tmnxOamPmCfgThrLossChliRaise
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.2
Object
column
r/w
Integer32
The value of tmnxOamPmCfgThrLossChliRaise specifies the raise
threshold for Consecutive High Loss Intervals (CHLIs).
Depending on the specified indices, tmnxOamPmCfgThrLossChliRaise is the
raise threshold for:
tmnxOamPmStsLossLmmChliBwd,
tmnxOamPmStsLossLmmChliFwd + tmnxOamPmStsLossLmmChliBwd,
tmnxOamPmStsLossLmmChliFwd,
tmnxOamPmStsLossSlmChliBwd,
tmnxOamPmStsLossSlmChliFwd + tmnxOamPmStsLossSlmChliBwd,
tmnxOamPmStsLossSlmChliFwd,
tmnxOamPmStsLossTwlChliBwd,
tmnxOamPmStsLossTwlChliFwd + tmnxOamPmStsLossTwlChliBwd, or
tmnxOamPmStsLossTwlChliFwd.
For example, suppose:
1. OAM-PM loss TCAs are enabled for the 'mi15minutes(2)' measurement
interval of the OAM-PM session OAM_PM_Eth_session_1 (using
tmnxOamPmCfgMeasIntvlLossTCAs and tmnxOamPmCfgMeasIntvlTCAs).
2. tmnxOamPmCfgThrLossChliRaise is set to 7 for the indices
{OAM_PM_Eth_session_1, 'slm(2)', 'forward(1)'}.
3. A 15 minute interval belonging to OAM_PM_Eth_session_1's SLM test
has its forward CHLI count (i.e. tmnxOamPmStsLossSlmChliFwd) increase
to 7.
4. Generating a CHLI Raise TCA is allowed (e.g. the most recent CHLI
TCA for the specified indices was a Clear).
Then, SROS immediately generates a CHLI Raise TCA (using
tmnxOamPmThrRaise) for the 15-minute interval, for the forward
direction.
Negative one specifies that CHLI thresholding is disabled for the
specified indices (i.e. SROS will not generate a Raise TCA, or a Clear
TCA).
tmnxOamPmCfgThrLossChliRaise must be greater than
tmnxOamPmCfgThrLossChliClear. Exception: the combination
tmnxOamPmCfgThrLossChliRaise=-1 and tmnxOamPmCfgThrLossChliClear=-1 is
supported.
tmnxOamPmCfgThrLossChliRaise and tmnxOamPmCfgThrLossChliClear must be
set in the same SNMP Set PDU.
The upper bound of this object is the maximum number of MEF-35
'delta_t' time intervals (also known as 'Small Time Intervals') which
can occur in a 24 hour measurement interval.
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxOamPmCfgThrLossFwBwAgEntry
- Table
- tmnxOamPmCfgThrLossFwBwAgTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 1-864000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmCfgForwardBackwardAggr The value of tmnxOamPmCfgForwardBackwardAggr specifies the direction
index of the row. | column | TmnxOamPmForwardBackwardAggr | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.1 |
| tmnxOamPmCfgThrLossUndtUnavlRais The value of tmnxOamPmCfgThrLossUndtUnavlRais specifies the raise
threshold for the number of availability indicators evaluated as
Unavailable based on extrapolation from the prev… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.10 |
| tmnxOamPmCfgThrLossUndtUnavlClr The value of tmnxOamPmCfgThrLossUndtUnavlClr specifies the clear
threshold for the number of availability indicators evaluated as
Unavailable based on extrapolation from the previ… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.11 |
| tmnxOamPmCfgThrLossChliClear The value of tmnxOamPmCfgThrLossChliClear specifies the clear
threshold for Consecutive High Loss Intervals (CHLIs).
tmnxOamPmCfgThrLossChliClear is the clear thres… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.3 |
| tmnxOamPmCfgThrLossHliRaise The value of tmnxOamPmCfgThrLossHliRaise specifies the raise threshold
for High Loss Intervals (HLIs).
tmnxOamPmCfgThrLossHliRaise has the same operating principles… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4 |
| tmnxOamPmCfgThrLossHliClear The value of tmnxOamPmCfgThrLossHliClear specifies the clear threshold
for High Loss Intervals (HLIs).
tmnxOamPmCfgThrLossHliClear has the same operating principles… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.5 |
| tmnxOamPmCfgThrLossUnavlIndRaise The value of tmnxOamPmCfgThrLossUnavlIndRaise specifies the raise
threshold for the number of availability indicators evaluated as
Unavailable.
tmnxOamPmCfgThrLossU… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.6 |
| tmnxOamPmCfgThrLossUnavlIndClear The value of tmnxOamPmCfgThrLossUnavlIndClear specifies the clear
threshold for the number of availability indicators evaluated as
Unavailable.
tmnxOamPmCfgThrLossU… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.7 |
| tmnxOamPmCfgThrLossUndtAvlRaise The value of tmnxOamPmCfgThrLossUndtAvlRaise specifies the raise
threshold for the number of availability indicators evaluated as
Available based on extrapolation from the previou… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.8 |
| tmnxOamPmCfgThrLossUndtAvlClear The value of tmnxOamPmCfgThrLossUndtAvlClear specifies the clear
threshold for the number of availability indicators evaluated as
Available based on extrapolation from the previou… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.9 |