s3AgentType
SYNOPTICS-COMMON-MIB ·
.1.3.6.1.4.1.45.1.2.1.1
Object
scalar
mandatory
Enumeration
The 3000 series agent's Module type.
Context
- MIB
- SYNOPTICS-COMMON-MIB
- OID
.1.3.6.1.4.1.45.1.2.1.1- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- s3AgentSw
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | m3313 |
3 | m3313M |
4 | m3314-ST |
5 | m3314M-ST |
6 | m2310 |
7 | m3512 |
8 | m3514 |
9 | m332x |
10 | m3356 |
11 | m332xS |
12 | m3910S |
13 | m3395 |
14 | m3394 |
15 | m3513 |
16 | m331xS |
17 | m291x |
18 | m271x |
19 | m281x |
20 | m331xA |
21 | m3522 |
22 | m2722 |
23 | m281xSA |
24 | m810M |
25 | m351xSA |
26 | m331xSA |
27 | m271xSA |
28 | m2486 |
29 | m2300x |
30 | m2310x |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s3AgentFeatureLevel obsolete Used to determine feature level of the agent.
The encoding of this object is of the following
form: xyy, where x is the major version
number and yy is the minor version number. … | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.10 |
| s3AgentMySlotId mandatory Slot where this agent currently resides. If
hardware is unable to determine then a 0 should
be returned. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.11 |
| s3AgentUnAuthIp mandatory This object contains the IP address of the last
station that tried to access this agent with an
invalid community string. This object is used
as a VarBind in an Authentication Tr… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.45.1.2.1.12 |
| s3AgentUnAuthComm mandatory This object contains the community string of the
last unauthenticated attempt to access this agent.
This object is used as a VarBind in an Authentication
Trap PDU. A get request … | scalar | OctetString | .1.3.6.1.4.1.45.1.2.1.13 |
| s3AgentSwLicenseCode mandatory The software license code assigned to this agent.
This code is required for initializing the agent.
The code consists of exactly eight printable
characters. | scalar | OctetString | .1.3.6.1.4.1.45.1.2.1.14 |
| s3AgentPerformance mandatory This counts the CPU idle time of the agent
in units of 10 microseconds. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.45.1.2.1.15 |
| s3AgentSwMaintVer mandatory The agent software maintenance version number
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.16 |
| s3AgentConfigLoadMode mandatory This indicates whether the agent should get
configuration data from the network, use the local
configuration data, or try the network first and then
fall back to local configurati… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.17 |
| s3AgentConfigActualSource mandatory This indicates whether the agent loaded configuration
data from the network or used the local configuration
data. | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.18 |
| s3AgentMgmtProtoMode mandatory This indicates from which network transports over
which the agent will accept SNMP requests. This object
only applies to agents with IP and IPX dual stack support.
Thi… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.19 |
| s3AgentFwVer mandatory The agent's module firmware version
0=Rev A,1=Rev B,etc. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.2 |
| s3AgentActualMgmtProtocol mandatory This indicates which network transports over which
the agent will currently accept SNMP requests. | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.20 |
| s3AgentImageFile mandatory The name of the agent image file that the NMM loads
at boot time.
This parameter will not take effect until written to
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentR… | scalar | OctetString | .1.3.6.1.4.1.45.1.2.1.21 |
| s3AgentSwMajorVer mandatory The agent major software version number.
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.3 |
| s3AgentSwMinorVer mandatory The agent minor software version number
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal. | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.4 |
| s3AgentBootProtocol mandatory Boot protocol used to load the module with its software.
On Agents with the Local Load option the value return by
this object is valid only if the MIB object
s3LocImageLoadMode is… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.5 |
| s3AgentBootFile mandatory The name of the boot file that is sent to the file
server during boot time. The actual boot protocol
used to retrieve the file is determined by
s3AgentBootProtocol.
T… | scalar | OctetString | .1.3.6.1.4.1.45.1.2.1.6 |
| s3AgentAuthTrap obsolete Enable or disable the use of authentication error
trap generation.
This parameter will take effect only after a restart
(s3AgentRestart) is issued. This parameter will… | scalar | Enumeration | .1.3.6.1.4.1.45.1.2.1.7 |
| s3AgentLocation obsolete This is a informational string that could be used
to show the physical location (i.e. area) of the
NMM or concentrator.
This parameter will take effect only after a res… | scalar | OctetString | .1.3.6.1.4.1.45.1.2.1.8 |
| s3AgentMibLevel mandatory Used to determine current MIB release supported
by agent. The encoding of this object is of the
following form: xyy, where x is the major version
number and yy is the minor versi… | scalar | Integer32 | .1.3.6.1.4.1.45.1.2.1.9 |