rcMstpPortAdminStp
SWITCH-MSTP-MIB ·
.1.3.6.1.4.1.8886.6.1.24.3.1.5
Object
Ports with this object set as false(2) do not participate in any STP computation; they are always in Forwarding state, do not send any BPDU and all BPDUs received on these Ports will be discarded. Such ports are used to define the STP termination point of the LAN.
Context
- MIB
- SWITCH-MSTP-MIB
- OID
.1.3.6.1.4.1.8886.6.1.24.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcMstpPortEntry
- Table
- rcMstpPortTable
- Siblings
- 19
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMstpPortIndex A unique value, greater than zero, for each Port. The value for
each interface sub-layer must remain constant at least from one
re-initialization of the entity's network managem… | column | Integer32 | .1.3.6.1.4.1.8886.6.1.24.3.1.1 |
| rcMstpPortRxRstBpduCounter Received RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.10 |
| rcMstpPortRxMstBpduCounter Received MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.11 |
| rcMstpPortTxTcnBpduCounter Transmitted Topology Change Notification (TCN) Messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.12 |
| rcMstpPortTxCfgBpduCounter Transmitted Configuration BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.13 |
| rcMstpPortTxRstBpduCounter Transmitted RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.14 |
| rcMstpPortTxMstBpduCounter Transmitted MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.15 |
| rcMstpPortStatisticsClear Clear port statistics. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.16 |
| rcMstpPortLoopGuard Port mstp loop protect enable status. If a port in some instance did not
received any bpdu in three times of hello-time, it will age and reselect.
If there was no link fault in t… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.17 |
| rcMstpBpduFilterEnable Bpdu filter status on edge port, when it is enabled,the edge port drop the received bpdu packets,
and does not send any bpdu packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.18 |
| rcMstpPortBpduGuardEnable Bpdu guard enable status on edge port. If enabled, port will shutdown when it receive
stp bpdu packet | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.19 |
| rcMstpPortAdminMACEnable The enabled/disabled status of the port.
Set TRUE(1) ,the stp status of the port will be enabled,
otherwise it will be disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.2 |
| rcMstpPortBpduGuardStatus Indicate whether the port was shutdown due to bpdu guard，set it
to no will up the port. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.20 |
| rcMstpPortOperMACEnable The enabled/disabled status of the port.
The value of TRUE(1) means the stp status of the port is
enabled, otherwise it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.3 |
| rcMstpPortAdminEdgePort The administrative edged port status of this port.
A value of forceTrue(0) indicates that this port should
always be treated as edged port.
A value of forceFalse(1) indicates… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.4 |
| rcMstpPortOperStp port mstp enable operate status | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.6 |
| rcMstpPortRootGuard port mstp rootport protect enable status | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.7 |
| rcMstpPortRxTcnBpduCounter Received Topology Change Notification (TCN) Messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.8 |
| rcMstpPortRxCfgBpduCounter Received Configuration BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.9 |