atsInletReady
SYNLINK-MIB ·
.1.3.6.1.4.1.21728.4.2.1.1.22
Object
column
SNMPv2-TCTruthValue
Whether the Inlet is ready to be used as a power source
Context
- MIB
- SYNLINK-MIB
- OID
.1.3.6.1.4.1.21728.4.2.1.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- inletEntry
- Table
- inletTable
- Siblings
- 21
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| inletIndex Which number inlet it is. | column | Integer32 | .1.3.6.1.4.1.21728.4.2.1.1.1 |
| inletLine1CurrentRms Line 1 of 3 phase inlet Current RMS in Amperes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.10 |
| inletLine2CurrentRms Line 2 of 3 phase inlet Current RMS in Amperes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.11 |
| inletLine3CurrentRms Line 3 of 3 phase inlet Current RMS in Amperes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.12 |
| inletLineConfiguration Applies only to single phase. Options are L-L, L-N, or L-L\N | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.13 |
| inletActivePower Inlet Active Power in watts | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.14 |
| inletApparentPower Inlet Apparent Power in Volt-amperes (VA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.15 |
| inletReactivePower Inlet Reactive Power in Volt-Amps-Reactive (VAR) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.16 |
| inletCurrentRms Inlet current draw in amps | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.17 |
| inletLineFrequency Inlet line frequency in hertz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.18 |
| inletVoltageRms Inlet voltage RMS in volts | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.19 |
| inletType Describes which type of setup the inlet is part of. Single for one input plug. Double for two simultaneously used input plugs. ATS (Auto Transfer Switch) for 2 inputs with primary… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.2 |
| atsActiveInlet If inputType is 'ats' then this value will be true if it is the currently used inlet. False if the inlet is not in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21728.4.2.1.1.20 |
| atsInletId Should be A (primary) or B (secondary) for two ATS inputs | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.21 |
| inletPlug The type of Inlet Plug Connector. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.3 |
| inletName User defined name for Inlet | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.4 |
| inletEnergyAccumulation kWH value to show energy consumption for inlet plug | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.5 |
| inletPowerFactor Power factor value for inlet plug | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.6 |
| inletPhase Possibilities are: Single Phase, 3 Phase Delta, or 3 Phase Wye | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.7 |
| inletUuid Unique identifier for Inlet | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21728.4.2.1.1.8 |
| inlet3PhaseBalance Percentage of imbalance in 3 phase inlet. Calculated with largest difference of any 2 lines, divided by average current. All times 100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21728.4.2.1.1.9 |