rcMstpBridgeMaxHops
SWITCH-MSTP-MIB ·
.1.3.6.1.4.1.8886.6.1.24.2.2
Object
scalar
r/w
Integer32
The maximum number of hops for a particular Spanning Tree instance. It defines the initial value of remainingHops for MSTI information generated at the boundary of an MSTI region. This value is used only if this bridge is the CIST Regional Root and/or the MSTI Regional Root for one or more Multiple Spanning Tree instances.
Context
- MIB
- SWITCH-MSTP-MIB
- OID
.1.3.6.1.4.1.8886.6.1.24.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcMstpBridge
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-40
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMstpBridgeAdminStp The administrative value of the bridge.
A value of TRUE(1) indicates the bridge should enable stp.
A value of FALSE(2) indicates the bridge should disable stp. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.24.2.1 |
| rcMstpBridgeRegionDigest The Configuration Digest derived from MST Configuration Table. | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.10 |
| rcMstpBridgeCistRoot The Bridge Identifier of the current CIST Root. | scalar | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.8886.6.1.24.2.11 |
| rcMstpBridgeCistExternalRootCost The CIST path cost from the bridge to the CIST Root. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.24.2.12 |
| rcMstpBridgeDiameter For diameter, specify the maximum number of switches
between any two end stations, only for CIST. | scalar | Unsigned32 | .1.3.6.1.4.1.8886.6.1.24.2.13 |
| rcMstpBridgeRegionEditBufferOperation Indicates the operation that is performed on the Region
Config Edit Buffer.
other(1) -- none of the following operation.
active(2) -- commit changes in the Edit Buffer… | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.24.2.14 |
| rcMstpBridgeVersionSupported An indication of which Spanning Tree Protocol the Bridge supports .
The bit nonStp(0) indicates, the Bridge doesn't support
any Spanning Tree Protocol. The bit 'dot1d1998(1)' in… | scalar | Bits | .1.3.6.1.4.1.8886.6.1.24.2.3 |
| rcMstpBridgeProtocolVersion This object is relevant if the Bridges can supply a number
of versions of STP.
For GET operation this object reflects the mode in which
the Bridge works currently. If the Bridg… | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.24.2.4 |
| rcMstpBridgeRegionFormatSelector The format selector value of the Configuration Identifier.
This has a value of 0 to indicate the format specified in
the IEEE 802.1s standard. Other number is not accepted. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.5 |
| rcMstpBridgeRegionName The region name identifies the MST region and is used as
one of the inputs in the computation of the MST Identifier. | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.6 |
| rcMstpBridgeRegionEditName Set region name, the inputs will be actived after active
operation.
The region name identifies the MST region and is used
as one of the inputs in the computation of the MS… | scalar | OctetString | .1.3.6.1.4.1.8886.6.1.24.2.7 |
| rcMstpBridgeRegionRevLevel This object identifies the MST revision that identifies the
MST region and is used as one of the inputs in the computation
of the MST configuration Identifier. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.8 |
| rcMstpBridgeRegionEditRevLevel Set revision level, the inputs will be actived after active
operation.
This object identifies the MST revision that identifies the
MST region and is used as one of the inp… | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.24.2.9 |