vRtrMplsLspCspfToFirstLoose
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.1.1.51
Object
The value of the vRtrMplsLspCspfToFirstLoose specifies whether the
CSPF calculation till the first loose hop on ingress Label Edge Router
(LER) is enabled or disabled for this Labeled Switched Path(LSP).
By default, the value of vRtrMplsLspCspfToFirstLoose is 'false' which
specifies that the CSPF calculation is done to the destination of LSP.
This object was deprecated in the 11.0 release.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.1.1.51- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- vRtrMplsLspEntry
- Table
- vRtrMplsLspTable
- Siblings
- 77
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspIndex The value of vRtrMplsLspIndex specifies the Labeled Switch
Path (LSP) index for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same val… | column | TIMETRA-TC-MIBTmnxVRtrMplsLspID | .1.3.6.1.4.1.6527.3.1.2.6.1.1.1 |
| vRtrMplsLspOutSegIndx The vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.10 |
| vRtrMplsLspRetryTimer The value of vRtrMplsLspRetryTimer specifies the time in seconds the
software will wait before attempting the establish the failed LSP. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.11 |
| vRtrMplsLspRetryLimit The value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that a… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.12 |
| vRtrMplsLspMetric The value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP wit… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.13 |
| vRtrMplsLspDecrementTtl obsolete When the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.14 |
| vRtrMplsLspCspf obsolete When the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.15 |
| vRtrMplsLspFastReroute When the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.16 |
| vRtrMplsLspFRHopLimit The value of vRtrMplsLspFRHopLimit specifies the total number of hops
a detour LSP can take before merging back onto the main LSP path. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.17 |
| vRtrMplsLspFRBandwidth The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth
in megabits per second (Mbps) to be reserved for the detour LSP. A
value of zero (0) indicates that no bandwi… | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.18 |
| vRtrMplsLspClassOfService obsolete The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the g… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.1.1.19 |
| vRtrMplsLspRowStatus The row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.1.1.2 |
| vRtrMplsLspSetupPriority The value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.20 |
| vRtrMplsLspHoldPriority The value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold pr… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.21 |
| vRtrMplsLspRecord When the value of vRtrMplsLspRecord is 'true', recording of all the
hops that a LSP traverses is enabled.
When the value of vRtrMplsLspRecord is 'false, recording o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.22 |
| vRtrMplsLspPreference obsolete The value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egres… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.23 |
| vRtrMplsLspBandwidth obsolete The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in
megabits per second (Mbps) to be reserved for the LSP. A value of zero
(0) indicates that no bandwidth is re… | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.24 |
| vRtrMplsLspBwProtect obsolete When vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guarantee… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.25 |
| vRtrMplsLspHopLimit The value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.26 |
| vRtrMplsLspNegotiatedMTU The value of vRtrMplsLspNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during LSP
establishment. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.27 |
| vRtrMplsLspRsvpResvStyle The value of vRtrMplsLspRsvpResvStyle specifies the reservation style
for RSVP. The reservation style can be set to 'Shared- Explicit' (se)
or 'Fixed-Filter' (ff). | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.1.1.28 |
| vRtrMplsLspRsvpAdspec When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object
will be included in RSVP messages. When the value of
vRtrMplsLspRsvpAdspec is 'false', the ADSPEC object will … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.29 |
| vRtrMplsLspLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.1.1.3 |
| vRtrMplsLspFRMethod The value of vRtrMplsLspFRMethod specifies the fast reroute method
used.
In the 'One-to-one Backup' method, a backup LSP is established which
will intersect the ori… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.1.1.30 |
| vRtrMplsLspFRNodeProtect Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node
protection i.e. protection against the failure of a node on the LSP.
Setting the value to 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.31 |
| vRtrMplsLspAdminGroupInclude The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies
a list of admin groups that should be included when this LSP is setup.
If bit 'n' is set, then the admin grou… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.32 |
| vRtrMplsLspAdminGroupExclude The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies
a list of admin groups that should be excluded when this LSP is setup.
If bit 'n' is set, then the admin grou… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.33 |
| vRtrMplsLspAdaptive Setting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes of an
already established LSP are changed, either throu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.34 |
| vRtrMplsLspInheritance For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspInherita… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.35 |
| vRtrMplsLspOptimizeTimer The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds,
the software will wait before attempting to re-optimize the LSP.
When CSPF is enabled, changes… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.36 |
| vRtrMplsLspOperFastReroute The value of vRtrMplsLspOperFastReroute indicates whether the
operational LSP has fast reroute enabled or disabled.
