tmnxOamPmThrClear
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.3.92.0.2
Object
notification
[CAUSE] A tmnxOamPmThrClear trap is sent at the end of an OAM-PM
measurement interval when a loss or delay counter meets or falls below
its configured clear threshold.
At most one tmnxOamPmThrClear trap is sent per tmnxOamPmThrRaise trap.
OAM-PM thresholds are explained in the DESCRIPTION clauses of
tmnxOamPmCfgThrDelayTable, tmnxOamPmCfgThrLossFwBwAgTable, and
tmnxOamPmCfgThrLossFwBwTable.
OAM-PM counters are explained in the DESCRIPTION clauses of the
tmnxOamPmStatsTableObjs tables.
[EFFECT] For an LMM test, the loss of live traffic has met or fallen
below a configured threshold. For other test types, the loss or delay
of OAM-PM test probes has met or fallen below a configured threshold,
indicating a possible improvement in the loss or delay of live traffic.
[RECOVERY] No recovery is required for this trap.
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.92.0.2- Type
- notification
- Status
- current
- Parent
- tmnxOamPmNotifications
- Siblings
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmThrRaise [CAUSE] A tmnxOamPmThrRaise trap is sent when an OAM-PM loss or delay
counter meets or exceeds its configured raise threshold.
If an Average Frame Loss Ratio (FLR) thre… | notification | - | .1.3.6.1.4.1.6527.3.1.3.92.0.1 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmStsBaseStartTime The value of tmnxOamPmStsBaseStartTime indicates the start time (in
UTC) of the specified measurement interval data set. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.6 |
| tmnxOamPmStsBaseSuspect The value of tmnxOamPmStsBaseSuspect indicates whether or not the
specified measurement interval data set contains suspect information. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.92.2.2.1.1.5 |
| tmnxOamPmNotifThrType The value of tmnxOamPmNotifThrType indicates the type of the OAM-PM
threshold crossing being reported.
The code points are as follows.
delay (1) - a threshol… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.1 |
| tmnxOamPmNotifThrDirection The value of tmnxOamPmNotifThrDirection indicates the traffic flow
direction of the OAM-PM threshold crossing being reported.
The semantics of the code points are docum… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.2 |
| tmnxOamPmNotifThrDelayBinType The value of tmnxOamPmNotifThrDelayBinType indicates the bin type of
the OAM-PM delay threshold crossing being reported.
'notApplicable(0)' is used for loss tests (i.e.… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.3 |
| tmnxOamPmNotifThrStateType The value of tmnxOamPmNotifThrStateType indicates whether or not the
OAM-PM threshold crossing being reported is stateful.
The code points are as follows.
stateful … | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.4 |
| tmnxOamPmNotifThrCfgClear The value of tmnxOamPmNotifThrCfgClear indicates the configured clear
threshold for the OAM-PM Clear trap being reported.
The value reported is one of the following (wh… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.6 |
| tmnxOamPmNotifThrOperClear The value of tmnxOamPmNotifThrOperClear indicates the value of the
delay or loss counter which met or fell below
tmnxOamPmNotifThrCfgClear, resulting in the OAM-PM Clear trap bein… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.8 |
| tmnxOamPmNotifThrBinLowerBound The value of tmnxOamPmNotifThrBinLowerBound indicates the configured
lower bound (in microseconds) of the MEF-35 delay bin which is the
subject of the enclosing notification.
… | scalar | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.9 |