vRtrMplsLspAutoBWSecRetryLimit
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.43.1.43
Object
column
r/w
Unsigned32
The value of vRtrMplsLspAutoBWSecRetryLimit specifies the max number
of retry attempts that will be made to signal the secondary path with
the last adjusted bandwidth. After the number of retry attempts is
exceeded, no more attempts will be made to resignal the secondary path
and the path will remain operationally down. A value of zero(0)
specifies that the retry limit is infinite.
This variable is valid only if vRtrMplsLspAutoBWUseLastAdjBW is set to
'enabled'.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.43.1.43- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrMplsLspAutoBandwidthEntry
- Table
- vRtrMplsLspAutoBandwidthTable
- Siblings
- 43
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspAutoBWLspName The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the
vRtrMplsLspAutoBandwidthTable.
If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLs… | column | TIMETRA-TC-MIBTLNamedItem | .1.3.6.1.4.1.6527.3.1.2.6.43.1.1 |
| vRtrMplsLspAutoBWMonitorBW The value of vRtrMplsLspAutoBWMonitorBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP.
When the val… | column | megabps SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.43.1.10 |
| vRtrMplsLspAutoBWOverFlow The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow
samples that triggers an overflow auto-bandwidth adjustment attempt. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.11 |
| vRtrMplsLspAutoBWOvrFlwThreshold The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.12 |
| vRtrMplsLspAutoBWOvrFlwBW The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbp… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.13 |
| vRtrMplsLspAutoBWSampMultiplier The value of vRtrMplsLspAutoBWSampMultiplier specifies the multiplier
for collection intervals in a sample interval. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.14 |
| vRtrMplsLspAutoBWSampTime The value of vRtrMplsLspAutoBWSampTime indicates the sample multiplier
times the collection interval. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.15 |
| vRtrMplsLspAutoBWLastAdj The value of vRtrMplsLspAutoBWLastAdj indicates the system time for
the last auto-bandwidth adjustment. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.43.1.16 |
| vRtrMplsLspAutoBWLastAdjCause The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the
last auto-bandwidth adjustment. | column | TmnxMplsLspAutoBWLastAdjCause | .1.3.6.1.4.1.6527.3.1.2.6.43.1.17 |
| vRtrMplsLspAutoBWNextAdj The value of vRtrMplsLspAutoBWNextAdj indicates the system time when
then adjust-timer will expire. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.18 |
| vRtrMplsLspAutoBWMaxAvgRate The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average
data rate in any sample interval of the current adjust interval. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.19 |
| vRtrMplsLspAutoBWLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.43.1.2 |
| vRtrMplsLspAutoBWLastAvgRate The value of vRtrMplsLspAutoBWLastAvgRate indicates the average data
rate in the sample interval that ended most recently. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.20 |
| vRtrMplsLspAutoBWInheritance For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspAutoBWIn… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.21 |
| vRtrMplsLspAutoBWCurrentBW The value of vRtrMplsLspAutoBWCurrentBW indicates the current
bandwidth reserved along the primary path. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.22 |
| vRtrMplsLspAutoBWAdjTime The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multiplier
times the collection interval. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.23 |
| vRtrMplsLspAutoBWOvrFlwCount The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of
overflow samples since the last reset. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.24 |
| vRtrMplsLspAutoBWSampCount The value of vRtrMplsLspAutoBWSampCount indicates the count in the
sample interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.25 |
| vRtrMplsLspAutoBWAdjCount The value of vRtrMplsLspAutoBWAdjCount indicates the count in the
adjust interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.26 |
| vRtrMplsLspAutoBWOperState The value of vRtrMplsLspAutoBWOperState indicates the operational
status for the LSP. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.6.43.1.27 |
| vRtrMplsLspAutoBWSampInterval The value of vRtrMplsLspAutoBWSampInterval indicates the number of
sample intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.28 |
| vRtrMplsLspAutoBWBeWeight The value of vRtrMplsLspAutoBWBeWeight specifies the weight in percent
for forwarding class 'BE' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.29 |
| vRtrMplsLspAutoBWAdjDNPercent The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expresse… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.3 |
| vRtrMplsLspAutoBWL2Weight The value of vRtrMplsLspAutoBWL2Weight specifies the weight in percent
for forwarding class 'L2' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.30 |
| vRtrMplsLspAutoBWAfWeight The value of vRtrMplsLspAutoBWAfWeight specifies the weight in percent
for forwarding class 'AF' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.31 |
| vRtrMplsLspAutoBWL1Weight The value of vRtrMplsLspAutoBWL1Weight specifies the weight in percent
for forwarding class 'L1' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.32 |
| vRtrMplsLspAutoBWH2Weight The value of vRtrMplsLspAutoBWH2Weight specifies the weight in percent
for forwarding class 'H2' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.33 |
| vRtrMplsLspAutoBWEfWeight The value of vRtrMplsLspAutoBWEfWeight specifies the weight in percent
for forwarding class 'EF' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.34 |
| vRtrMplsLspAutoBWH1Weight The value of vRtrMplsLspAutoBWH1Weight specifies the weight in percent
for forwarding class 'H1' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.35 |
| vRtrMplsLspAutoBWNcWeight The value of vRtrMplsLspAutoBWNcWeight specifies the weight in percent
for forwarding class 'NC' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.36 |
| vRtrMplsLspAutoBWUnderFlow The value of vRtrMplsLspAutoBWUnderFlow specifies the number of
underflow samples that triggers an underflow auto-bandwidth adjustment
attempt. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.37 |
| vRtrMplsLspAutoBWUndFlwThreshold The value of vRtrMplsLspAutoBWUndFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.38 |
| vRtrMplsLspAutoBWUndFlwBW The value of vRtrMplsLspAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbp… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.39 |
| vRtrMplsLspAutoBWAdjDNMbps The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, express… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.4 |
| vRtrMplsLspAutoBWUndFlwCount The value of vRtrMplsLspAutoBWUndFlwCount indicates the number of
underflow samples since the last reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.40 |
| vRtrMplsLspAutoBWMaxUndFlwBw The value of vRtrMplsLspAutoBWMaxUndFlwBw indicates the maximum
sampled bandwidth in the most recent consecutive underflow samples. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.41 |
| vRtrMplsLspAutoBWUseLastAdjBW The value of vRtrMplsLspAutoBWUseLastAdjBW specifies whether use of
last adjusted bandwidth is enabled or diabled.
When the value is 'true' the use of last adjusted… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.43.1.42 |
| vRtrMplsLspAutoBWLastAdjBW The value of vRtrMplsLspAutoBWLastAdjBW indicates the last adjusted
bandwidth for the LSP. A value of -1 indicates that this value is
invalid | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.44 |
| vRtrMplsLspAutoBWAdjMultiplier The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of
collection intervals in the adjust interval.
The default value is derived from vRtrMplsGeneralAu… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.5 |
| vRtrMplsLspAutoBWAdjUPPercent The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expresse… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.6 |
| vRtrMplsLspAutoBWAdjUPMbps The value of vRtrMplsLspAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, express… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.7 |
| vRtrMplsLspAutoBWMaxBW The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.8 |
| vRtrMplsLspAutoBWMinBW The value of vRtrMplsLspAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.9 |