tePathIndex

TE-MIB · .1.3.6.1.2.1.122.1.3.1.1

MIB view Table view

Object

column Unsigned32

An index that uniquely identifies a path within
a Tunnel.
              
The combination of <teTunnelIndex, tePathIndex> thus
uniquely identifies a path among all paths on this
router.

Context

MIB: TE-MIB
OID: .1.3.6.1.2.1.122.1.3.1.1
Type: column
Access: noaccess
Status: current
Parent: tePathEntry
Table: tePathTable
Siblings: 16

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 1-4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tePathExclude This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n = 0 is the LSB). For each link that this path goes…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.10`
tePathSetupPriority The setup priority configured for this path, with 0 as the highest priority and 7 as the lowest.	column	Integer32	`.1.3.6.1.2.1.122.1.3.1.11`
tePathHoldPriority The hold priority configured for this path, with 0 as the highest priority and 7 as the lowest.	column	Integer32	`.1.3.6.1.2.1.122.1.3.1.12`
tePathProperties The set of configured properties for this path, expressed as a bit map. For example, if the path supports 'make before break', then bit 2 is set.	column	Bits	`.1.3.6.1.2.1.122.1.3.1.13`
tePathOperStatus The operational status of the path: unknown: down: Signaling failed. testing: Administratively set aside for testing. dormant: Not signaled (for a backup tunnel). r…	column	Enumeration	`.1.3.6.1.2.1.122.1.3.1.14`
tePathAdminStatus The operational status of the path: normal: Used normally for forwarding. testing: Administratively set aside for testing.	column	Enumeration	`.1.3.6.1.2.1.122.1.3.1.15`
tePathComputedRoute The route computed for this path, perhaps using some form of Constraint-based Routing. The algorithm is implementation dependent. This object returns the computed …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.16`
tePathRecordedRoute The route actually used for this path, as recorded by the signaling protocol. This is again an ordered list of hops; each hop is expected to be strict. The value o…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.17`
tePathName The name of this path. A pathName must be unique within the set of paths over a single tunnel. If a SET request is received with a duplicate name, then the impleme…	column	OctetString	`.1.3.6.1.2.1.122.1.3.1.2`
tePathRowStatus The status of this conceptual row. When the value of this object is 'active', then the value of tePathName cannot be changed. All other writable objects may be cha…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.122.1.3.1.3`
tePathStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.2.1.122.1.3.1.4`
tePathType The type for this PathEntry; i.e., whether this path is a primary path, a standby path, or a secondary path.	column	Enumeration	`.1.3.6.1.2.1.122.1.3.1.5`
tePathConfiguredRoute The route that this TE path is configured to follow; i.e., an ordered list of hops. The value of this object gives the primary index into the Hop Table. The secondary index is th…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.6`
tePathBandwidth The configured bandwidth for this Tunnel, in units of thousands of bits per second (Kbps).	column	Kilobits per second MPLS-TC-STD-MIBMplsBitRate	`.1.3.6.1.2.1.122.1.3.1.7`
tePathIncludeAny This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n = 0 is the LSB). For each link that…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.8`
tePathIncludeAll This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n = 0 is the LSB). For each link that this path goes…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.122.1.3.1.9`