rcMstpPortAdminEdgePort
SWITCH-MSTP-MIB ·
.1.3.6.1.4.1.8886.6.1.24.3.1.4
Object
column
r/w
Enumeration
The administrative edged port status of this port. A value of forceTrue(0) indicates that this port should always be treated as edged port. A value of forceFalse(1) indicates that this port should not be treated as edged port. A value of auto(2) indicates that this port is considered to be an edged port if MSTP detect that this port is connected to the terminals.
Context
- MIB
- SWITCH-MSTP-MIB
- OID
.1.3.6.1.4.1.8886.6.1.24.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcMstpPortEntry
- Table
- rcMstpPortTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | forceTrue |
1 | forceFalse |
2 | auto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMstpPortIndex A unique value, greater than zero, for each Port. The value for
each interface sub-layer must remain constant at least from one
re-initialization of the entity's network managem… | column | Integer32 | .1.3.6.1.4.1.8886.6.1.24.3.1.1 |
| rcMstpPortRxRstBpduCounter Received RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.10 |
| rcMstpPortRxMstBpduCounter Received MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.11 |
| rcMstpPortTxTcnBpduCounter Transmitted Topology Change Notification (TCN) Messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.12 |
| rcMstpPortTxCfgBpduCounter Transmitted Configuration BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.13 |
| rcMstpPortTxRstBpduCounter Transmitted RST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.14 |
| rcMstpPortTxMstBpduCounter Transmitted MST BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.15 |
| rcMstpPortStatisticsClear Clear port statistics. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.16 |
| rcMstpPortLoopGuard Port mstp loop protect enable status. If a port in some instance did not
received any bpdu in three times of hello-time, it will age and reselect.
If there was no link fault in t… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.17 |
| rcMstpBpduFilterEnable Bpdu filter status on edge port, when it is enabled,the edge port drop the received bpdu packets,
and does not send any bpdu packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.18 |
| rcMstpPortBpduGuardEnable Bpdu guard enable status on edge port. If enabled, port will shutdown when it receive
stp bpdu packet | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.19 |
| rcMstpPortAdminMACEnable The enabled/disabled status of the port.
Set TRUE(1) ,the stp status of the port will be enabled,
otherwise it will be disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.2 |
| rcMstpPortBpduGuardStatus Indicate whether the port was shutdown due to bpdu guard，set it
to no will up the port. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.20 |
| rcMstpPortOperMACEnable The enabled/disabled status of the port.
The value of TRUE(1) means the stp status of the port is
enabled, otherwise it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.3 |
| rcMstpPortAdminStp Ports with this object set as false(2) do not participate in
any STP computation; they are always in Forwarding state, do not
send any BPDU and all BPDUs received on these Ports… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.3.1.5 |
| rcMstpPortOperStp port mstp enable operate status | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.6 |
| rcMstpPortRootGuard port mstp rootport protect enable status | column | Enumeration | .1.3.6.1.4.1.8886.6.1.24.3.1.7 |
| rcMstpPortRxTcnBpduCounter Received Topology Change Notification (TCN) Messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.8 |
| rcMstpPortRxCfgBpduCounter Received Configuration BPDUs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.24.3.1.9 |