controlTrapDelay
TELESTE-COMMON-MIB ·
.1.3.6.1.4.1.3715.99.1.3.11
Object
scalar
optional
r/w
Integer32
The time before a trap is sent after an alarm
is detected.
- Unit 10 ms
- Minimum value 10 (100 ms)
- Maximum value 6000 (60 seconds)
- Default value 500 (5 seconds)
This parameter can be used to control alarm storms e.g.
in an amplifier cascade by using a different value in
each amplifier.
Context
- MIB
- TELESTE-COMMON-MIB
- OID
.1.3.6.1.4.1.3715.99.1.3.11- Type
- scalar
- Access
- readwrite
- Status
- optional
- Parent
- elementControl
- Siblings
- 10
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| controlResetElement mandatory On write requests this object commands the module to
reset itself.
If softReset(3) or hardReset(2) can not be performed,
then BAD VALUE error is returned.
O… | scalar | Enumeration | .1.3.6.1.4.1.3715.99.1.3.1 |
| controlAlarmOffDelay optional The minimum time an alarm/warning entry stays active after
the object has reached it's normal condition. Common to all
alarms/warnings.
- Unit 10 ms
- Minimum value 10 (100 ms)
- … | scalar | Integer32 | .1.3.6.1.4.1.3715.99.1.3.10 |
| controlBusMasterAdminState optional This object tells whether the element is configured as
a bus master or not. Only relevant for bus master type
of elements. Others return no(2). | scalar | Enumeration | .1.3.6.1.4.1.3715.99.1.3.2 |
| controlAlarmDetection mandatory This variable is used to disable or enable the element
alarm checking. When disabled(1), the element
will not check any alarms (or send traps).
Default value is enabled(2).
… | scalar | Enumeration | .1.3.6.1.4.1.3715.99.1.3.3 |
| controlMaxNumberTrapReceivers mandatory Number of entries in the elementTrapReceiverTable.
At least one trap entry must be supported. | scalar | Integer32 | .1.3.6.1.4.1.3715.99.1.3.4 |
| controlTrapReceiverTable optional A table of manager trap receiver addresses, ports and
communities. Total number of entries can not exceed
elementNumberTrapReceivers. An entry is deleted from this
table by setti… | table | - | .1.3.6.1.4.1.3715.99.1.3.5 |
| controlTrapSending optional Enables/disables trap sending.
1 = traps enabled
2 = traps disabled | scalar | Enumeration | .1.3.6.1.4.1.3715.99.1.3.6 |
| controlTrapInterval optional The minimum interval between traps.
- Unit 10 milliseconds
- Minimum value 0 (send as fast as possible)
- Maximum value 1000 (10 seconds)
- Default value is 100 (1 second) | scalar | Integer32 | .1.3.6.1.4.1.3715.99.1.3.7 |
| controlTrapLifeTime optional The maximum time a trap stays in the trap queue waiting
for sending.
- Unit 1 second.
- Minimum value 10
- Maximum value 300
- Default value 60 | scalar | Integer32 | .1.3.6.1.4.1.3715.99.1.3.8 |
| controlAlarmOnDelay optional The minimum time an object's alarm/warning condition must
exist before it is recorded as an alarm/warning. Common
to all alarms/warnings
- Unit 10 ms
- Minimum value 10 (100 ms)
-… | scalar | Integer32 | .1.3.6.1.4.1.3715.99.1.3.9 |