tmnxDot3OamSdThresholdEvent
TIMETRA-DOT3-OAM-MIB ·
.1.3.6.1.4.1.6527.3.1.3.42.42.0.4
Object
notification
The tmnxDot3OamSdThresholdEvent notification is generated when a local
or remote threshold crossing event for signal degradation is detected.
A local SD threshold crossing event is detected by the local entity,
while a remote threshold crossing event is detected by the reception
of an Ethernet OAM Event Notification OAMPDU that indicates an SD
threshold event.
This notification will not be sent more than once per second.
The OAM entity can be derived from extracting the ifIndex from the
variable bindings. The objects in the notification correspond to the
values in a row instance in the tmnxDot3OamSdEventLogTable.
The management entity should periodically check
tmnxDot3OamSdEventLogTable to detect any missed events.
Context
- MIB
- TIMETRA-DOT3-OAM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.42.42.0.4- Type
- notification
- Status
- current
- Parent
- tmnxDot3OamNotifications
- Siblings
- 5
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot3OamPeerChanged The tmnxDot3OamPeerChanged notification is generated
when the peer information (specifically the Peer MAC address)
changes. Note that this notification will only be sent out
if t… | notification | - | .1.3.6.1.4.1.6527.3.1.3.42.42.0.1 |
| tmnxDot3OamLoopDetected The tmnxDot3OamLoopDetected notification is generated when a port
receives an 802.3ah PDU with a source MAC address that matches the MAC
address of that port. | notification | - | .1.3.6.1.4.1.6527.3.1.3.42.42.0.2 |
| tmnxDot3OamLoopCleared The tmnxDot3OamLoopCleared notification is generated when a port is no
longer receiving 802.3ah PDUs with a source MAC address that matches
the MAC address of that port. | notification | - | .1.3.6.1.4.1.6527.3.1.3.42.42.0.3 |
| tmnxDot3OamThresholdEventClr [CAUSE] The tmnxDot3OamThresholdEventClr notification is generated
when the local or remote signal failure (SF) threshold crossing event
is cleared on the port.
[EFFECT… | notification | - | .1.3.6.1.4.1.6527.3.1.3.42.42.0.5 |
| tmnxDot3OamNonThresholdEventClr [CAUSE] The tmnxDot3OamNonThresholdEventClr notification is generated
when the local or remote non-threshold crossing event
(DOT3-OAM-MIB::dot3OamNonThresholdEvent) is cleared on … | notification | - | .1.3.6.1.4.1.6527.3.1.3.42.42.0.6 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot3OamSdEventLogTimestamp The value of tmnxDot3OamSdEventLogTimestamp indicates the sysUpTime at
the time of the logged event. For locally generated events, the time
of the event can be accurately retrieve… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.2 |
| tmnxDot3OamSdEventLogOui The value of tmnxDot3OamSdEventLogOui indicates the Organizationally
Unique Identifier (OUI) of the entity defining the object type. All
IEEE 802.3 defined events (as appearing in… | column | DOT3-OAM-MIBEightOTwoOui | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.3 |
| tmnxDot3OamSdEventLogType The value of tmnxDot3OamSdEventLogType indicates the type of SD
threshold crossing event. When the OUI is the IEEE 802.3 OUI of
0x0180C2, the following event types are defined:
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.4 |
| tmnxDot3OamSdEventLogLocation The value of tmnxDot3OamSdEventLogLocation indicates the location
where the SD event occurred.
Code point descriptions:
local (1) - event occurred locally
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.5 |
| tmnxDot3OamSdEventLogWindowHi The value of tmnxDot3OamSdEventLogWindowHi indicates the most
significant four bytes of the unsigned 64-bit window over which the
value was measured for the SD threshold crossing … | column | 2^32 deciseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.6 |
| tmnxDot3OamSdEventLogWindowLo The value of tmnxDot3OamSdEventLogWindowLo indicates the least
significant four bytes of the unsigned 64-bit window over which the
value was measured for the SD threshold crossing… | column | deciseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.7 |
| tmnxDot3OamSdEventLogThresholdHi The value of tmnxDot3OamSdEventLogThresholdHi indicates the most
significant four bytes of the unsigned 64-bit threshold over which the
value was measured for the SD threshold cro… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.8 |
| tmnxDot3OamSdEventLogThresholdLo The value of tmnxDot3OamSdEventLogThresholdLo indicates the least
significant four bytes of the unsigned 64-bit threshold over which the
value was measured for the SD threshold cr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.9 |
| tmnxDot3OamSdEventLogValue The value of tmnxDot3OamSdEventLogValue indicates the value of the
parameter within the given window that generated this event. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.10 |
| tmnxDot3OamSdEventLogRunTotal The value of tmnxDot3OamSdEventLogRunTotal indicates the running total
of the number of times this SD threshold crossing event has occurred
since the last reset. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.11 |
| tmnxDot3OamSdEventLogEventTotal The value of tmnxDot3OamSdEventLogEventTotal indicates the total
number of times an Event Notification for this SD threshold crossing
event has been transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.12 |
| tmnxDot3OamSdEventLogCleared The value of tmnxDot3OamSdEventLogCleared indicates whether or not
this SD threshold crossing event has been cleared. If this object's
value is 'true (1)', this event is no longer… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.42.5.4.1.13 |