vRtrMplsP2mpInstOperMTU
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.25.1.26
Object
column
SNMPv2-SMIUnsigned32
The value of vRtrMplsP2mpInstOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently in operation for this P2MP LSP Path.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.25.1.26- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vRtrMplsP2mpInstEntry
- Table
- vRtrMplsP2mpInstTable
- Siblings
- 39
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsP2mpInstIndex The unique value which identifies this Point to Multipoint Labeled
Switch Path (P2MP LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries wit… | column | TIMETRA-TC-MIBTmnxVRtrMplsLspID | .1.3.6.1.4.1.6527.3.1.2.6.25.1.1 |
| vRtrMplsP2mpInstHoldPriority The value of vRtrMplsP2mpInstHoldPriority indicates the hold
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared against … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.10 |
| vRtrMplsP2mpInstRecord The value of vRtrMplsP2mpInstRecord specifies whether recording of all
hops that a P2MP LSP traverses is enabled. When the value of
vRtrMplsP2mpInstRecord is 'true', recording of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.25.1.11 |
| vRtrMplsP2mpInstHopLimit The value of vRtrMplsP2mpInstHopLimit specifies the maximum number
of hops that a P2MP LSP will traverse including the ingress and
egress ESRs. A P2MP LSP will not be setup if th… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.12 |
| vRtrMplsP2mpInstAdminState The value of vRtrMplsP2mpInstAdminState specifies desired
administrative state for this P2MP LSP. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.25.1.13 |
| vRtrMplsP2mpInstOperState The value of vRtrMplsP2mpInstOperState indicates the current
operational state of this P2MP LSP. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.25.1.14 |
| vRtrMplsP2mpInstInheritance The value of vRtrMplsP2mpInstInheritance specifies whether or not
each writable object in this row inherits its value from its
corresponding object in the vRtrMplsLspTable. This … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.15 |
| vRtrMplsP2mpInstLspId The value of vRtrMplsP2mpInstLspId indicates the value which
identifies the label switched path that is signaled for this entry. | column | MPLS-LSR-MIBMplsLSPID | .1.3.6.1.4.1.6527.3.1.2.6.25.1.16 |
| vRtrMplsP2mpInstNegotiatedMTU The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.17 |
| vRtrMplsP2mpInstFailCode The value of vRtrMplsP2mpInstFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.25.1.18 |
| vRtrMplsP2mpInstFailNodeArType The value of vRtrMplsP2mpInstFailNodeArType indicates the type of
vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred,
vRtrMplsP2mpInstFailNodeArType is 0. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.19 |
| vRtrMplsP2mpInstRowStatus vRtrMplsP2mpInstRowStatus is used to create, delete or control entries
in the vRtrMplsP2mpInstTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.25.1.2 |
| vRtrMplsP2mpInstFailNodeAddr The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of
the node in the P2MP LSP path at which the P2MP LSP path failed. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.25.1.20 |
| vRtrMplsP2mpInstAdminGrpInclude The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that
specifies a list of admin groups that should be included when this
P2MP LSP is setup. If bit 'n' is set, then the ad… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.21 |
| vRtrMplsP2mpInstAdminGrpExclude The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that
specifies a list of admin groups that should be excluded when this
P2MP LSP is setup. If bit 'n' is set, then the ad… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.22 |
| vRtrMplsP2mpInstAdaptive The value of vRtrMplsP2mpInstAdaptive specifies whether
make-before-break functionality is enabled. If the value of
vRtrMplsP2mpInstAdaptive is set to 'true', it enables
make-befo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.25.1.23 |
| vRtrMplsP2mpInstOperBandwidth The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP LSP path.
… | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.24 |
| vRtrMplsP2mpInstResignal Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers
the resignaling of the P2MP LSP path.
If the P2MP LSP path is operationally down either due to … | column | TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.25 |
| vRtrMplsP2mpInstRecordLabel The value of vRtrMplsP2mpInstRecordLabel specifies when the value of
vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each
node that a P2MP LSP traverses is enabled… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.27 |
| vRtrMplsP2mpInstLastResigAttpt The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this P2MP LSP was made. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.28 |
| vRtrMplsP2mpInstMetric The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic
engineered path returned by the IGP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.29 |
| vRtrMplsP2mpInstLastChange The value of vRtrMplsP2mpInstLastChange indicates the timestamp of
last change to this row in vRtrMplsP2mpInstTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.3 |
| vRtrMplsP2mpInstLastMBBType The value of vRtrMplsP2mpInstLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.30 |
| vRtrMplsP2mpInstLastMBBEnd The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when
the last MBB ended. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.31 |
| vRtrMplsP2mpInstLastMBBMetric The value of vRtrMplsP2mpInstLastMBBMetric indicates the
cost of the traffic engineered path for the P2MP LSP path prior to
MBB. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.32 |
| vRtrMplsP2mpInstLastMBBState The value of vRtrMplsP2mpInstLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoke… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.33 |
| vRtrMplsP2mpInstMBBTypeInProg The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.34 |
| vRtrMplsP2mpInstMBBStarted The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when
the in-progress MBB started. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.25.1.35 |
| vRtrMplsP2mpInstMBBNextRetry The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.36 |
| vRtrMplsP2mpInstMBBRetryAttpts The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.37 |
| vRtrMplsP2mpInstMBBFailCode The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.25.1.38 |
| vRtrMplsP2mpInstMBBFailNodeType The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of
vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.25.1.39 |
| vRtrMplsP2mpInstName The value of vRtrMplsP2mpInstName specifies the administrative name
for the P2MP instance which must be unique within a virtual router
instance. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.25.1.4 |
| vRtrMplsP2mpInstMBBFailNodeAddr The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address
of the node in the P2MP LSP path at which the in-progress MBB failed.
A value of 'unknown' for vRtrMplsP2mpIn… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.25.1.40 |
| vRtrMplsP2mpInstType The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP
instance. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.5 |
| vRtrMplsP2mpInstProperties The value of vRtrMplsP2mpInstProperties indicates the set of configured
properties for this path expressed as a bit map. For example, if the
path is an adaptive path, the bit cor… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.25.1.6 |
| vRtrMplsP2mpInstBandwidth The value of vRtrMplsP2mpInstBandwidth specifies the amount of
bandwidth in megabits per second (Mbps) to be reserved for the P2MP
LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.25.1.7 |
| vRtrMplsP2mpInstState The value of vRtrMplsP2mpInstState indicates the current working state
of this path within this P2MP LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.25.1.8 |
| vRtrMplsP2mpInstSetupPriority The value of vRtrMplsP2mpInstSetupPriority indicates the setup
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared agains… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.25.1.9 |