vRtrMplsLspSwitchStbyFailure

TIMETRA-MPLS-MIB · .1.3.6.1.4.1.6527.3.1.3.6.0.20
MIB view Table view

Object

notification 
[CAUSE] The vRtrMplsLspSwitchStbyFailure notification is generated to
report an unsuccessful switchover from the current active secondary
LSP path of an LSP to another secondary standby LSP path. The reason
for the failure is specified by vRtrMplsLspSwitchStbyReasonCode.
          
[EFFECT] The switchover to the new standby path failed for the LSP.
          
[RECOVERY] The vRtrMplsLspSwitchStbyReasonCode will help the user
troubleshoot the failure.  The user can attempt to switchover to
another standby LSP path again.

Context

MIB
TIMETRA-MPLS-MIB
OID
.1.3.6.1.4.1.6527.3.1.3.6.0.20
Type
notification
Status
current
Parent
tmnxMplsNotifications
Siblings
26

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vRtrMplsStateChange
This Notification is generated when the MPLS module changes state
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.1
vRtrMplsP2mpInstanceDown
This Notification is generated when a P2MP instance transitions out of 'inService' state to any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.10
vRtrMplsS2lSubLspUp
This Notification is generated when a S2l sub LSP transitions to the 'inService' state from any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.11
vRtrMplsS2lSubLspDown
This Notification is generated when a S2l sub LSP transitions out of 'inService' state to any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.12
vRtrMplsS2lSubLspRerouted
The vRtrMplsS2lSubLspRerouted notification is generated when an S2l sub LSP is rerouted.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.13
vRtrMplsS2lSubLspResignaled
The vRtrMplsS2lSubLspResignaled notification is generated when an S2l sub LSP is resignalled. The vRtrMplsS2lSubLspLastMBBType indicates the reason why the S2l sub LSP was resigna…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.14
vRtrMplsLspPathSoftPreempted
The vRtrMplsLspPathSoftPreempted notification is generated when an LSP Path is soft-preempted.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.15
vRtrMplsLspPathLstFillReoptElig
The vRtrMplsLspPathLstFillReoptElig notification is set/reset based on when a timer based resignal found/did not find a path with the same cost but which has a better least-fill m…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.16
vRtrMplsP2mpInstanceResignaled
This Notification is generated when a P2MP instance is resignalled. The vRtrMplsP2mpInstLastMBBType indicates the reason why the P2MP instance was resignalled.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.17
vRtrMplsResignalTimerExpired
The vRtrMplsResignalTimerExpired notification is generated when the resignal timer expires for a MPLS instance. Make before break (MBB) would be started only on those P2P LSP (Poi…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.18
vRtrMplsLspPathMbbStatusEvent
The vRtrMplsLspPathMbbStatusEvent notification is generated to report the status of the make-before-break(MBB) operation for the LSP path.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.19
vRtrMplsIfStateChange
This Notification is generated when the MPLS interface changes state
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.2
vRtrMplsLspActivePathChanged
[CAUSE] The vRtrMplsLspActivePathChanged notification is generated when the active path of an LSP successfully switches to an new path. This notification will also be s…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.21
vRtrMplsXCBundleChange
[CAUSE] vRtrMplsXCBundleChange is generated when one or more RSVP sessions changed state and retained the changed state for an entire quiet interval of 2 minutes or the maximum in…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.22
vRtrMplsLblRangeModify obsolete
[CAUSE] vRtrMplsLblRangeModify is generated when the values of vRtrMplsLabelMaxStaticLspLabels or vRtrMplsLabelMaxStaticSvcLabels have been modified. [EFFECT] The maxim…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.23
vRtrMplsNodeInIgpOverload
[CAUSE] The vRtrMplsNodeInIgpOverload notification is generated when MPLS gets a notification that a node is in IGP overload state. [EFFECT] The LSPs transiting through…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.24
vRtrMplsIPv6StateChange
[CAUSE] The vRtrMplsIPv6StateChange notification is generated when MPLS protocol instance changes state. [EFFECT] The SR-TE LSPs with IPv6 addresses transition state. …
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.25
vRtrMplsIfIPv6StateChange
[CAUSE] The vRtrMplsIPv6StateChange notification is generated when MPLS interface changes state. [EFFECT] The SR-TE LSPs with IPv6 addresses transition state. …
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.26
vRtrMplsLspResourceExhaustion
[CAUSE] The vRtrMplsLspResourceExhaustion notification is generated when CPM or data path resource specified by vRtrMplsResourceType is exhausted. [EFFECT] If vRtrMplsR…
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.27
vRtrMplsLspUp
This Notification is generated when a LSP transitions to the 'inService' state from any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.3
vRtrMplsLspDown
This Notification is generated when an LSP transitions out of 'inService' state to any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.4
vRtrMplsLspPathUp
This Notification is generated when a LSP Path transitions to the 'inService' state from any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.5
vRtrMplsLspPathDown
This Notification is generated when a LSP Path transitions out of 'inService' state to any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.6
vRtrMplsLspPathRerouted
The vRtrMplsLspPathRerouted notification is generated when an LSP Path is rerouted.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.7
vRtrMplsLspPathResignaled
The vRtrMplsLspPathResignaled notification is generated when an LSP Path is resignalled. The vRtrMplsLspPathLastMBBType indicates the reason why the LSP Path was resignalled.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.8
vRtrMplsP2mpInstanceUp
This Notification is generated when a P2MP instance transitions to the 'inService' state from any other state.
notification-.1.3.6.1.4.1.6527.3.1.3.6.0.9
Notification Objects
ObjectTypeSyntaxOID
TIMETRA-VRTR-MIBvRtrID
The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initializa…
columnTIMETRA-TC-MIBTmnxVRtrID.1.3.6.1.4.1.6527.3.1.2.3.1.1.1
vRtrMplsLspIndex
The value of vRtrMplsLspIndex specifies the Labeled Switch Path (LSP) index for this virtual router in the Nokia SROS system. It is a unique value among entries with the same val…
columnTIMETRA-TC-MIBTmnxVRtrMplsLspID.1.3.6.1.4.1.6527.3.1.2.6.1.1.1
vRtrMplsLspAdminState
The desired administrative state for this LSP.
columnTIMETRA-TC-MIBTmnxAdminState.1.3.6.1.4.1.6527.3.1.2.6.1.1.5
vRtrMplsLspOperState
The current operational state of this LSP.
columnTIMETRA-TC-MIBTmnxOperState.1.3.6.1.4.1.6527.3.1.2.6.1.1.6
vRtrMplsLspSwitchStbyPathForce
The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force a switch from an active LSP path to a new standby path as specified by the values of vRtrMplsLspSwitchStbyPa…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.6.1.1.57
vRtrMplsLspSwitchStbyPathIndex
The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for the new standby LSP path in mplsTunnelTable. vRtrMplsLspSwitchStbyPath must also be set to 'doAc…
columnMPLS-TE-MIBMplsTunnelIndex.1.3.6.1.4.1.6527.3.1.2.6.1.1.56
vRtrMplsLspSwitchStbyReasonCode
The value of vRtrMplsLspSwitchStbyReasonCode indicates the reason for the failure of switch to a new standby path from the current active standby path.
scalarEnumeration.1.3.6.1.4.1.6527.3.1.2.6.16.13