vRtrMplsP2mpInstResignal
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.25.1.25
Object
Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers
the resignaling of the P2MP LSP path.
If the P2MP LSP path is operationally down either due to network
failure or due to the retry attempts count being exceeded, setting
this variable to 'doAction' will initiate the signaling for the path.
A make-before-break signaling for the path will be initiated if the
P2MP LSP is operationally up but the make-before-break retry attempts
count was exceeded. Make-before-break signaling will also be initiated
for any P2MP LSP that is operationally up. This may be used to cause a
loose-hop P2MP LSP to be optimized.
If a resignal is triggered while a resignaling is already in progress,
the old transient state will be destroyed and a new transaction being
triggered.
An SNMP GET request on this object should return 'notApplicable'.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.25.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrMplsP2mpInstEntry
- Table
- vRtrMplsP2mpInstTable
- Siblings
- 39
Syntax
TIMETRA-TC-MIBTmnxActionType
- Source
- TIMETRA-TC-MIBTmnxActionType
- Base type
Enumeration
Values & Constraints
Type Values
1 | doAction |
2 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsP2mpInstIndex The unique value which identifies this Point to Multipoint Labeled
Switch Path (P2MP LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries wit… | column | TIMETRA-TC-MIBTmnxVRtrMplsLspID | .1.3.6.1.4.1.6527.3.1.2.6.25.1.1 |
| vRtrMplsP2mpInstHoldPriority The value of vRtrMplsP2mpInstHoldPriority indicates the hold
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared against … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.10 |
| vRtrMplsP2mpInstRecord The value of vRtrMplsP2mpInstRecord specifies whether recording of all
hops that a P2MP LSP traverses is enabled. When the value of
vRtrMplsP2mpInstRecord is 'true', recording of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.25.1.11 |
| vRtrMplsP2mpInstHopLimit The value of vRtrMplsP2mpInstHopLimit specifies the maximum number
of hops that a P2MP LSP will traverse including the ingress and
egress ESRs. A P2MP LSP will not be setup if th… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.12 |
| vRtrMplsP2mpInstAdminState The value of vRtrMplsP2mpInstAdminState specifies desired
administrative state for this P2MP LSP. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.25.1.13 |
| vRtrMplsP2mpInstOperState The value of vRtrMplsP2mpInstOperState indicates the current
operational state of this P2MP LSP. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.25.1.14 |
| vRtrMplsP2mpInstInheritance The value of vRtrMplsP2mpInstInheritance specifies whether or not
each writable object in this row inherits its value from its
corresponding object in the vRtrMplsLspTable. This … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.15 |
| vRtrMplsP2mpInstLspId The value of vRtrMplsP2mpInstLspId indicates the value which
identifies the label switched path that is signaled for this entry. | column | MPLS-LSR-MIBMplsLSPID | .1.3.6.1.4.1.6527.3.1.2.6.25.1.16 |
| vRtrMplsP2mpInstNegotiatedMTU The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.17 |
| vRtrMplsP2mpInstFailCode The value of vRtrMplsP2mpInstFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.25.1.18 |
| vRtrMplsP2mpInstFailNodeArType The value of vRtrMplsP2mpInstFailNodeArType indicates the type of
vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred,
vRtrMplsP2mpInstFailNodeArType is 0. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.19 |
| vRtrMplsP2mpInstRowStatus vRtrMplsP2mpInstRowStatus is used to create, delete or control entries
in the vRtrMplsP2mpInstTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.25.1.2 |
| vRtrMplsP2mpInstFailNodeAddr The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of
the node in the P2MP LSP path at which the P2MP LSP path failed. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.25.1.20 |
| vRtrMplsP2mpInstAdminGrpInclude The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that
specifies a list of admin groups that should be included when this
P2MP LSP is setup. If bit 'n' is set, then the ad… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.21 |
| vRtrMplsP2mpInstAdminGrpExclude The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that
specifies a list of admin groups that should be excluded when this
P2MP LSP is setup. If bit 'n' is set, then the ad… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.22 |
| vRtrMplsP2mpInstAdaptive The value of vRtrMplsP2mpInstAdaptive specifies whether
make-before-break functionality is enabled. If the value of
vRtrMplsP2mpInstAdaptive is set to 'true', it enables
make-befo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.25.1.23 |
| vRtrMplsP2mpInstOperBandwidth The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP LSP path.
… | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.24 |
| vRtrMplsP2mpInstOperMTU The value of vRtrMplsP2mpInstOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently in operation for
this P2MP LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.26 |
| vRtrMplsP2mpInstRecordLabel The value of vRtrMplsP2mpInstRecordLabel specifies when the value of
vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each
node that a P2MP LSP traverses is enabled… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.27 |
| vRtrMplsP2mpInstLastResigAttpt The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this P2MP LSP was made. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.28 |
| vRtrMplsP2mpInstMetric The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic
engineered path returned by the IGP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.29 |
| vRtrMplsP2mpInstLastChange The value of vRtrMplsP2mpInstLastChange indicates the timestamp of
last change to this row in vRtrMplsP2mpInstTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.3 |
| vRtrMplsP2mpInstLastMBBType The value of vRtrMplsP2mpInstLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.30 |
| vRtrMplsP2mpInstLastMBBEnd The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when
the last MBB ended. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.31 |
| vRtrMplsP2mpInstLastMBBMetric The value of vRtrMplsP2mpInstLastMBBMetric indicates the
cost of the traffic engineered path for the P2MP LSP path prior to
MBB. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.32 |
| vRtrMplsP2mpInstLastMBBState The value of vRtrMplsP2mpInstLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoke… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.33 |
| vRtrMplsP2mpInstMBBTypeInProg The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.34 |
| vRtrMplsP2mpInstMBBStarted The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when
the in-progress MBB started. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.35 |
| vRtrMplsP2mpInstMBBNextRetry The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.36 |
| vRtrMplsP2mpInstMBBRetryAttpts The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.37 |
| vRtrMplsP2mpInstMBBFailCode The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.25.1.38 |
| vRtrMplsP2mpInstMBBFailNodeType The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of
vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.39 |
| vRtrMplsP2mpInstName The value of vRtrMplsP2mpInstName specifies the administrative name
for the P2MP instance which must be unique within a virtual router
instance. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.25.1.4 |
| vRtrMplsP2mpInstMBBFailNodeAddr The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address
of the node in the P2MP LSP path at which the in-progress MBB failed.
A value of 'unknown' for vRtrMplsP2mpIn… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.25.1.40 |
| vRtrMplsP2mpInstType The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP
instance. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.5 |
| vRtrMplsP2mpInstProperties The value of vRtrMplsP2mpInstProperties indicates the set of configured
properties for this path expressed as a bit map. For example, if the
path is an adaptive path, the bit cor… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.25.1.6 |
| vRtrMplsP2mpInstBandwidth The value of vRtrMplsP2mpInstBandwidth specifies the amount of
bandwidth in megabits per second (Mbps) to be reserved for the P2MP
LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.25.1.7 |
| vRtrMplsP2mpInstState The value of vRtrMplsP2mpInstState indicates the current working state
of this path within this P2MP LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.8 |
| vRtrMplsP2mpInstSetupPriority The value of vRtrMplsP2mpInstSetupPriority indicates the setup
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared agains… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.9 |