vRtrMplsLspAutoBWCurrentBW
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.43.1.22
Object
The value of vRtrMplsLspAutoBWCurrentBW indicates the current bandwidth reserved along the primary path.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.43.1.22- Type
- column
- Access
- readonly
- Status
- current
- Units
- megabps
- Parent
- vRtrMplsLspAutoBandwidthEntry
- Table
- vRtrMplsLspAutoBandwidthTable
- Siblings
- 43
Syntax
megabps SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspAutoBWLspName The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the
vRtrMplsLspAutoBandwidthTable.
If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLs… | column | TIMETRA-TC-MIBTLNamedItem | .1.3.6.1.4.1.6527.3.1.2.6.43.1.1 |
| vRtrMplsLspAutoBWMonitorBW The value of vRtrMplsLspAutoBWMonitorBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP.
When the val… | column | megabps SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.43.1.10 |
| vRtrMplsLspAutoBWOverFlow The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow
samples that triggers an overflow auto-bandwidth adjustment attempt. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.11 |
| vRtrMplsLspAutoBWOvrFlwThreshold The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.12 |
| vRtrMplsLspAutoBWOvrFlwBW The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbp… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.13 |
| vRtrMplsLspAutoBWSampMultiplier The value of vRtrMplsLspAutoBWSampMultiplier specifies the multiplier
for collection intervals in a sample interval. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.14 |
| vRtrMplsLspAutoBWSampTime The value of vRtrMplsLspAutoBWSampTime indicates the sample multiplier
times the collection interval. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.15 |
| vRtrMplsLspAutoBWLastAdj The value of vRtrMplsLspAutoBWLastAdj indicates the system time for
the last auto-bandwidth adjustment. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.43.1.16 |
| vRtrMplsLspAutoBWLastAdjCause The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the
last auto-bandwidth adjustment. | column | TmnxMplsLspAutoBWLastAdjCause | .1.3.6.1.4.1.6527.3.1.2.6.43.1.17 |
| vRtrMplsLspAutoBWNextAdj The value of vRtrMplsLspAutoBWNextAdj indicates the system time when
then adjust-timer will expire. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.18 |
| vRtrMplsLspAutoBWMaxAvgRate The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average
data rate in any sample interval of the current adjust interval. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.19 |
| vRtrMplsLspAutoBWLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.43.1.2 |
| vRtrMplsLspAutoBWLastAvgRate The value of vRtrMplsLspAutoBWLastAvgRate indicates the average data
rate in the sample interval that ended most recently. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.20 |
| vRtrMplsLspAutoBWInheritance For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspAutoBWIn… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.21 |
| vRtrMplsLspAutoBWAdjTime The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multiplier
times the collection interval. | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.23 |
| vRtrMplsLspAutoBWOvrFlwCount The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of
overflow samples since the last reset. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.24 |
| vRtrMplsLspAutoBWSampCount The value of vRtrMplsLspAutoBWSampCount indicates the count in the
sample interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.25 |
| vRtrMplsLspAutoBWAdjCount The value of vRtrMplsLspAutoBWAdjCount indicates the count in the
adjust interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.26 |
| vRtrMplsLspAutoBWOperState The value of vRtrMplsLspAutoBWOperState indicates the operational
status for the LSP. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.6.43.1.27 |
| vRtrMplsLspAutoBWSampInterval The value of vRtrMplsLspAutoBWSampInterval indicates the number of
sample intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.28 |
| vRtrMplsLspAutoBWBeWeight The value of vRtrMplsLspAutoBWBeWeight specifies the weight in percent
for forwarding class 'BE' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.29 |
| vRtrMplsLspAutoBWAdjDNPercent The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expresse… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.3 |
| vRtrMplsLspAutoBWL2Weight The value of vRtrMplsLspAutoBWL2Weight specifies the weight in percent
for forwarding class 'L2' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.30 |
| vRtrMplsLspAutoBWAfWeight The value of vRtrMplsLspAutoBWAfWeight specifies the weight in percent
for forwarding class 'AF' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.31 |
| vRtrMplsLspAutoBWL1Weight The value of vRtrMplsLspAutoBWL1Weight specifies the weight in percent
for forwarding class 'L1' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.32 |
| vRtrMplsLspAutoBWH2Weight The value of vRtrMplsLspAutoBWH2Weight specifies the weight in percent
for forwarding class 'H2' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.33 |
| vRtrMplsLspAutoBWEfWeight The value of vRtrMplsLspAutoBWEfWeight specifies the weight in percent
for forwarding class 'EF' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.34 |
| vRtrMplsLspAutoBWH1Weight The value of vRtrMplsLspAutoBWH1Weight specifies the weight in percent
for forwarding class 'H1' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.35 |
| vRtrMplsLspAutoBWNcWeight The value of vRtrMplsLspAutoBWNcWeight specifies the weight in percent
for forwarding class 'NC' for the LSP. | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.36 |
| vRtrMplsLspAutoBWUnderFlow The value of vRtrMplsLspAutoBWUnderFlow specifies the number of
underflow samples that triggers an underflow auto-bandwidth adjustment
attempt. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.37 |
| vRtrMplsLspAutoBWUndFlwThreshold The value of vRtrMplsLspAutoBWUndFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.38 |
| vRtrMplsLspAutoBWUndFlwBW The value of vRtrMplsLspAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbp… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.39 |
| vRtrMplsLspAutoBWAdjDNMbps The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, express… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.4 |
| vRtrMplsLspAutoBWUndFlwCount The value of vRtrMplsLspAutoBWUndFlwCount indicates the number of
underflow samples since the last reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.40 |
| vRtrMplsLspAutoBWMaxUndFlwBw The value of vRtrMplsLspAutoBWMaxUndFlwBw indicates the maximum
sampled bandwidth in the most recent consecutive underflow samples. | column | megabps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.41 |
| vRtrMplsLspAutoBWUseLastAdjBW The value of vRtrMplsLspAutoBWUseLastAdjBW specifies whether use of
last adjusted bandwidth is enabled or diabled.
When the value is 'true' the use of last adjusted… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.43.1.42 |
| vRtrMplsLspAutoBWSecRetryLimit The value of vRtrMplsLspAutoBWSecRetryLimit specifies the max number
of retry attempts that will be made to signal the secondary path with
the last adjusted bandwidth. After the n… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.43 |
| vRtrMplsLspAutoBWLastAdjBW The value of vRtrMplsLspAutoBWLastAdjBW indicates the last adjusted
bandwidth for the LSP. A value of -1 indicates that this value is
invalid | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.44 |
| vRtrMplsLspAutoBWAdjMultiplier The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of
collection intervals in the adjust interval.
The default value is derived from vRtrMplsGeneralAu… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.5 |
| vRtrMplsLspAutoBWAdjUPPercent The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expresse… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.43.1.6 |
| vRtrMplsLspAutoBWAdjUPMbps The value of vRtrMplsLspAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, express… | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.7 |
| vRtrMplsLspAutoBWMaxBW The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.8 |
| vRtrMplsLspAutoBWMinBW The value of vRtrMplsLspAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP. | column | megabps TIMETRA-TC-MIBTmnxMplsLspBandwidth | .1.3.6.1.4.1.6527.3.1.2.6.43.1.9 |