inlet3PhaseBalance

SYNLINK-MIB · .1.3.6.1.4.1.21728.4.2.1.1.9
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Percentage of imbalance in 3 phase inlet. Calculated with largest difference of any 2 lines, divided by average current. All times 100.

Context

MIB
SYNLINK-MIB
OID
.1.3.6.1.4.1.21728.4.2.1.1.9
Type
column
Access
readonly
Status
current
Parent
inletEntry
Table
inletTable
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
inletIndex
Which number inlet it is.
columnInteger32.1.3.6.1.4.1.21728.4.2.1.1.1
inletLine1CurrentRms
Line 1 of 3 phase inlet Current RMS in Amperes
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.10
inletLine2CurrentRms
Line 2 of 3 phase inlet Current RMS in Amperes
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.11
inletLine3CurrentRms
Line 3 of 3 phase inlet Current RMS in Amperes
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.12
inletLineConfiguration
Applies only to single phase. Options are L-L, L-N, or L-L\N
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.13
inletActivePower
Inlet Active Power in watts
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.14
inletApparentPower
Inlet Apparent Power in Volt-amperes (VA)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.15
inletReactivePower
Inlet Reactive Power in Volt-Amps-Reactive (VAR)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.16
inletCurrentRms
Inlet current draw in amps
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.17
inletLineFrequency
Inlet line frequency in hertz
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.18
inletVoltageRms
Inlet voltage RMS in volts
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.19
inletType
Describes which type of setup the inlet is part of. Single for one input plug. Double for two simultaneously used input plugs. ATS (Auto Transfer Switch) for 2 inputs with primary…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.2
atsActiveInlet
If inputType is 'ats' then this value will be true if it is the currently used inlet. False if the inlet is not in use.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21728.4.2.1.1.20
atsInletId
Should be A (primary) or B (secondary) for two ATS inputs
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.21
atsInletReady
Whether the Inlet is ready to be used as a power source
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21728.4.2.1.1.22
inletPlug
The type of Inlet Plug Connector.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.3
inletName
User defined name for Inlet
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.4
inletEnergyAccumulation
kWH value to show energy consumption for inlet plug
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.5
inletPowerFactor
Power factor value for inlet plug
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21728.4.2.1.1.6
inletPhase
Possibilities are: Single Phase, 3 Phase Delta, or 3 Phase Wye
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.7
inletUuid
Unique identifier for Inlet
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21728.4.2.1.1.8