tmnxOamPmNotifThrBinLowerBound
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.92.3.9
Object
The value of tmnxOamPmNotifThrBinLowerBound indicates the configured
lower bound (in microseconds) of the MEF-35 delay bin which is the
subject of the enclosing notification.
When this object is part of a tmnxOamPmThrRaise notification, the
notification was raised because the number of PDUs with delay greater
than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified
measurement interval) met or exceeded the configured threshold
tmnxOamPmCfgThrDelayRaise.
When this object is part of a tmnxOamPmThrClear notification, the
notification was raised because the number of PDUs with delay greater
than or equal to tmnxOamPmNotifThrBinLowerBound (in the specified
measurement interval) was less than or equal to the configured
threshold tmnxOamPmCfgThrDelayClear.
For example, suppose an OAM-PM delay raise threshold is configured with
tmnxOamPmCfgThrDelayRaise = 1000 and tmnxOamPmCfgThrDelayLowestBin = 6.
Suppose the configured lower bound (i.e. tmnxOamPmCfgBinLowerBound) for
the specified bin 6 is 30,000 microseconds. Then, if the count of PDUs
with delay at or above 30,000 microseconds (e.g.
tmnxOamPmStsDelayDmmBin2wyCount) is 1000, and a TCA is raised, this
object will report 30,000.
This value must be ignored if the enclosing notification is a loss TCA
(i.e. when tmnxOamPmNotifThrType is not 'delay(1)').
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.92.3.9- Type
- scalar
- Access
- notifyonly
- Status
- current
- Units
- microseconds
- Parent
- tmnxOamPmNotificationObjs
- Siblings
- 8
Syntax
microseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmNotifThrType The value of tmnxOamPmNotifThrType indicates the type of the OAM-PM
threshold crossing being reported.
The code points are as follows.
delay (1) - a threshol… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.1 |
| tmnxOamPmNotifThrDirection The value of tmnxOamPmNotifThrDirection indicates the traffic flow
direction of the OAM-PM threshold crossing being reported.
The semantics of the code points are docum… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.2 |
| tmnxOamPmNotifThrDelayBinType The value of tmnxOamPmNotifThrDelayBinType indicates the bin type of
the OAM-PM delay threshold crossing being reported.
'notApplicable(0)' is used for loss tests (i.e.… | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.3 |
| tmnxOamPmNotifThrStateType The value of tmnxOamPmNotifThrStateType indicates whether or not the
OAM-PM threshold crossing being reported is stateful.
The code points are as follows.
stateful … | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.92.3.4 |
| tmnxOamPmNotifThrCfgRaise The value of tmnxOamPmNotifThrCfgRaise indicates the configured raise
threshold for the OAM-PM Raise trap being reported.
The value reported is one of the following (wh… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.5 |
| tmnxOamPmNotifThrCfgClear The value of tmnxOamPmNotifThrCfgClear indicates the configured clear
threshold for the OAM-PM Clear trap being reported.
The value reported is one of the following (wh… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.6 |
| tmnxOamPmNotifThrOperRaise The value of tmnxOamPmNotifThrOperRaise indicates the value of the
delay or loss counter which met or exceeded tmnxOamPmNotifThrCfgRaise,
resulting in the OAM-PM Raise trap being … | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.7 |
| tmnxOamPmNotifThrOperClear The value of tmnxOamPmNotifThrOperClear indicates the value of the
delay or loss counter which met or fell below
tmnxOamPmNotifThrCfgClear, resulting in the OAM-PM Clear trap bein… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.3.8 |