable has a val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.40 |
| tmnxOspfGRHelperMode The value of tmnxOspfGRHelperMode specifies whether the graceful
restart helper mode is enabled or disabled for this instance of OSPF
on the router. tmnxOspfGRHelperMode is valid … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.41 |
| tmnxOspfRowStatus The tmnxOspfRowStatus variable is used for creation and deletion of
tmnxOspfGeneralTable row entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.36.2.1.42 |
| tmnxOspfAsbrDomainId The value of tmnxOspfAsbrDomainId specifies the domain-id associated
with this instance of OSPF on the router.
If no value is specified for tmnxOspfAsbrDomainId, it… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.43 |
| tmnxOspfSuppressDNBit The value of tmnxOspfSuppressDNBit specifies whether to suppress the
setting of the DN bit for OSPF LSA packets generated by this instance
of OSPF on the router.
Wh… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.45 |
| tmnxOspfLdpSyncAdminState The value of tmnxOspfLdpSyncAdminState specifies whether the IGP-LDP
synchronization feature is enabled or disabled on all interfaces
participating in the OSPF routing protocol.
… | column | OSPF-MIBStatus | .1.3.6.1.4.1.6527.3.1.2.36.2.1.46 |
| tmnxOspfVpnDomainType The value of tmnxOspfVpnDomainType specifies type of the extended
community attribute exchanged using BGP to carry the OSPF VPN Domain
ID. This object applies to VPRN instances of… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.36.2.1.47 |
| tmnxOspfVpnDomainId The value of tmnxOspfVpnDomainId specifies the OSPF VPN Domain. This
is exchanged using BGP in the extended community attribute associated
with a prefix. This object applies to VP… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.36.2.1.48 |
| tmnxOspfVpnTag The value of tmnxOspfVpnTag specifies the route tag for an OSPF VPN on
a PE router. This field is set in the tag field of the OSPF external
LSAs generated by the PE. This is mainl… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.49 |
| tmnxOspfRouterId The value of tmnxOspfRouterId specifies a 32-bit integer uniquely
identifying the router in the Autonomous System. By convention
to ensure uniqueness, this may default to the val… | column | TmnxOspfRouterIdTc | .1.3.6.1.4.1.6527.3.1.2.36.2.1.5 |
| tmnxOspfSuperBackBone The value of tmnxOspfSuperBackBone specifies whether CE-PE
functionality is required or not. tmnxOspfSuperBackBone indicates the
type of the LSA generated as a result of routes re… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.50 |
| tmnxOspfLdpOverRsvp The value of tmnxOspfLdpOverRsvp specifies whether LDP-over-RSVP
feature is enabled or disabled for a specific OSPF instance.
When tmnxOspfLdpOverRsvp is enabled, O… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.36.2.1.51 |
| tmnxOspfExportLimit The value of tmnxOspfExportLimit specifies the maximum number of
routes or prefixes that can be exported into OSPF or OSPF3 from the
route table.
A value of 0 indic… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.52 |
| tmnxOspfExportLimitLogPercent The value of tmnxOspfExportLimitLogPercent specifies the percentage of
the export-limit, at which a warning log message and SNMP notification
would be sent. This would only be a w… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.53 |
| tmnxOspfRsvpShortcut obsolete The value of tmnxOspfRsvpShortcut specifies whether RSVP-TE shortcut
for resolving IGP routes has been enabled or disabled for OSPF.
When the value of tmnxOspfRsvpS… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.54 |
| tmnxOspfAdvertiseTunnelLink The value of tmnxOspfAdvertiseTunnelLink specifies whether
advertisement of LSP shortcuts into IGP has been enabled or disabled
for OSPF.
When the value of tmnxOspf… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.55 |
| tmnxOspfImportPolicy1 The value of tmnxOspfImportPolicy1 specifies the name of the 1st
import policy to be used for determining which routes are imported
from OSPF to the routing table. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.56 |
| tmnxOspfImportPolicy2 The value of tmnxOspfImportPolicy2 specifies the name of the 2nd
import policy to be used for determining which routes are imported
from OSPF to the routing table. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.57 |
| tmnxOspfImportPolicy3 The value of tmnxOspfImportPolicy3 specifies the name of the 3rd
import policy to be used for determining which routes are imported
from OSPF to the routing table. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.58 |
| tmnxOspfImportPolicy4 The value of tmnxOspfImportPolicy4 specifies the name of the 4rd
import policy to be used for determining which routes are imported
from OSPF to the routing table. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.59 |
| tmnxOspfAdminState The value of tmnxOspfAdminState specifies the desired administrative
status of this instance of OSPF in the router. The value 'enabled'
activates this instance of the OSPF protoco… | column | OSPF-MIBStatus | .1.3.6.1.4.1.6527.3.1.2.36.2.1.6 |
| tmnxOspfImportPolicy5 The value of tmnxOspfImportPolicy5 specifies the name of the 5thimport
policy to be used for determining which routes are imported from OSPF
to the routing table. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.36.2.1.60 |
| tmnxOspfLoopfreeAlternate The value of tmnxOspfLoopfreeAlternate specifies whether to enable or
disable IP fast reroute capability for OSPF.
When the value of tmnxOspfLoopfreeAlternate is se… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.61 |
| tmnxOspfLsaAccumulate The value of tmnxOspfLsaAccumulate defines the accumulation delay for
multiple LSAs, so OSPF messages can be sent as efficiently as
possible.
Shorting this delay ca… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.62 |
| tmnxOspfRedistDelay The value of tmnxOspfRedistDelay defines the internal OSPF hold down
timer for external routes being redistributed into OSPF.
Shorting this delay can speed up the a… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.63 |
| tmnxOspfIncrSpfWait The value of tmnxOspfIncrSpfWait defines the internal OSPF delay
before an incremental SPF calculation is performed. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.64 |
| tmnxOspfOverloadInclExt2 The value of tmnxOspfOverloadInclExt2 specifies if the OSPF external
prefixes with metric-type 2, should be advertised with a maximum
metric value when the system goes into overlo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.65 |
| tmnxOspfASBdrRtrStatus The value of tmnxOspfASBdrRtrStatus specifies whether this router is
configured as an Autonomous System border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.7 |
| tmnxOspfRFC1583Compatibility The value of tmnxOspfRFC1583Compatibility indicates the metrics used
to choose among multiple AS-external-LSAs. When
tmnxOspfRFC1583Compatibility is set to 'true', only cost will … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.36.2.1.8 |
| tmnxOspfExtLsdbLimit The value of tmnxOspfExtLsdbLimit specifies the maximum number of
non-default AS-external-LSAs entries that can be stored in the
link-state database. If the value is -1, then ther… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.36.2.1.9 |