When make-before-break functionality for the LSP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.37 |
| vRtrMplsLspFRObject The value of vRtrMplsLspFRObject specifies whether fast reroute, for
LSPs using 'Facility Backup', is signalled with or without the fast
reroute object. The value of vRtrMplsLspFR… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.38 |
| vRtrMplsLspHoldTimer The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for
which the ingress node holds a bit before programming its data plane
and declaring the lsp up to the service … | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.39 |
| vRtrMplsLspName Administrative name for this Labeled Switch Path. The vRtrMplsLspName
must be unique within a virtual router instance.
When the value of the object vRtrMplsLspType … | column | TIMETRA-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.1.1.4 |
| vRtrMplsLspCspfTeMetricEnabled obsolete The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by
CSPF. When the value of this object is 'fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.40 |
| vRtrMplsLspP2mpId The value of vRtrMplsLspP2mpId specifies a unique identifier known as
point to multipoint (P2MP) identifier (ID). | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.41 |
| vRtrMplsLspClassType The value of vRtrMplsLspClassType specifies the class type (CT)
associated with this LSP. | column | TIMETRA-TC-MIBTmnxRsvpDSTEClassType | .1.3.6.1.4.1.6527.3.1.2.6.1.1.42 |
| vRtrMplsLspOperMetric The value of vRtrMplsLspOperMetric indicates the operational metric
for the LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.43 |
| vRtrMplsLspLdpOverRsvpInclude The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.44 |
| vRtrMplsLspLeastFill The value of vRtrMplsLspLeastFill specifies whether the use of the
least-fill path selection method for the computation of the path of
this LSP is enabled.
By defau… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.45 |
| vRtrMplsLspVprnAutoBindInclude The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.46 |
| vRtrMplsLspMainCTRetryLimit The value of vRtrMplsLspMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.47 |
| vRtrMplsLspIgpShortcut The value of vRtrMplsLspIgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving IGP
routes.
When the value of v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.48 |
| vRtrMplsLspOriginTemplate When the value of the vRtrMplsLspType is 'p2mpAuto', the value of
vRtrMplsLspOriginTemplate indicates the LSP Template which was used to
create this LSP.
For all ot… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.1.1.49 |
| vRtrMplsLspAdminState The desired administrative state for this LSP. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.1.1.5 |
| vRtrMplsLspAutoBandwidth The value of the vRtrMplsLspAutoBandwidth specifies whether automatic
bandwidth adjustment has been enabled or disabled for this LSP.
A value of 'true' specifies th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.50 |
| vRtrMplsLspPropAdminGroup The value of the vRtrMplsLspPropAdminGroup specifies whether the
propagation of session attribute object with resource affinity (C-type
1) in PATH message is enabled.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.52 |
| vRtrMplsLspBgpShortcut The value of vRtrMplsLspBgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving BGP
routes.
When the value of v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.53 |
| vRtrMplsLspBgpTransportTunnel The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.
When the value… | column | TmnxMplsLspBgpRSVPLSPTunState | .1.3.6.1.4.1.6527.3.1.2.6.1.1.54 |
| vRtrMplsLspSwitchStbyPath The value of vRtrMplsLspSwitchStbyPath specifies whether to trigger
the switch from the current active standby LSP path to a new LSP path
as specified by vRtrMplsLspSwitchStbyPath… | column | TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.6.1.1.55 |
| vRtrMplsLspSwitchStbyPathIndex The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for
the new standby LSP path in mplsTunnelTable.
vRtrMplsLspSwitchStbyPath must also be set to 'doAc… | column | MPLS-TE-MIBMplsTunnelIndex | .1.3.6.1.4.1.6527.3.1.2.6.1.1.56 |
| vRtrMplsLspSwitchStbyPathForce The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force
a switch from an active LSP path to a new standby path as specified by
the values of vRtrMplsLspSwitchStbyPa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.57 |
| vRtrMplsLspExcludeNodeAddrType The value of vRtrMplsLspExcludeNodeAddrType specifies the type of
vRtrMplsLspExcludeNodeAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.1.1.58 |
| vRtrMplsLspExcludeNodeAddr When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude
Routers) object will be included in bypass path message with supplied
IP address.
SET the val… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.1.1.59 |
| vRtrMplsLspOperState The current operational state of this LSP. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.1.1.6 |
| vRtrMplsLspIgpShortcutLfaType The value of vRtrMplsLspIgpShortcutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exc… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.1.1.60 |
| vRtrMplsLspToAddrType The vRtrMplsLspToAddrType object is an enumerated value that specifies
the destination address type of the LSP.
The value of 'ipv4' specifies an IPv4 address and vR… | column | TmnxMplsLspAddrType | .1.3.6.1.4.1.6527.3.1.2.6.1.1.61 |
| vRtrMplsLspFromAddrType The vRtrMplsLspFromAddrType object is an enumerated value that
specifies the source address type of the LSP.
