s3AgentMibLevel

SYNOPTICS-COMMON-MIB · .1.3.6.1.4.1.45.1.2.1.9
MIB view Table view

Object

scalar mandatory Integer32 
Used to determine current MIB release supported
by agent.  The encoding of this object is of the
following form: xyy, where x is the major version
number and yy is the minor version number.  Thus,
version 3.0 would be represented as 300,  version
3.01 would be 301 and 3.1 would be 310.  Object is
in decimal.  Values that correspond to each agent
type and version are specified in the other
SynOptics documentation.

Context

MIB
SYNOPTICS-COMMON-MIB
OID
.1.3.6.1.4.1.45.1.2.1.9
Type
scalar
Access
readonly
Status
mandatory
Parent
s3AgentSw
Siblings
20

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
s3AgentType mandatory
The 3000 series agent's Module type.
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.1
s3AgentFeatureLevel obsolete
Used to determine feature level of the agent. The encoding of this object is of the following form: xyy, where x is the major version number and yy is the minor version number. …
scalarInteger32.1.3.6.1.4.1.45.1.2.1.10
s3AgentMySlotId mandatory
Slot where this agent currently resides. If hardware is unable to determine then a 0 should be returned.
scalarInteger32.1.3.6.1.4.1.45.1.2.1.11
s3AgentUnAuthIp mandatory
This object contains the IP address of the last station that tried to access this agent with an invalid community string. This object is used as a VarBind in an Authentication Tr…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.45.1.2.1.12
s3AgentUnAuthComm mandatory
This object contains the community string of the last unauthenticated attempt to access this agent. This object is used as a VarBind in an Authentication Trap PDU. A get request …
scalarOctetString.1.3.6.1.4.1.45.1.2.1.13
s3AgentSwLicenseCode mandatory
The software license code assigned to this agent. This code is required for initializing the agent. The code consists of exactly eight printable characters.
scalarOctetString.1.3.6.1.4.1.45.1.2.1.14
s3AgentPerformance mandatory
This counts the CPU idle time of the agent in units of 10 microseconds.
scalarRFC1155-SMICounter.1.3.6.1.4.1.45.1.2.1.15
s3AgentSwMaintVer mandatory
The agent software maintenance version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal.
scalarInteger32.1.3.6.1.4.1.45.1.2.1.16
s3AgentConfigLoadMode mandatory
This indicates whether the agent should get configuration data from the network, use the local configuration data, or try the network first and then fall back to local configurati…
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.17
s3AgentConfigActualSource mandatory
This indicates whether the agent loaded configuration data from the network or used the local configuration data.
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.18
s3AgentMgmtProtoMode mandatory
This indicates from which network transports over which the agent will accept SNMP requests. This object only applies to agents with IP and IPX dual stack support. Thi…
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.19
s3AgentFwVer mandatory
The agent's module firmware version 0=Rev A,1=Rev B,etc.
scalarInteger32.1.3.6.1.4.1.45.1.2.1.2
s3AgentActualMgmtProtocol mandatory
This indicates which network transports over which the agent will currently accept SNMP requests.
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.20
s3AgentImageFile mandatory
The name of the agent image file that the NMM loads at boot time. This parameter will not take effect until written to EEPROM (s3AgentWriteEeprom) and a reset (s3AgentR…
scalarOctetString.1.3.6.1.4.1.45.1.2.1.21
s3AgentSwMajorVer mandatory
The agent major software version number. (version is specified as major.minor.maint or 3.0.1). Object is in decimal.
scalarInteger32.1.3.6.1.4.1.45.1.2.1.3
s3AgentSwMinorVer mandatory
The agent minor software version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal.
scalarInteger32.1.3.6.1.4.1.45.1.2.1.4
s3AgentBootProtocol mandatory
Boot protocol used to load the module with its software. On Agents with the Local Load option the value return by this object is valid only if the MIB object s3LocImageLoadMode is…
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.5
s3AgentBootFile mandatory
The name of the boot file that is sent to the file server during boot time. The actual boot protocol used to retrieve the file is determined by s3AgentBootProtocol. T…
scalarOctetString.1.3.6.1.4.1.45.1.2.1.6
s3AgentAuthTrap obsolete
Enable or disable the use of authentication error trap generation. This parameter will take effect only after a restart (s3AgentRestart) is issued. This parameter will…
scalarEnumeration.1.3.6.1.4.1.45.1.2.1.7
s3AgentLocation obsolete
This is a informational string that could be used to show the physical location (i.e. area) of the NMM or concentrator. This parameter will take effect only after a res…
scalarOctetString.1.3.6.1.4.1.45.1.2.1.8