tePathOperStatus
TE-MIB ·
.1.3.6.1.2.1.122.1.3.1.14
Object
column
Enumeration
The operational status of the path: unknown: down: Signaling failed. testing: Administratively set aside for testing. dormant: Not signaled (for a backup tunnel). ready: Signaled but not yet carrying traffic. operational: Signaled and carrying traffic.
Context
- MIB
- TE-MIB
- OID
.1.3.6.1.2.1.122.1.3.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tePathEntry
- Table
- tePathTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | down |
2 | testing |
3 | dormant |
4 | ready |
5 | operational |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tePathIndex An index that uniquely identifies a path within
a Tunnel.
The combination of <teTunnelIndex, tePathIndex> thus
uniquely identifies a path among all paths on this
ro… | column | Unsigned32 | .1.3.6.1.2.1.122.1.3.1.1 |
| tePathExclude This is a configured set of administrative groups
specified as a bit vector (i.e., bit n is 1 if group
n is in the set, where n = 0 is the LSB). For each
link that this path goes… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.10 |
| tePathSetupPriority The setup priority configured for this path, with 0
as the highest priority and 7 as the lowest. | column | Integer32 | .1.3.6.1.2.1.122.1.3.1.11 |
| tePathHoldPriority The hold priority configured for this path, with 0
as the highest priority and 7 as the lowest. | column | Integer32 | .1.3.6.1.2.1.122.1.3.1.12 |
| tePathProperties The set of configured properties for this path,
expressed as a bit map. For example, if the path
supports 'make before break', then bit 2 is set. | column | Bits | .1.3.6.1.2.1.122.1.3.1.13 |
| tePathAdminStatus The operational status of the path:
normal: Used normally for forwarding.
testing: Administratively set aside for testing. | column | Enumeration | .1.3.6.1.2.1.122.1.3.1.15 |
| tePathComputedRoute The route computed for this path, perhaps using
some form of Constraint-based Routing. The
algorithm is implementation dependent.
This object returns the computed … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.16 |
| tePathRecordedRoute The route actually used for this path, as recorded
by the signaling protocol. This is again an ordered
list of hops; each hop is expected to be strict.
The value o… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.17 |
| tePathName The name of this path.
A pathName must be unique within the set of paths
over a single tunnel. If a SET request is received
with a duplicate name, then the impleme… | column | OctetString | .1.3.6.1.2.1.122.1.3.1.2 |
| tePathRowStatus The status of this conceptual row.
When the value of this object is 'active', then
the value of tePathName cannot be changed. All
other writable objects may be cha… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.122.1.3.1.3 |
| tePathStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need
not allow write-access to any columnar objects
in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.122.1.3.1.4 |
| tePathType The type for this PathEntry; i.e., whether this path
is a primary path, a standby path, or a secondary
path. | column | Enumeration | .1.3.6.1.2.1.122.1.3.1.5 |
| tePathConfiguredRoute The route that this TE path is configured to follow;
i.e., an ordered list of hops. The value of this
object gives the primary index into the Hop Table.
The secondary index is th… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.6 |
| tePathBandwidth The configured bandwidth for this Tunnel,
in units of thousands of bits per second (Kbps). | column | Kilobits per second MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.2.1.122.1.3.1.7 |
| tePathIncludeAny This is a configured set of administrative groups
specified as a bit vector (i.e., bit n is 1 if group
n is in the set, where n = 0 is the LSB). For each
link that… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.8 |
| tePathIncludeAll This is a configured set of administrative groups
specified as a bit vector (i.e., bit n is 1 if group
n is in the set, where n = 0 is the LSB). For each
link that this path goes… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.122.1.3.1.9 |