When the value of vRtrMplsLspFromAddrType is 'ipv4', it… | column | TmnxMplsLspAddrType | .1.3.6.1.4.1.6527.3.1.2.6.1.1.62 |
| vRtrMplsLspToNodeId The value of vRtrMplsLspToNodeId specifies the destination node id of
an MPLS-TP Static LSP.
vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is set to
… | column | TIMETRA-TC-MIBTmnxMplsTpNodeID | .1.3.6.1.4.1.6527.3.1.2.6.1.1.63 |
| vRtrMplsLspFromNodeId The value of vRtrMplsLspFromNodeId indicates the source node id of an
MPLS-TP Static LSP. | column | TIMETRA-TC-MIBTmnxMplsTpNodeID | .1.3.6.1.4.1.6527.3.1.2.6.1.1.64 |
| vRtrMplsLspDestGlobalId The value of vRtrMplsLspDestGlobalId specifies the destination global
identifier for an MPLS-TP Static LSP.
When the vRtrMplsLspDestGlobalId bit in vRtrMplsLspInher… | column | TIMETRA-TC-MIBTmnxMplsTpGlobalID | .1.3.6.1.4.1.6527.3.1.2.6.1.1.65 |
| vRtrMplsLspDestTunnelNum The value of vRtrMplsLspDestTunnelNum specifies the destination tunnel
number of an MPLS-TP Static LSP.
A value of 0 indicates that vRtrMplsLspIndex is to be used a… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.66 |
| vRtrMplsLspFRPropAdminGroup The value of vRtrMplsLspFRPropAdminGroup specifies whether or not the
use of administrative group constraints on a FRR backup LSP is
enabled.
If vRtrMplsLspFastRero… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.67 |
| vRtrMplsLspIgpShortcutRelOffset The value of vRtrMplsLspIgpShortcutRelOffset specifies the the
relative offset to the IGP metric on the SPF tree.
The SPF tree is updated with the current IGP metri… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.68 |
| vRtrMplsLspRevertTimer The value of vRtrMplsLspRevertTimer specifies a revert timer for a
Labeled Switch Path (LSP).
When the value of vRtrMplsLspRevertTimer is set to '0', it cancels any… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.69 |
| vRtrMplsLspFromAddr obsolete The vRtrMplsLspFromAddr specifies the source address of this LSP.
When vRtrMplsLspFromAddrType is 'ipv4', vRtrMplsLspFromAddr should
also be specified.
… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.6.1.1.7 |
| vRtrMplsLspRevertTimeRemain The value of vRtrMplsLspRevertTimeRemain indicates the time remaining
in minutes before the revert timer would expire causing an lsp revert
to primary path. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.70 |
| vRtrMplsLspLoadBalancingWeight The value of vRtrMplsLspLoadBalancingWeight specifies the load
balancing weight applied to this Labeled Switch Path(LSP). When a
system level load-balancing command is enabled, pa… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.71 |
| vRtrMplsLspClassFwdingEnabled The value of vRtrMplsLspClassFwdingEnabled specifies whether class
based forwarding over this MPLS LSP is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.72 |
| vRtrMplsLspFC obsolete The value of vRtrMplsLspFC specifies a set of forwarding classes
configured for this LSP expressed as a bit map. If a bit from 0
through 7 is set, then the corresponding forwardin… | column | TIMETRA-TC-MIBTmnxCBFClasses | .1.3.6.1.4.1.6527.3.1.2.6.1.1.73 |
| vRtrMplsLspBfdTemplateName The value of vRtrMplsLspBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.1.1.74 |
| vRtrMplsLspBfdEnable The value of vRtrMplsLspBfdEnable specifies whether BFD is enabled or
not for this LSP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.1.1.75 |
| vRtrMplsLspBfdPingIntvl The value of vRtrMplsLspBfdPingIntvl specifies the time interval for
periodic LSP ping for BFD bootstrapping.
The object vRtrMplsLspBfdPingIntvl is applicable to LS… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.1.1.76 |
| vRtrMplsLspNgFromAddr The value of vRtrMplsLspNgFromAddr specifices the source address of
this LSP. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.1.1.77 |
| vRtrMplsLspNgToAddr The value of vRtrMplsLspNgToAddr specifices the destination address of
this LSP. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.1.1.78 |
| vRtrMplsLspToAddr obsolete The vRtrMplsLspToAddr specifies the destination address of this LSP.
When vRtrMplsLspToAddrType is 'ipv4', vRtrMplsLspToAddr should also be
specified.
… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.6.1.1.8 |
| vRtrMplsLspType The value of object vRtrMplsLspType specifies whether the label value
is statically or dynamically assigned or whether the LSP will be used
exclusively for bypass protection. The … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.1.1.9 |