rcMstpBridgeProtocolVersion
SWITCH-MSTP-MIB ·
.1.3.6.1.4.1.8886.6.1.24.2.4
Object
scalar
r/w
Enumeration
This object is relevant if the Bridges can supply a number of versions of STP. For GET operation this object reflects the mode in which the Bridge works currently. If the Bridge works currently in the version, not listed here, the value unknown(15) should be returned. For SET operation the value unknown(15), forceNonStp(0) and forceDot1w(2) must be rejected. Another value may be rejected too if the Bridge does not support correspond mode (see rcMstpBridgeVersionSupported).
Context
- MIB
- SWITCH-MSTP-MIB
- OID
.1.3.6.1.4.1.8886.6.1.24.2.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcMstpBridge
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | forceNonStp |
1 | forceLegacyDot1d |
2 | forceDot1w |
3 | autoDot1s |
15 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMstpBridgeAdminStp The administrative value of the bridge.
A value of TRUE(1) indicates the bridge should enable stp.
A value of FALSE(2) indicates the bridge should disable stp. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.2.1 |
| rcMstpBridgeRegionDigest The Configuration Digest derived from MST Configuration Table. | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.10 |
| rcMstpBridgeCistRoot The Bridge Identifier of the current CIST Root. | scalar | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.8886.6.1.24.2.11 |
| rcMstpBridgeCistExternalRootCost The CIST path cost from the bridge to the CIST Root. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.24.2.12 |
| rcMstpBridgeDiameter For diameter, specify the maximum number of switches
between any two end stations, only for CIST. | scalar | Unsigned32 | .1.3.6.1.4.1.8886.6.1.24.2.13 |
| rcMstpBridgeRegionEditBufferOperation Indicates the operation that is performed on the Region
Config Edit Buffer.
other(1) -- none of the following operation.
active(2) -- commit changes in the Edit Buffer… | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.24.2.14 |
| rcMstpBridgeMaxHops The maximum number of hops for a particular Spanning Tree
instance. It defines the initial value of remainingHops
for MSTI information generated at the boundary of an
MSTI re… | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.2 |
| rcMstpBridgeVersionSupported An indication of which Spanning Tree Protocol the Bridge supports .
The bit nonStp(0) indicates, the Bridge doesn't support
any Spanning Tree Protocol. The bit 'dot1d1998(1)' in… | scalar | Bits | .1.3.6.1.4.1.8886.6.1.24.2.3 |
| rcMstpBridgeRegionFormatSelector The format selector value of the Configuration Identifier.
This has a value of 0 to indicate the format specified in
the IEEE 802.1s standard. Other number is not accepted. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.5 |
| rcMstpBridgeRegionName The region name identifies the MST region and is used as
one of the inputs in the computation of the MST Identifier. | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.6 |
| rcMstpBridgeRegionEditName Set region name, the inputs will be actived after active
operation.
The region name identifies the MST region and is used
as one of the inputs in the computation of the MS… | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.7 |
| rcMstpBridgeRegionRevLevel This object identifies the MST revision that identifies the
MST region and is used as one of the inputs in the computation
of the MST configuration Identifier. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.8 |
| rcMstpBridgeRegionEditRevLevel Set revision level, the inputs will be actived after active
operation.
This object identifies the MST revision that identifies the
MST region and is used as one of the inp… | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.9 |