vRtrMplsS2lSubLspOperBandwidth

TIMETRA-MPLS-MIB · .1.3.6.1.4.1.6527.3.1.2.6.28.1.18
MIB view Table view

Object

column megabps SNMPv2-SMIInteger32 
The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP S2L sub LSP.
              
When make-before-break functionality for the P2MP LSP is enabled and
if the S2L sub LSP bandwidth is changed, the resources allocated to
the existing P2MP LSP paths will not be released until a new S2L sub
LSP with the new bandwidth settings has been established. While a new
S2L sub LSP is being signaled, the administrative value and the
operational values of the S2L sub LSP bandwidth may differ. The value
of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth requirements
for the new P2MP S2L sub LSP trying to be established whereas the
value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth
reserved for the existing P2MP S2L sub LSP.

Context

MIB
TIMETRA-MPLS-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.6.28.1.18
Type
column
Access
readonly
Status
current
Units
megabps
Parent
vRtrMplsS2lSubLspEntry
Table
vRtrMplsS2lSubLspTable
Siblings
37

Syntax

megabps SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vRtrMplsS2lSubLspDstAddrType
The value of vRtrMplsS2lSubLspDstAddrType indicates the type of vRtrMplsS2lSubLspDstAddr.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.6527.3.1.2.6.28.1.1
vRtrMplsS2lSubGroupId
The value of vRtrMplsS2lSubGroupId indicates the value which identifies the group for this entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.10
vRtrMplsS2lSubLspId
The value of vRtrMplsS2lSubLspId indicates the value which identifies the label switched path that is signaled for this entry.
columnMPLS-LSR-MIBMplsLSPID.1.3.6.1.4.1.6527.3.1.2.6.28.1.11
vRtrMplsS2lSubLspRetryTimeRemain
The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to signal this S2L sub LSP.
columncentiseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.12
vRtrMplsS2lSubLspTunARHopLtIndex
The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is …
columnInteger32.1.3.6.1.4.1.6527.3.1.2.6.28.1.13
vRtrMplsS2lSubLspNegotiatedMTU
The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this P2MP LSP Path.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.14
vRtrMplsS2lSubLspFailCode
The value of vRtrMplsS2lSubLspFailCode indicates the reason code for P2MP LSP Path failure. A value of 0 indicates that no failure has occurred.
columnTmnxMplsLspFailCode.1.3.6.1.4.1.6527.3.1.2.6.28.1.15
vRtrMplsS2lSubLspFailNodeArType
The value of vRtrMplsS2lSubLspFailNodeArType indicates type of vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this value is 0.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.6527.3.1.2.6.28.1.16
vRtrMplsS2lSubLspFailNodeAddr
The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed.
columnOctetString.1.3.6.1.4.1.6527.3.1.2.6.28.1.17
vRtrMplsS2lSubLspTunCRHopLtIndex
The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there …
columnInteger32.1.3.6.1.4.1.6527.3.1.2.6.28.1.19
vRtrMplsS2lSubLspDstAddr
The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the destination address of the S2L sub LSP.
columnOctetString.1.3.6.1.4.1.6527.3.1.2.6.28.1.2
vRtrMplsS2lSubLspOperMTU
The value of vRtrMplsS2lSubLspOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently operation for this P2MP LSP Path.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.20
vRtrMplsS2lSubLspLastResigAttpt
The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime when the last attempt to resignal this LSP was made.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.21
vRtrMplsS2lSubLspLastMBBType
The value of vRtrMplsS2lSubLspLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted.
columnTmnxMplsMBBType.1.3.6.1.4.1.6527.3.1.2.6.28.1.22
vRtrMplsS2lSubLspLastMBBEnd
The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when the last MBB ended.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.23
vRtrMplsS2lSubLspLastMBBMetric
The value of vRtrMplsS2lSubLspLastMBBMetric indicates the cost of the traffic engineered S2L sub LSP for the S2L sub LSP prior to MBB.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.24
vRtrMplsS2lSubLspLastMBBState
The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invok…
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.6.28.1.25
vRtrMplsS2lSubLspMBBTypeInProg
The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress.
columnTmnxMplsMBBType.1.3.6.1.4.1.6527.3.1.2.6.28.1.26
vRtrMplsS2lSubLspMBBStarted
The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when the in-progress MBB started.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.27
vRtrMplsS2lSubLspMBBNextRetry
The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.28
vRtrMplsS2lSubLspMBBRetryAttpts
The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth attempt for the MBB is in progress.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.29
vRtrMplsS2lSubLspRowStatus
The value of vRtrMplsS2lSubLspRowStatus specifies row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'activ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6527.3.1.2.6.28.1.3
vRtrMplsS2lSubLspMBBFailCode
The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred.
columnTmnxMplsLspFailCode.1.3.6.1.4.1.6527.3.1.2.6.28.1.30
vRtrMplsS2lSubLspMBBFailNodeType
The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.6527.3.1.2.6.28.1.31
vRtrMplsS2lSubLspMBBFailNodeAddr
The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address of the node in the S2L sub LSP at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsS2lSubL…
columnOctetString.1.3.6.1.4.1.6527.3.1.2.6.28.1.32
vRtrMplsS2lSubLspUpTime
The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the S2l came up.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.33
vRtrMplsS2lSubLspDownTime
The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when the S2l went down.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.34
vRtrMplsS2lSubLspIsFastRetry
The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer is being referred to by vRtrMplsS2lSubLspRetryTimeRemain. When the value of vRtrMplsLspPathIsF…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.6.28.1.35
vRtrMplsS2lSubLspTimeoutIn
The value of vRtrMplsS2lSubLspTimeoutIn indicates the amount of time remaining, in seconds, for the S2L path state to time out after the initial PATH message has been sent. If the…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.36
vRtrMplsS2lSubLspMBBTimeoutIn
The value of vRtrMplsS2lSubLspMBBTimeoutIn indicates the amount of time remaining, in seconds, for the in-progress S2L MBB path state to time out after the initial PATH message ha…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.6.28.1.37
vRtrMplsS2lSubLspInterArea
The value of vRtrMplsS2lSubLspInterArea indicates whether the LSP path is either inter-area or intra-area.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.6.28.1.38
vRtrMplsS2lSubLspLastChange
The value of vRtrMplsS2lSubLspLastChange indicates the sysUpTime when this row was last modified.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.6.28.1.4
vRtrMplsS2lSubLspType
The value of vRtrMplsS2lSubLspType indicates the value that represents the role this S2L sub LSP is taking within this P2MP LSP.
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.6.28.1.5
vRtrMplsS2lSubLspProperties
The value of vRtrMplsS2lSubLspProperties indicates the set of configured properties. For example, if the S2L sub LSP is an adaptive S2L sub LSP, the bit corresponding to bit valu…
columnBits.1.3.6.1.4.1.6527.3.1.2.6.28.1.6
vRtrMplsS2lSubLspState
The value of vRtrMplsS2lSubLspState indicates the current working state of this S2L sub LSP within this LSP.
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.6.28.1.7
vRtrMplsS2lSubLspAdminState
The value of vRtrMplsS2lSubLspAdminState specifies the desired administrative state for this P2MP S2L sub LSP.
columnTIMETRA-TC-MIBTmnxAdminState.1.3.6.1.4.1.6527.3.1.2.6.28.1.8
vRtrMplsS2lSubLspOperState
The value of vRtrMplsS2lSubLspOperState indicates the current operational state of this P2MP S2L sub LSP.
columnTIMETRA-TC-MIBTmnxOperState.1.3.6.1.4.1.6527.3.1.2.6.28.1.9