vRtrMplsS2lSubLspRetryTimeRemain
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.28.1.12
Object
The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to signal this S2L sub LSP.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.28.1.12- Type
- column
- Access
- readonly
- Status
- current
- Units
- centiseconds
- Parent
- vRtrMplsS2lSubLspEntry
- Table
- vRtrMplsS2lSubLspTable
- Siblings
- 37
Syntax
centiseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsS2lSubLspDstAddrType The value of vRtrMplsS2lSubLspDstAddrType indicates the type of
vRtrMplsS2lSubLspDstAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.28.1.1 |
| vRtrMplsS2lSubGroupId The value of vRtrMplsS2lSubGroupId indicates the value which
identifies the group for this entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.10 |
| vRtrMplsS2lSubLspId The value of vRtrMplsS2lSubLspId indicates the value which identifies
the label switched path that is signaled for this entry. | column | MPLS-LSR-MIBMplsLSPID | .1.3.6.1.4.1.6527.3.1.2.6.28.1.11 |
| vRtrMplsS2lSubLspTunARHopLtIndex The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index
into the mplsTunnelARHopTable identifying a particular recorded hop
list. A value of 0 implies that there is … | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.13 |
| vRtrMplsS2lSubLspNegotiatedMTU The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.14 |
| vRtrMplsS2lSubLspFailCode The value of vRtrMplsS2lSubLspFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.28.1.15 |
| vRtrMplsS2lSubLspFailNodeArType The value of vRtrMplsS2lSubLspFailNodeArType indicates type of
vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this
value is 0. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.28.1.16 |
| vRtrMplsS2lSubLspFailNodeAddr The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of
the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.28.1.17 |
| vRtrMplsS2lSubLspOperBandwidth The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP S2L sub LSP.
… | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.18 |
| vRtrMplsS2lSubLspTunCRHopLtIndex The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index
into the vRtrMplsTunnelCHopTable identifying a particular computed hop
list. A value of 0 implies that there … | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.19 |
| vRtrMplsS2lSubLspDstAddr The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the
destination address of the S2L sub LSP. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.28.1.2 |
| vRtrMplsS2lSubLspOperMTU The value of vRtrMplsS2lSubLspOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently operation for this
P2MP LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.20 |
| vRtrMplsS2lSubLspLastResigAttpt The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this LSP was made. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.21 |
| vRtrMplsS2lSubLspLastMBBType The value of vRtrMplsS2lSubLspLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.28.1.22 |
| vRtrMplsS2lSubLspLastMBBEnd The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when
the last MBB ended. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.23 |
| vRtrMplsS2lSubLspLastMBBMetric The value of vRtrMplsS2lSubLspLastMBBMetric indicates the
cost of the traffic engineered S2L sub LSP for the S2L sub LSP
prior to MBB. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.24 |
| vRtrMplsS2lSubLspLastMBBState The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invok… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.28.1.25 |
| vRtrMplsS2lSubLspMBBTypeInProg The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.28.1.26 |
| vRtrMplsS2lSubLspMBBStarted The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when
the in-progress MBB started. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.27 |
| vRtrMplsS2lSubLspMBBNextRetry The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of
time remaining in seconds before the next attempt is made to retry the
in-progress MBB. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.28 |
| vRtrMplsS2lSubLspMBBRetryAttpts The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.29 |
| vRtrMplsS2lSubLspRowStatus The value of vRtrMplsS2lSubLspRowStatus specifies row status used for
creation, deletion, or control of vRtrMplsLspPathTable entries. Before
the row can be placed into the 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.28.1.3 |
| vRtrMplsS2lSubLspMBBFailCode The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code
for in-progress MBB failure. A value of 'none' indicates that no
failure has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.28.1.30 |
| vRtrMplsS2lSubLspMBBFailNodeType The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of
vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.28.1.31 |
| vRtrMplsS2lSubLspMBBFailNodeAddr The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address
of the node in the S2L sub LSP at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsS2lSubL… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.28.1.32 |
| vRtrMplsS2lSubLspUpTime The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the
S2l came up. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.33 |
| vRtrMplsS2lSubLspDownTime The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when
the S2l went down. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.34 |
| vRtrMplsS2lSubLspIsFastRetry The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer
is being referred to by vRtrMplsS2lSubLspRetryTimeRemain.
When the value of vRtrMplsLspPathIsF… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.28.1.35 |
| vRtrMplsS2lSubLspTimeoutIn The value of vRtrMplsS2lSubLspTimeoutIn indicates the amount of time
remaining, in seconds, for the S2L path state to time out after the
initial PATH message has been sent. If the… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.36 |
| vRtrMplsS2lSubLspMBBTimeoutIn The value of vRtrMplsS2lSubLspMBBTimeoutIn indicates the amount of
time remaining, in seconds, for the in-progress S2L MBB path state to
time out after the initial PATH message ha… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.28.1.37 |
| vRtrMplsS2lSubLspInterArea The value of vRtrMplsS2lSubLspInterArea indicates whether the LSP path
is either inter-area or intra-area. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.28.1.38 |
| vRtrMplsS2lSubLspLastChange The value of vRtrMplsS2lSubLspLastChange indicates the sysUpTime when
this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.28.1.4 |
| vRtrMplsS2lSubLspType The value of vRtrMplsS2lSubLspType indicates the value that represents
the role this S2L sub LSP is taking within this P2MP LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.28.1.5 |
| vRtrMplsS2lSubLspProperties The value of vRtrMplsS2lSubLspProperties indicates the set of
configured properties. For example, if the S2L sub LSP is an adaptive
S2L sub LSP, the bit corresponding to bit valu… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.28.1.6 |
| vRtrMplsS2lSubLspState The value of vRtrMplsS2lSubLspState indicates the current working
state of this S2L sub LSP within this LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.28.1.7 |
| vRtrMplsS2lSubLspAdminState The value of vRtrMplsS2lSubLspAdminState specifies the desired
administrative state for this P2MP S2L sub LSP. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.28.1.8 |
| vRtrMplsS2lSubLspOperState The value of vRtrMplsS2lSubLspOperState indicates the current
operational state of this P2MP S2L sub LSP. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.28.1.9 |